summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLucas Stach <dev@lynxeye.de>2012-10-07 11:29:38 +0000
committerTom Warren <twarren@nvidia.com>2012-10-29 09:07:05 -0700
commita833b95039a08cd52980f95564b567c8b3138cfe (patch)
treead1a1660bffc6e0490a8153eb639d64a2b055a20 /drivers
parent56f42f85f5a14040fb0e74fd6cad3910643830d6 (diff)
downloadu-boot-imx-a833b95039a08cd52980f95564b567c8b3138cfe.zip
u-boot-imx-a833b95039a08cd52980f95564b567c8b3138cfe.tar.gz
u-boot-imx-a833b95039a08cd52980f95564b567c8b3138cfe.tar.bz2
tegra: nand: make ONFI detection work
Add the missing bits to the Tegra NAND driver to make ONFI detection work properly. Also add it to the Tegra default config, as it seems to be a reasonable thing to have it available on all boards that use any kind of NAND. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/nand/tegra_nand.c36
1 files changed, 36 insertions, 0 deletions
diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c
index 5408c51..4d94cc6 100644
--- a/drivers/mtd/nand/tegra_nand.c
+++ b/drivers/mtd/nand/tegra_nand.c
@@ -219,6 +219,34 @@ static uint8_t read_byte(struct mtd_info *mtd)
}
/**
+ * Read len bytes from the chip into a buffer
+ *
+ * @param mtd MTD device structure
+ * @param buf buffer to store data to
+ * @param len number of bytes to read
+ *
+ * Read function for 8bit bus-width
+ */
+static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i, s;
+ unsigned int reg;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_drv *info = (struct nand_drv *)chip->priv;
+
+ for (i = 0; i < len; i += 4) {
+ s = (len - i) > 4 ? 4 : len - i;
+ writel(CMD_PIO | CMD_RX | CMD_A_VALID | CMD_CE0 |
+ ((s - 1) << CMD_TRANS_SIZE_SHIFT) | CMD_GO,
+ &info->reg->command);
+ if (!nand_waitfor_cmd_completion(info->reg))
+ puts("Command timeout during read_buf\n");
+ reg = readl(&info->reg->resp);
+ memcpy(buf + i, &reg, s);
+ }
+}
+
+/**
* Check NAND status to see if it is ready or not
*
* @param mtd MTD device structure
@@ -317,6 +345,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
switch (command) {
case NAND_CMD_READID:
writel(NAND_CMD_READID, &info->reg->cmd_reg1);
+ writel(column & 0xFF, &info->reg->addr_reg1);
writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_PIO
| CMD_RX |
((4 - 1) << CMD_TRANS_SIZE_SHIFT)
@@ -324,6 +353,12 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
&info->reg->command);
info->pio_byte_index = 0;
break;
+ case NAND_CMD_PARAM:
+ writel(NAND_CMD_PARAM, &info->reg->cmd_reg1);
+ writel(column & 0xFF, &info->reg->addr_reg1);
+ writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_CE0,
+ &info->reg->command);
+ break;
case NAND_CMD_READ0:
writel(NAND_CMD_READ0, &info->reg->cmd_reg1);
writel(NAND_CMD_READSTART, &info->reg->cmd_reg2);
@@ -976,6 +1011,7 @@ int tegra_nand_init(struct nand_chip *nand, int devnum)
nand->options = LP_OPTIONS;
nand->cmdfunc = nand_command;
nand->read_byte = read_byte;
+ nand->read_buf = read_buf;
nand->ecc.read_page = nand_read_page_hwecc;
nand->ecc.write_page = nand_write_page_hwecc;
nand->ecc.read_page_raw = nand_read_page_raw;