summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2009-10-24 22:26:09 +0200
committerWolfgang Denk <wd@denx.de>2009-10-24 22:26:09 +0200
commit922754cc82a82ac90e486b7565a148c9e4b6b584 (patch)
tree7f42bd45ddc7ba92343446af911a4ac5d71cc874 /drivers
parent4ee63268152594bb7af6bec2b59d53bba68082bf (diff)
parent4bc3d2afb380e78fdbb9c501d9a8da6d59eb178e (diff)
downloadu-boot-imx-922754cc82a82ac90e486b7565a148c9e4b6b584.zip
u-boot-imx-922754cc82a82ac90e486b7565a148c9e4b6b584.tar.gz
u-boot-imx-922754cc82a82ac90e486b7565a148c9e4b6b584.tar.bz2
Merge branch 'master-sync' of git://git.denx.de/u-boot-arm
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/s3c24x0_i2c.c273
-rw-r--r--drivers/mtd/nand/s3c2410_nand.c62
-rw-r--r--drivers/mtd/onenand/Makefile1
-rw-r--r--drivers/mtd/onenand/samsung.c636
-rw-r--r--drivers/net/smc911x.c12
-rw-r--r--drivers/rtc/s3c24x0_rtc.c130
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/serial_s3c24x0.c160
-rw-r--r--drivers/serial/serial_s5pc1xx.c195
9 files changed, 1160 insertions, 310 deletions
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index f0c1aa3..55c6a12 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -32,6 +32,8 @@
#elif defined(CONFIG_S3C2410)
#include <s3c2410.h>
#endif
+
+#include <asm/io.h>
#include <i2c.h>
#ifdef CONFIG_HARD_I2C
@@ -42,142 +44,139 @@
#define I2C_OK 0
#define I2C_NOK 1
#define I2C_NACK 2
-#define I2C_NOK_LA 3 /* Lost arbitration */
-#define I2C_NOK_TOUT 4 /* time out */
-
-#define I2CSTAT_BSY 0x20 /* Busy bit */
-#define I2CSTAT_NACK 0x01 /* Nack bit */
-#define I2CCON_IRPND 0x10 /* Interrupt pending bit */
-#define I2C_MODE_MT 0xC0 /* Master Transmit Mode */
-#define I2C_MODE_MR 0x80 /* Master Receive Mode */
-#define I2C_START_STOP 0x20 /* START / STOP */
-#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */
+#define I2C_NOK_LA 3 /* Lost arbitration */
+#define I2C_NOK_TOUT 4 /* time out */
-#define I2C_TIMEOUT 1 /* 1 second */
+#define I2CSTAT_BSY 0x20 /* Busy bit */
+#define I2CSTAT_NACK 0x01 /* Nack bit */
+#define I2CCON_IRPND 0x10 /* Interrupt pending bit */
+#define I2C_MODE_MT 0xC0 /* Master Transmit Mode */
+#define I2C_MODE_MR 0x80 /* Master Receive Mode */
+#define I2C_START_STOP 0x20 /* START / STOP */
+#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */
+#define I2C_TIMEOUT 1 /* 1 second */
static int GetI2CSDA(void)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
#ifdef CONFIG_S3C2410
- return (gpio->GPEDAT & 0x8000) >> 15;
+ return (readl(&gpio->GPEDAT) & 0x8000) >> 15;
#endif
#ifdef CONFIG_S3C2400
- return (gpio->PGDAT & 0x0020) >> 5;
+ return (readl(&gpio->PGDAT) & 0x0020) >> 5;
#endif
}
#if 0
static void SetI2CSDA(int x)
{
- rGPEDAT = (rGPEDAT & ~0x8000) | (x&1) << 15;
+ rGPEDAT = (rGPEDAT & ~0x8000) | (x & 1) << 15;
}
#endif
static void SetI2CSCL(int x)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
#ifdef CONFIG_S3C2410
- gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
+ writel((readl(&gpio->GPEDAT) & ~0x4000) | (x & 1) << 14, &gpio->GPEDAT);
#endif
#ifdef CONFIG_S3C2400
- gpio->PGDAT = (gpio->PGDAT & ~0x0040) | (x&1) << 6;
+ writel((readl(&gpio->PGDAT) & ~0x0040) | (x & 1) << 6, &gpio->PGDAT);
#endif
}
-
-static int WaitForXfer (void)
+static int WaitForXfer(void)
{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- int i, status;
+ struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+ int i;
i = I2C_TIMEOUT * 10000;
- status = i2c->IICCON;
- while ((i > 0) && !(status & I2CCON_IRPND)) {
- udelay (100);
- status = i2c->IICCON;
+ while (!(readl(&i2c->IICCON) & I2CCON_IRPND) && (i > 0)) {
+ udelay(100);
i--;
}
- return (status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
+ return (readl(&i2c->IICCON) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
}
-static int IsACK (void)
+static int IsACK(void)
{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+ struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
- return (!(i2c->IICSTAT & I2CSTAT_NACK));
+ return !(readl(&i2c->IICSTAT) & I2CSTAT_NACK);
}
-static void ReadWriteByte (void)
+static void ReadWriteByte(void)
{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+ struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
- i2c->IICCON &= ~I2CCON_IRPND;
+ writel(readl(&i2c->IICCON) & ~I2CCON_IRPND, &i2c->IICCON);
}
-void i2c_init (int speed, int slaveadd)
+void i2c_init(int speed, int slaveadd)
{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- S3C24X0_GPIO *const gpio = S3C24X0_GetBase_GPIO ();
+ struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+ struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
ulong freq, pres = 16, div;
- int i, status;
+ int i;
/* wait for some time to give previous transfer a chance to finish */
i = I2C_TIMEOUT * 1000;
- status = i2c->IICSTAT;
- while ((i > 0) && (status & I2CSTAT_BSY)) {
- udelay (1000);
- status = i2c->IICSTAT;
+ while ((readl(&i2c->IICSTAT) && I2CSTAT_BSY) && (i > 0)) {
+ udelay(1000);
i--;
}
- if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) {
+ if ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) || GetI2CSDA() == 0) {
#ifdef CONFIG_S3C2410
- ulong old_gpecon = gpio->GPECON;
+ ulong old_gpecon = readl(&gpio->GPECON);
#endif
#ifdef CONFIG_S3C2400
- ulong old_gpecon = gpio->PGCON;
+ ulong old_gpecon = readl(&gpio->PGCON);
#endif
- /* bus still busy probably by (most) previously interrupted transfer */
+ /* bus still busy probably by (most) previously interrupted
+ transfer */
#ifdef CONFIG_S3C2410
/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
- gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
+ writel((readl(&gpio->GPECON) & ~0xF0000000) | 0x10000000,
+ &gpio->GPECON);
#endif
#ifdef CONFIG_S3C2400
/* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
- gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00001000;
+ writel((readl(&gpio->PGCON) & ~0x00003c00) | 0x00001000,
+ &gpio->PGCON);
#endif
/* toggle I2CSCL until bus idle */
- SetI2CSCL (0);
- udelay (1000);
+ SetI2CSCL(0);
+ udelay(1000);
i = 10;
- while ((i > 0) && (GetI2CSDA () != 1)) {
- SetI2CSCL (1);
- udelay (1000);
- SetI2CSCL (0);
- udelay (1000);
+ while ((i > 0) && (GetI2CSDA() != 1)) {
+ SetI2CSCL(1);
+ udelay(1000);
+ SetI2CSCL(0);
+ udelay(1000);
i--;
}
- SetI2CSCL (1);
- udelay (1000);
+ SetI2CSCL(1);
+ udelay(1000);
/* restore pin functions */
#ifdef CONFIG_S3C2410
- gpio->GPECON = old_gpecon;
+ writel(old_gpecon, &gpio->GPECON);
#endif
#ifdef CONFIG_S3C2400
- gpio->PGCON = old_gpecon;
+ writel(old_gpecon, &gpio->PGCON);
#endif
}
/* calculate prescaler and divisor values */
- freq = get_PCLK ();
+ freq = get_PCLK();
if ((freq / pres / (16 + 1)) > speed)
/* set prescaler to 512 */
pres = 512;
@@ -188,13 +187,13 @@ void i2c_init (int speed, int slaveadd)
/* set prescaler, divisor according to freq, also set
* ACKGEN, IRQ */
- i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0);
+ writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->IICCON);
/* init to SLAVE REVEIVE and set slaveaddr */
- i2c->IICSTAT = 0;
- i2c->IICADD = slaveadd;
+ writel(0, &i2c->IICSTAT);
+ writel(slaveadd, &i2c->IICADD);
/* program Master Transmit (and implicit STOP) */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
+ writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT);
}
@@ -206,107 +205,109 @@ void i2c_init (int speed, int slaveadd)
* 0 we skip the address write cycle.
*/
static
-int i2c_transfer (unsigned char cmd_type,
- unsigned char chip,
- unsigned char addr[],
- unsigned char addr_len,
- unsigned char data[], unsigned short data_len)
+int i2c_transfer(unsigned char cmd_type,
+ unsigned char chip,
+ unsigned char addr[],
+ unsigned char addr_len,
+ unsigned char data[], unsigned short data_len)
{
- S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- int i, status, result;
+ struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+ int i, result;
if (data == 0 || data_len == 0) {
/*Don't support data transfer of no length or to address 0 */
- printf ("i2c_transfer: bad call\n");
+ printf("i2c_transfer: bad call\n");
return I2C_NOK;
}
/* Check I2C bus idle */
i = I2C_TIMEOUT * 1000;
- status = i2c->IICSTAT;
- while ((i > 0) && (status & I2CSTAT_BSY)) {
- udelay (1000);
- status = i2c->IICSTAT;
+ while ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) && (i > 0)) {
+ udelay(1000);
i--;
}
- if (status & I2CSTAT_BSY)
+ if (readl(&i2c->IICSTAT) & I2CSTAT_BSY)
return I2C_NOK_TOUT;
- i2c->IICCON |= 0x80;
+ writel(readl(&i2c->IICCON) | 0x80, &i2c->IICCON);
result = I2C_OK;
switch (cmd_type) {
case I2C_WRITE:
if (addr && addr_len) {
- i2c->IICDS = chip;
+ writel(chip, &i2c->IICDS);
/* send START */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+ writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+ &i2c->IICSTAT);
i = 0;
while ((i < addr_len) && (result == I2C_OK)) {
- result = WaitForXfer ();
- i2c->IICDS = addr[i];
- ReadWriteByte ();
+ result = WaitForXfer();
+ writel(addr[i], &i2c->IICDS);
+ ReadWriteByte();
i++;
}
i = 0;
while ((i < data_len) && (result == I2C_OK)) {
- result = WaitForXfer ();
- i2c->IICDS = data[i];
- ReadWriteByte ();
+ result = WaitForXfer();
+ writel(data[i], &i2c->IICDS);
+ ReadWriteByte();
i++;
}
} else {
- i2c->IICDS = chip;
+ writel(chip, &i2c->IICDS);
/* send START */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+ writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+ &i2c->IICSTAT);
i = 0;
while ((i < data_len) && (result = I2C_OK)) {
- result = WaitForXfer ();
- i2c->IICDS = data[i];
- ReadWriteByte ();
+ result = WaitForXfer();
+ writel(data[i], &i2c->IICDS);
+ ReadWriteByte();
i++;
}
}
if (result == I2C_OK)
- result = WaitForXfer ();
+ result = WaitForXfer();
/* send STOP */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- ReadWriteByte ();
+ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+ ReadWriteByte();
break;
case I2C_READ:
if (addr && addr_len) {
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
- i2c->IICDS = chip;
+ writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT);
+ writel(chip, &i2c->IICDS);
/* send START */
- i2c->IICSTAT |= I2C_START_STOP;
- result = WaitForXfer ();
- if (IsACK ()) {
+ writel(readl(&i2c->IICSTAT) | I2C_START_STOP,
+ &i2c->IICSTAT);
+ result = WaitForXfer();
+ if (IsACK()) {
i = 0;
while ((i < addr_len) && (result == I2C_OK)) {
- i2c->IICDS = addr[i];
- ReadWriteByte ();
- result = WaitForXfer ();
+ writel(addr[i], &i2c->IICDS);
+ ReadWriteByte();
+ result = WaitForXfer();
i++;
}
- i2c->IICDS = chip;
+ writel(chip, &i2c->IICDS);
/* resend START */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA |
- I2C_START_STOP;
- ReadWriteByte ();
- result = WaitForXfer ();
+ writel(I2C_MODE_MR | I2C_TXRX_ENA |
+ I2C_START_STOP, &i2c->IICSTAT);
+ ReadWriteByte();
+ result = WaitForXfer();
i = 0;
while ((i < data_len) && (result == I2C_OK)) {
/* disable ACK for final READ */
if (i == data_len - 1)
- i2c->IICCON &= ~0x80;
- ReadWriteByte ();
- result = WaitForXfer ();
- data[i] = i2c->IICDS;
+ writel(readl(&i2c->IICCON)
+ & ~0x80, &i2c->IICCON);
+ ReadWriteByte();
+ result = WaitForXfer();
+ data[i] = readl(&i2c->IICDS);
i++;
}
} else {
@@ -314,21 +315,23 @@ int i2c_transfer (unsigned char cmd_type,
}
} else {
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- i2c->IICDS = chip;
+ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+ writel(chip, &i2c->IICDS);
/* send START */
- i2c->IICSTAT |= I2C_START_STOP;
- result = WaitForXfer ();
+ writel(readl(&i2c->IICSTAT) | I2C_START_STOP,
+ &i2c->IICSTAT);
+ result = WaitForXfer();
- if (IsACK ()) {
+ if (IsACK()) {
i = 0;
while ((i < data_len) && (result == I2C_OK)) {
/* disable ACK for final READ */
if (i == data_len - 1)
- i2c->IICCON &= ~0x80;
- ReadWriteByte ();
- result = WaitForXfer ();
- data[i] = i2c->IICDS;
+ writel(readl(&i2c->IICCON) &
+ ~0x80, &i2c->IICCON);
+ ReadWriteByte();
+ result = WaitForXfer();
+ data[i] = readl(&i2c->IICDS);
i++;
}
} else {
@@ -337,12 +340,12 @@ int i2c_transfer (unsigned char cmd_type,
}
/* send STOP */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- ReadWriteByte ();
+ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+ ReadWriteByte();
break;
default:
- printf ("i2c_transfer: bad call\n");
+ printf("i2c_transfer: bad call\n");
result = I2C_NOK;
break;
}
@@ -350,7 +353,7 @@ int i2c_transfer (unsigned char cmd_type,
return (result);
}
-int i2c_probe (uchar chip)
+int i2c_probe(uchar chip)
{
uchar buf[1];
@@ -361,16 +364,16 @@ int i2c_probe (uchar chip)
* address was <ACK>ed (i.e. there was a chip at that address which
* drove the data line low).
*/
- return (i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK);
+ return i2c_transfer(I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK;
}
-int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
uchar xaddr[4];
int ret;
if (alen > 4) {
- printf ("I2C read: addr len %d not supported\n", alen);
+ printf("I2C read: addr len %d not supported\n", alen);
return 1;
}
@@ -394,23 +397,24 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
* hidden in the chip address.
*/
if (alen > 0)
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) &
+ CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
if ((ret =
- i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen,
- buffer, len)) != 0) {
- printf ("I2c read: failed %d\n", ret);
+ i2c_transfer(I2C_READ, chip << 1, &xaddr[4 - alen], alen,
+ buffer, len)) != 0) {
+ printf("I2c read: failed %d\n", ret);
return 1;
}
return 0;
}
-int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
uchar xaddr[4];
if (alen > 4) {
- printf ("I2C write: addr len %d not supported\n", alen);
+ printf("I2C write: addr len %d not supported\n", alen);
return 1;
}
@@ -433,10 +437,11 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
* hidden in the chip address.
*/
if (alen > 0)
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) &
+ CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
return (i2c_transfer
(I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
len) != 0);
}
-#endif /* CONFIG_HARD_I2C */
+#endif /* CONFIG_HARD_I2C */
diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c
index d27a625..f2f3e72 100644
--- a/drivers/mtd/nand/s3c2410_nand.c
+++ b/drivers/mtd/nand/s3c2410_nand.c
@@ -20,29 +20,10 @@
#include <common.h>
-#if 0
-#define DEBUGN printf
-#else
-#define DEBUGN(x, args ...) {}
-#endif
-
#include <nand.h>
#include <s3c2410.h>
#include <asm/io.h>
-#define __REGb(x) (*(volatile unsigned char *)(x))
-#define __REGi(x) (*(volatile unsigned int *)(x))
-
-#define NF_BASE 0x4e000000
-#define NFCONF __REGi(NF_BASE + 0x0)
-#define NFCMD __REGb(NF_BASE + 0x4)
-#define NFADDR __REGb(NF_BASE + 0x8)
-#define NFDATA __REGb(NF_BASE + 0xc)
-#define NFSTAT __REGb(NF_BASE + 0x10)
-#define NFECC0 __REGb(NF_BASE + 0x14)
-#define NFECC1 __REGb(NF_BASE + 0x15)
-#define NFECC2 __REGb(NF_BASE + 0x16)
-
#define S3C2410_NFCONF_EN (1<<15)
#define S3C2410_NFCONF_512BYTE (1<<14)
#define S3C2410_NFCONF_4STEP (1<<13)
@@ -58,11 +39,12 @@
static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
+ struct s3c2410_nand *nand = s3c2410_get_base_nand();
- DEBUGN("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
+ debugX(1, "hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
if (ctrl & NAND_CTRL_CHANGE) {
- ulong IO_ADDR_W = NF_BASE;
+ ulong IO_ADDR_W = (ulong)nand;
if (!(ctrl & NAND_CLE))
IO_ADDR_W |= S3C2410_ADDR_NCLE;
@@ -72,9 +54,11 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
chip->IO_ADDR_W = (void *)IO_ADDR_W;
if (ctrl & NAND_NCE)
- NFCONF &= ~S3C2410_NFCONF_nFCE;
+ writel(readl(&nand->NFCONF) & ~S3C2410_NFCONF_nFCE,
+ &nand->NFCONF);
else
- NFCONF |= S3C2410_NFCONF_nFCE;
+ writel(readl(&nand->NFCONF) | S3C2410_NFCONF_nFCE,
+ &nand->NFCONF);
}
if (cmd != NAND_CMD_NONE)
@@ -83,15 +67,17 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
static int s3c2410_dev_ready(struct mtd_info *mtd)
{
- DEBUGN("dev_ready\n");
- return (NFSTAT & 0x01);
+ struct s3c2410_nand *nand = s3c2410_get_base_nand();
+ debugX(1, "dev_ready\n");
+ return readl(&nand->NFSTAT) & 0x01;
}
#ifdef CONFIG_S3C2410_NAND_HWECC
void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
- DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
- NFCONF |= S3C2410_NFCONF_INITECC;
+ struct s3c2410_nand *nand = s3c2410_get_base_nand();
+ debugX(1, "s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
+ writel(readl(&nand->NFCONF) | S3C2410_NFCONF_INITECC, &nand->NFCONF);
}
static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
@@ -100,8 +86,8 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
ecc_code[0] = NFECC0;
ecc_code[1] = NFECC1;
ecc_code[2] = NFECC2;
- DEBUGN("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
- mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
+ debugX(1, "s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
+ mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
return 0;
}
@@ -123,24 +109,26 @@ int board_nand_init(struct nand_chip *nand)
{
u_int32_t cfg;
u_int8_t tacls, twrph0, twrph1;
- S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+ struct s3c2410_nand *nand_reg = s3c2410_get_base_nand();
- DEBUGN("board_nand_init()\n");
+ debugX(1, "board_nand_init()\n");
- clk_power->CLKCON |= (1 << 4);
+ writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON);
/* initialize hardware */
- twrph0 = 3; twrph1 = 0; tacls = 0;
+ twrph0 = 3;
+ twrph1 = 0;
+ tacls = 0;
cfg = S3C2410_NFCONF_EN;
cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
-
- NFCONF = cfg;
+ writel(cfg, &nand_reg->NFCONF);
/* initialize nand_chip data structure */
- nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)0x4e00000c;
+ nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)&nand_reg->NFDATA;
/* read_buf and write_buf are default */
/* read_byte and write_byte are default */
@@ -165,7 +153,7 @@ int board_nand_init(struct nand_chip *nand)
nand->options = 0;
#endif
- DEBUGN("end of nand_init\n");
+ debugX(1, "end of nand_init\n");
return 0;
}
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 1d35a57..2571df0 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libonenand.a
COBJS-$(CONFIG_CMD_ONENAND) := onenand_uboot.o onenand_base.o onenand_bbt.o
+COBJS-$(CONFIG_SAMSUNG_ONENAND) += samsung.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
new file mode 100644
index 0000000..f2be687
--- /dev/null
+++ b/drivers/mtd/onenand/samsung.c
@@ -0,0 +1,636 @@
+/*
+ * S3C64XX/S5PC100 OneNAND driver at U-Boot
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Implementation:
+ * Emulate the pseudo BufferRAM
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/samsung_onenand.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#ifdef ONENAND_DEBUG
+#define DPRINTK(format, args...) \
+do { \
+ printf("%s[%d]: " format "\n", __func__, __LINE__, ##args); \
+} while (0)
+#else
+#define DPRINTK(...) do { } while (0)
+#endif
+
+#define ONENAND_ERASE_STATUS 0x00
+#define ONENAND_MULTI_ERASE_SET 0x01
+#define ONENAND_ERASE_START 0x03
+#define ONENAND_UNLOCK_START 0x08
+#define ONENAND_UNLOCK_END 0x09
+#define ONENAND_LOCK_START 0x0A
+#define ONENAND_LOCK_END 0x0B
+#define ONENAND_LOCK_TIGHT_START 0x0C
+#define ONENAND_LOCK_TIGHT_END 0x0D
+#define ONENAND_UNLOCK_ALL 0x0E
+#define ONENAND_OTP_ACCESS 0x12
+#define ONENAND_SPARE_ACCESS_ONLY 0x13
+#define ONENAND_MAIN_ACCESS_ONLY 0x14
+#define ONENAND_ERASE_VERIFY 0x15
+#define ONENAND_MAIN_SPARE_ACCESS 0x16
+#define ONENAND_PIPELINE_READ 0x4000
+
+#if defined(CONFIG_S3C64XX)
+#define MAP_00 (0x0 << 24)
+#define MAP_01 (0x1 << 24)
+#define MAP_10 (0x2 << 24)
+#define MAP_11 (0x3 << 24)
+#elif defined(CONFIG_S5PC1XX)
+#define MAP_00 (0x0 << 26)
+#define MAP_01 (0x1 << 26)
+#define MAP_10 (0x2 << 26)
+#define MAP_11 (0x3 << 26)
+#endif
+
+/* read/write of XIP buffer */
+#define CMD_MAP_00(mem_addr) (MAP_00 | ((mem_addr) << 1))
+/* read/write to the memory device */
+#define CMD_MAP_01(mem_addr) (MAP_01 | (mem_addr))
+/* control special functions of the memory device */
+#define CMD_MAP_10(mem_addr) (MAP_10 | (mem_addr))
+/* direct interface(direct access) with the memory device */
+#define CMD_MAP_11(mem_addr) (MAP_11 | ((mem_addr) << 2))
+
+struct s3c_onenand {
+ struct mtd_info *mtd;
+ void __iomem *base;
+ void __iomem *ahb_addr;
+ int bootram_command;
+ void __iomem *page_buf;
+ void __iomem *oob_buf;
+ unsigned int (*mem_addr)(int fba, int fpa, int fsa);
+ struct samsung_onenand *reg;
+};
+
+static struct s3c_onenand *onenand;
+
+static int s3c_read_cmd(unsigned int cmd)
+{
+ return readl(onenand->ahb_addr + cmd);
+}
+
+static void s3c_write_cmd(int value, unsigned int cmd)
+{
+ writel(value, onenand->ahb_addr + cmd);
+}
+
+/*
+ * MEM_ADDR
+ *
+ * fba: flash block address
+ * fpa: flash page address
+ * fsa: flash sector address
+ *
+ * return the buffer address on the memory device
+ * It will be combined with CMD_MAP_XX
+ */
+#if defined(CONFIG_S3C64XX)
+static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
+{
+ return (fba << 12) | (fpa << 6) | (fsa << 4);
+}
+#elif defined(CONFIG_S5PC1XX)
+static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
+{
+ return (fba << 13) | (fpa << 7) | (fsa << 5);
+}
+#endif
+
+static void s3c_onenand_reset(void)
+{
+ unsigned long timeout = 0x10000;
+ int stat;
+
+ writel(ONENAND_MEM_RESET_COLD, &onenand->reg->mem_reset);
+ while (timeout--) {
+ stat = readl(&onenand->reg->int_err_stat);
+ if (stat & RST_CMP)
+ break;
+ }
+ stat = readl(&onenand->reg->int_err_stat);
+ writel(stat, &onenand->reg->int_err_ack);
+
+ /* Clear interrupt */
+ writel(0x0, &onenand->reg->int_err_ack);
+ /* Clear the ECC status */
+ writel(0x0, &onenand->reg->ecc_err_stat);
+}
+
+static unsigned short s3c_onenand_readw(void __iomem *addr)
+{
+ struct onenand_chip *this = onenand->mtd->priv;
+ int reg = addr - this->base;
+ int word_addr = reg >> 1;
+ int value;
+
+ /* It's used for probing time */
+ switch (reg) {
+ case ONENAND_REG_MANUFACTURER_ID:
+ return readl(&onenand->reg->manufact_id);
+ case ONENAND_REG_DEVICE_ID:
+ return readl(&onenand->reg->device_id);
+ case ONENAND_REG_VERSION_ID:
+ return readl(&onenand->reg->flash_ver_id);
+ case ONENAND_REG_DATA_BUFFER_SIZE:
+ return readl(&onenand->reg->data_buf_size);
+ case ONENAND_REG_TECHNOLOGY:
+ return readl(&onenand->reg->tech);
+ case ONENAND_REG_SYS_CFG1:
+ return readl(&onenand->reg->mem_cfg);
+
+ /* Used at unlock all status */
+ case ONENAND_REG_CTRL_STATUS:
+ return 0;
+
+ case ONENAND_REG_WP_STATUS:
+ return ONENAND_WP_US;
+
+ default:
+ break;
+ }
+
+ /* BootRAM access control */
+ if (reg < ONENAND_DATARAM && onenand->bootram_command) {
+ if (word_addr == 0)
+ return readl(&onenand->reg->manufact_id);
+ if (word_addr == 1)
+ return readl(&onenand->reg->device_id);
+ if (word_addr == 2)
+ return readl(&onenand->reg->flash_ver_id);
+ }
+
+ value = s3c_read_cmd(CMD_MAP_11(word_addr)) & 0xffff;
+ printk(KERN_INFO "s3c_onenand_readw: Illegal access"
+ " at reg 0x%x, value 0x%x\n", word_addr, value);
+ return value;
+}
+
+static void s3c_onenand_writew(unsigned short value, void __iomem *addr)
+{
+ struct onenand_chip *this = onenand->mtd->priv;
+ int reg = addr - this->base;
+ int word_addr = reg >> 1;
+
+ /* It's used for probing time */
+ switch (reg) {
+ case ONENAND_REG_SYS_CFG1:
+ writel(value, &onenand->reg->mem_cfg);
+ return;
+
+ case ONENAND_REG_START_ADDRESS1:
+ case ONENAND_REG_START_ADDRESS2:
+ return;
+
+ /* Lock/lock-tight/unlock/unlock_all */
+ case ONENAND_REG_START_BLOCK_ADDRESS:
+ return;
+
+ default:
+ break;
+ }
+
+ /* BootRAM access control */
+ if (reg < ONENAND_DATARAM) {
+ if (value == ONENAND_CMD_READID) {
+ onenand->bootram_command = 1;
+ return;
+ }
+ if (value == ONENAND_CMD_RESET) {
+ writel(ONENAND_MEM_RESET_COLD,
+ &onenand->reg->mem_reset);
+ onenand->bootram_command = 0;
+ return;
+ }
+ }
+
+ printk(KERN_INFO "s3c_onenand_writew: Illegal access"
+ " at reg 0x%x, value 0x%x\n", word_addr, value);
+
+ s3c_write_cmd(value, CMD_MAP_11(word_addr));
+}
+
+static int s3c_onenand_wait(struct mtd_info *mtd, int state)
+{
+ unsigned int flags = INT_ACT;
+ unsigned int stat, ecc;
+ unsigned long timeout = 0x100000;
+
+ switch (state) {
+ case FL_READING:
+ flags |= BLK_RW_CMP | LOAD_CMP;
+ break;
+ case FL_WRITING:
+ flags |= BLK_RW_CMP | PGM_CMP;
+ break;
+ case FL_ERASING:
+ flags |= BLK_RW_CMP | ERS_CMP;
+ break;
+ case FL_LOCKING:
+ flags |= BLK_RW_CMP;
+ break;
+ default:
+ break;
+ }
+
+ while (timeout--) {
+ stat = readl(&onenand->reg->int_err_stat);
+ if (stat & flags)
+ break;
+ }
+
+ /* To get correct interrupt status in timeout case */
+ stat = readl(&onenand->reg->int_err_stat);
+ writel(stat, &onenand->reg->int_err_ack);
+
+ /*
+ * In the Spec. it checks the controller status first
+ * However if you get the correct information in case of
+ * power off recovery (POR) test, it should read ECC status first
+ */
+ if (stat & LOAD_CMP) {
+ ecc = readl(&onenand->reg->ecc_err_stat);
+ if (ecc & ONENAND_ECC_4BIT_UNCORRECTABLE) {
+ printk(KERN_INFO "%s: ECC error = 0x%04x\n",
+ __func__, ecc);
+ mtd->ecc_stats.failed++;
+ return -EBADMSG;
+ }
+ }
+
+ if (stat & (LOCKED_BLK | ERS_FAIL | PGM_FAIL | LD_FAIL_ECC_ERR)) {
+ printk(KERN_INFO "%s: controller error = 0x%04x\n",
+ __func__, stat);
+ if (stat & LOCKED_BLK)
+ printk(KERN_INFO "%s: it's locked error = 0x%04x\n",
+ __func__, stat);
+
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int s3c_onenand_command(struct mtd_info *mtd, int cmd,
+ loff_t addr, size_t len)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned int *m, *s;
+ int fba, fpa, fsa = 0;
+ unsigned int mem_addr;
+ int i, mcount, scount;
+ int index;
+
+ fba = (int) (addr >> this->erase_shift);
+ fpa = (int) (addr >> this->page_shift);
+ fpa &= this->page_mask;
+
+ mem_addr = onenand->mem_addr(fba, fpa, fsa);
+
+ switch (cmd) {
+ case ONENAND_CMD_READ:
+ case ONENAND_CMD_READOOB:
+ case ONENAND_CMD_BUFFERRAM:
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ default:
+ break;
+ }
+
+ index = ONENAND_CURRENT_BUFFERRAM(this);
+
+ /*
+ * Emulate Two BufferRAMs and access with 4 bytes pointer
+ */
+ m = (unsigned int *) onenand->page_buf;
+ s = (unsigned int *) onenand->oob_buf;
+
+ if (index) {
+ m += (this->writesize >> 2);
+ s += (mtd->oobsize >> 2);
+ }
+
+ mcount = mtd->writesize >> 2;
+ scount = mtd->oobsize >> 2;
+
+ switch (cmd) {
+ case ONENAND_CMD_READ:
+ /* Main */
+ for (i = 0; i < mcount; i++)
+ *m++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+ return 0;
+
+ case ONENAND_CMD_READOOB:
+ writel(TSRF, &onenand->reg->trans_spare);
+ /* Main */
+ for (i = 0; i < mcount; i++)
+ *m++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+
+ /* Spare */
+ for (i = 0; i < scount; i++)
+ *s++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+
+ writel(0, &onenand->reg->trans_spare);
+ return 0;
+
+ case ONENAND_CMD_PROG:
+ /* Main */
+ for (i = 0; i < mcount; i++)
+ s3c_write_cmd(*m++, CMD_MAP_01(mem_addr));
+ return 0;
+
+ case ONENAND_CMD_PROGOOB:
+ writel(TSRF, &onenand->reg->trans_spare);
+
+ /* Main - dummy write */
+ for (i = 0; i < mcount; i++)
+ s3c_write_cmd(0xffffffff, CMD_MAP_01(mem_addr));
+
+ /* Spare */
+ for (i = 0; i < scount; i++)
+ s3c_write_cmd(*s++, CMD_MAP_01(mem_addr));
+
+ writel(0, &onenand->reg->trans_spare);
+ return 0;
+
+ case ONENAND_CMD_UNLOCK_ALL:
+ s3c_write_cmd(ONENAND_UNLOCK_ALL, CMD_MAP_10(mem_addr));
+ return 0;
+
+ case ONENAND_CMD_ERASE:
+ s3c_write_cmd(ONENAND_ERASE_START, CMD_MAP_10(mem_addr));
+ return 0;
+
+ case ONENAND_CMD_MULTIBLOCK_ERASE:
+ s3c_write_cmd(ONENAND_MULTI_ERASE_SET, CMD_MAP_10(mem_addr));
+ return 0;
+
+ case ONENAND_CMD_ERASE_VERIFY:
+ s3c_write_cmd(ONENAND_ERASE_VERIFY, CMD_MAP_10(mem_addr));
+ return 0;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static unsigned char *s3c_get_bufferram(struct mtd_info *mtd, int area)
+{
+ struct onenand_chip *this = mtd->priv;
+ int index = ONENAND_CURRENT_BUFFERRAM(this);
+ unsigned char *p;
+
+ if (area == ONENAND_DATARAM) {
+ p = (unsigned char *) onenand->page_buf;
+ if (index == 1)
+ p += this->writesize;
+ } else {
+ p = (unsigned char *) onenand->oob_buf;
+ if (index == 1)
+ p += mtd->oobsize;
+ }
+
+ return p;
+}
+
+static int onenand_read_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ unsigned char *p;
+
+ p = s3c_get_bufferram(mtd, area);
+ memcpy(buffer, p + offset, count);
+ return 0;
+}
+
+static int onenand_write_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+ const unsigned char *buffer, int offset,
+ size_t count)
+{
+ unsigned char *p;
+
+ p = s3c_get_bufferram(mtd, area);
+ memcpy(p + offset, buffer, count);
+ return 0;
+}
+
+static int s3c_onenand_bbt_wait(struct mtd_info *mtd, int state)
+{
+ struct samsung_onenand *reg = (struct samsung_onenand *)onenand->base;
+ unsigned int flags = INT_ACT | LOAD_CMP;
+ unsigned int stat;
+ unsigned long timeout = 0x10000;
+
+ while (timeout--) {
+ stat = readl(&reg->int_err_stat);
+ if (stat & flags)
+ break;
+ }
+ /* To get correct interrupt status in timeout case */
+ stat = readl(&onenand->reg->int_err_stat);
+ writel(stat, &onenand->reg->int_err_ack);
+
+ if (stat & LD_FAIL_ECC_ERR) {
+ s3c_onenand_reset();
+ return ONENAND_BBT_READ_ERROR;
+ }
+
+ if (stat & LOAD_CMP) {
+ int ecc = readl(&onenand->reg->ecc_err_stat);
+ if (ecc & ONENAND_ECC_4BIT_UNCORRECTABLE) {
+ s3c_onenand_reset();
+ return ONENAND_BBT_READ_ERROR;
+ }
+ }
+
+ return 0;
+}
+
+static void s3c_onenand_check_lock_status(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned int block, end;
+ int tmp;
+
+ end = this->chipsize >> this->erase_shift;
+
+ for (block = 0; block < end; block++) {
+ tmp = s3c_read_cmd(CMD_MAP_01(onenand->mem_addr(block, 0, 0)));
+
+ if (readl(&onenand->reg->int_err_stat) & LOCKED_BLK) {
+ printf("block %d is write-protected!\n", block);
+ writel(LOCKED_BLK, &onenand->reg->int_err_ack);
+ }
+ }
+}
+
+static void s3c_onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs,
+ size_t len, int cmd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int start, end, start_mem_addr, end_mem_addr;
+
+ start = ofs >> this->erase_shift;
+ start_mem_addr = onenand->mem_addr(start, 0, 0);
+ end = start + (len >> this->erase_shift) - 1;
+ end_mem_addr = onenand->mem_addr(end, 0, 0);
+
+ if (cmd == ONENAND_CMD_LOCK) {
+ s3c_write_cmd(ONENAND_LOCK_START, CMD_MAP_10(start_mem_addr));
+ s3c_write_cmd(ONENAND_LOCK_END, CMD_MAP_10(end_mem_addr));
+ } else {
+ s3c_write_cmd(ONENAND_UNLOCK_START, CMD_MAP_10(start_mem_addr));
+ s3c_write_cmd(ONENAND_UNLOCK_END, CMD_MAP_10(end_mem_addr));
+ }
+
+ this->wait(mtd, FL_LOCKING);
+}
+
+static void s3c_onenand_unlock_all(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ loff_t ofs = 0;
+ size_t len = this->chipsize;
+
+ /* FIXME workaround */
+ this->subpagesize = mtd->writesize;
+ mtd->subpage_sft = 0;
+
+ if (this->options & ONENAND_HAS_UNLOCK_ALL) {
+ /* Write unlock command */
+ this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
+
+ /* No need to check return value */
+ this->wait(mtd, FL_LOCKING);
+
+ /* Workaround for all block unlock in DDP */
+ if (!ONENAND_IS_DDP(this)) {
+ s3c_onenand_check_lock_status(mtd);
+ return;
+ }
+
+ /* All blocks on another chip */
+ ofs = this->chipsize >> 1;
+ len = this->chipsize >> 1;
+ }
+
+ s3c_onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+ s3c_onenand_check_lock_status(mtd);
+}
+
+#ifdef CONFIG_S3C64XX
+static void s3c_set_width_regs(struct onenand_chip *this)
+{
+ int dev_id, density;
+ int fba, fpa, fsa;
+ int dbs_dfs;
+
+ dev_id = DEVICE_ID0_REG;
+
+ density = (dev_id >> ONENAND_DEVICE_DENSITY_SHIFT) & 0xf;
+ dbs_dfs = !!(dev_id & ONENAND_DEVICE_IS_DDP);
+
+ fba = density + 7;
+ if (dbs_dfs)
+ fba--; /* Decrease the fba */
+ fpa = 6;
+ if (density >= ONENAND_DEVICE_DENSITY_512Mb)
+ fsa = 2;
+ else
+ fsa = 1;
+
+ DPRINTK("FBA %lu, FPA %lu, FSA %lu, DDP %lu",
+ FBA_WIDTH0_REG, FPA_WIDTH0_REG, FSA_WIDTH0_REG,
+ DDP_DEVICE_REG);
+
+ DPRINTK("mem_cfg0 0x%lx, sync mode %lu, "
+ "dev_page_size %lu, BURST LEN %lu",
+ MEM_CFG0_REG, SYNC_MODE_REG,
+ DEV_PAGE_SIZE_REG, BURST_LEN0_REG);
+
+ DEV_PAGE_SIZE_REG = 0x1;
+
+ FBA_WIDTH0_REG = fba;
+ FPA_WIDTH0_REG = fpa;
+ FSA_WIDTH0_REG = fsa;
+ DBS_DFS_WIDTH0_REG = dbs_dfs;
+}
+#endif
+
+void s3c_onenand_init(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ u32 size = (4 << 10); /* 4 KiB */
+
+ onenand = malloc(sizeof(struct s3c_onenand));
+ if (!onenand)
+ return;
+
+ onenand->page_buf = malloc(size * sizeof(char));
+ if (!onenand->page_buf)
+ return;
+ memset(onenand->page_buf, 0xff, size);
+
+ onenand->oob_buf = malloc(128 * sizeof(char));
+ if (!onenand->oob_buf)
+ return;
+ memset(onenand->oob_buf, 0xff, 128);
+
+ onenand->mtd = mtd;
+
+#if defined(CONFIG_S3C64XX)
+ onenand->base = (void *)0x70100000;
+ onenand->ahb_addr = (void *)0x20000000;
+#elif defined(CONFIG_S5PC1XX)
+ onenand->base = (void *)0xE7100000;
+ onenand->ahb_addr = (void *)0xB0000000;
+#endif
+ onenand->mem_addr = s3c_mem_addr;
+ onenand->reg = (struct samsung_onenand *)onenand->base;
+
+ this->read_word = s3c_onenand_readw;
+ this->write_word = s3c_onenand_writew;
+
+ this->wait = s3c_onenand_wait;
+ this->bbt_wait = s3c_onenand_bbt_wait;
+ this->unlock_all = s3c_onenand_unlock_all;
+ this->command = s3c_onenand_command;
+
+ this->read_bufferram = onenand_read_bufferram;
+ this->write_bufferram = onenand_write_bufferram;
+
+ this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
+}
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index b106ec9..df73478 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -249,6 +249,12 @@ int smc911x_initialize(u8 dev_num, int base_addr)
dev->iobase = base_addr;
+ /* Try to detect chip. Will fail if not present. */
+ if (smc911x_detect_chip(dev)) {
+ free(dev);
+ return 0;
+ }
+
addrh = smc911x_get_mac_csr(dev, ADDRH);
addrl = smc911x_get_mac_csr(dev, ADDRL);
dev->enetaddr[0] = addrl;
@@ -264,12 +270,6 @@ int smc911x_initialize(u8 dev_num, int base_addr)
dev->recv = smc911x_rx;
sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num);
- /* Try to detect chip. Will fail if not present. */
- if (smc911x_detect_chip(dev)) {
- free(dev);
- return 0;
- }
-
eth_register(dev);
return 0;
}
diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c
index e10db9a..1ce34e3 100644
--- a/drivers/rtc/s3c24x0_rtc.c
+++ b/drivers/rtc/s3c24x0_rtc.c
@@ -37,6 +37,7 @@
#endif
#include <rtc.h>
+#include <asm/io.h>
/*#define DEBUG*/
@@ -48,112 +49,113 @@ typedef enum {
static inline void SetRTC_Access(RTC_ACCESS a)
{
- S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+ struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
+
switch (a) {
- case RTC_ENABLE:
- rtc->RTCCON |= 0x01; break;
+ case RTC_ENABLE:
+ writeb(readb(&rtc->RTCCON) | 0x01, &rtc->RTCCON);
+ break;
- case RTC_DISABLE:
- rtc->RTCCON &= ~0x01; break;
+ case RTC_DISABLE:
+ writeb(readb(&rtc->RTCCON) & ~0x01, &rtc->RTCCON);
+ break;
}
}
/* ------------------------------------------------------------------------- */
-int rtc_get (struct rtc_time *tmp)
+int rtc_get(struct rtc_time *tmp)
{
- S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+ struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
uchar sec, min, hour, mday, wday, mon, year;
- uchar a_sec,a_min, a_hour, a_date, a_mon, a_year, a_armed;
+ uchar a_sec, a_min, a_hour, a_date, a_mon, a_year, a_armed;
/* enable access to RTC registers */
SetRTC_Access(RTC_ENABLE);
/* read RTC registers */
do {
- sec = rtc->BCDSEC;
- min = rtc->BCDMIN;
- hour = rtc->BCDHOUR;
- mday = rtc->BCDDATE;
- wday = rtc->BCDDAY;
- mon = rtc->BCDMON;
- year = rtc->BCDYEAR;
- } while (sec != rtc->BCDSEC);
+ sec = readb(&rtc->BCDSEC);
+ min = readb(&rtc->BCDMIN);
+ hour = readb(&rtc->BCDHOUR);
+ mday = readb(&rtc->BCDDATE);
+ wday = readb(&rtc->BCDDAY);
+ mon = readb(&rtc->BCDMON);
+ year = readb(&rtc->BCDYEAR);
+ } while (sec != readb(&rtc->BCDSEC));
/* read ALARM registers */
- a_sec = rtc->ALMSEC;
- a_min = rtc->ALMMIN;
- a_hour = rtc->ALMHOUR;
- a_date = rtc->ALMDATE;
- a_mon = rtc->ALMMON;
- a_year = rtc->ALMYEAR;
- a_armed = rtc->RTCALM;
+ a_sec = readb(&rtc->ALMSEC);
+ a_min = readb(&rtc->ALMMIN);
+ a_hour = readb(&rtc->ALMHOUR);
+ a_date = readb(&rtc->ALMDATE);
+ a_mon = readb(&rtc->ALMMON);
+ a_year = readb(&rtc->ALMYEAR);
+ a_armed = readb(&rtc->RTCALM);
/* disable access to RTC registers */
SetRTC_Access(RTC_DISABLE);
#ifdef RTC_DEBUG
- printf ( "Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
- "hr: %02x min: %02x sec: %02x\n",
- year, mon, mday, wday,
- hour, min, sec);
- printf ( "Alarms: %02x: year: %02x month: %02x date: %02x hour: %02x min: %02x sec: %02x\n",
- a_armed,
- a_year, a_mon, a_date,
- a_hour, a_min, a_sec);
+ printf("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
+ "hr: %02x min: %02x sec: %02x\n",
+ year, mon, mday, wday, hour, min, sec);
+ printf("Alarms: %02x: year: %02x month: %02x date: %02x hour: "
+ "%02x min: %02x sec: %02x\n",
+ a_armed, a_year, a_mon, a_date, a_hour, a_min, a_sec);
#endif
- tmp->tm_sec = bcd2bin(sec & 0x7F);
- tmp->tm_min = bcd2bin(min & 0x7F);
+ tmp->tm_sec = bcd2bin(sec & 0x7F);
+ tmp->tm_min = bcd2bin(min & 0x7F);
tmp->tm_hour = bcd2bin(hour & 0x3F);
tmp->tm_mday = bcd2bin(mday & 0x3F);
tmp->tm_mon = bcd2bin(mon & 0x1F);
tmp->tm_year = bcd2bin(year);
tmp->tm_wday = bcd2bin(wday & 0x07);
- if(tmp->tm_year<70)
- tmp->tm_year+=2000;
+ if (tmp->tm_year < 70)
+ tmp->tm_year += 2000;
else
- tmp->tm_year+=1900;
- tmp->tm_yday = 0;
- tmp->tm_isdst= 0;
+ tmp->tm_year += 1900;
+ tmp->tm_yday = 0;
+ tmp->tm_isdst = 0;
#ifdef RTC_DEBUG
- printf ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+ printf("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
#endif
return 0;
}
-int rtc_set (struct rtc_time *tmp)
+int rtc_set(struct rtc_time *tmp)
{
- S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+ struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
uchar sec, min, hour, mday, wday, mon, year;
#ifdef RTC_DEBUG
- printf ( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+ printf("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
#endif
- year = bin2bcd(tmp->tm_year % 100);
- mon = bin2bcd(tmp->tm_mon);
- wday = bin2bcd(tmp->tm_wday);
- mday = bin2bcd(tmp->tm_mday);
- hour = bin2bcd(tmp->tm_hour);
- min = bin2bcd(tmp->tm_min);
- sec = bin2bcd(tmp->tm_sec);
+ year = bin2bcd(tmp->tm_year % 100);
+ mon = bin2bcd(tmp->tm_mon);
+ wday = bin2bcd(tmp->tm_wday);
+ mday = bin2bcd(tmp->tm_mday);
+ hour = bin2bcd(tmp->tm_hour);
+ min = bin2bcd(tmp->tm_min);
+ sec = bin2bcd(tmp->tm_sec);
/* enable access to RTC registers */
SetRTC_Access(RTC_ENABLE);
/* write RTC registers */
- rtc->BCDSEC = sec;
- rtc->BCDMIN = min;
- rtc->BCDHOUR = hour;
- rtc->BCDDATE = mday;
- rtc->BCDDAY = wday;
- rtc->BCDMON = mon;
- rtc->BCDYEAR = year;
+ writeb(sec, &rtc->BCDSEC);
+ writeb(min, &rtc->BCDMIN);
+ writeb(hour, &rtc->BCDHOUR);
+ writeb(mday, &rtc->BCDDATE);
+ writeb(wday, &rtc->BCDDAY);
+ writeb(mon, &rtc->BCDMON);
+ writeb(year, &rtc->BCDYEAR);
/* disable access to RTC registers */
SetRTC_Access(RTC_DISABLE);
@@ -161,12 +163,12 @@ int rtc_set (struct rtc_time *tmp)
return 0;
}
-void rtc_reset (void)
+void rtc_reset(void)
{
- S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+ struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
- rtc->RTCCON = (rtc->RTCCON & ~0x06) | 0x08;
- rtc->RTCCON &= ~(0x08|0x01);
+ writeb((readb(&rtc->RTCCON) & ~0x06) | 0x08, &rtc->RTCCON);
+ writeb(readb(&rtc->RTCCON) & ~(0x08 | 0x01), &rtc->RTCCON);
}
#endif
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 64882a2..3c77a7c 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -33,6 +33,7 @@ COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
+COBJS-$(CONFIG_S5PC1XX) += serial_s5pc1xx.o
COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial.o
COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o
COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c
index 6d69c43..c2c72e4 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c24x0.c
@@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;
#elif defined(CONFIG_SERIAL3)
# if defined(CONFIG_TRAB)
-# #error "TRAB supports only CONFIG_SERIAL1"
+# error "TRAB supports only CONFIG_SERIAL1"
# endif
#define UART_NR S3C24X0_UART2
@@ -46,51 +46,71 @@ DECLARE_GLOBAL_DATA_PTR;
#error "Bad: you didn't configure serial ..."
#endif
+#include <asm/io.h>
+
#if defined(CONFIG_SERIAL_MULTI)
#include <serial.h>
/* Multi serial device functions */
#define DECLARE_S3C_SERIAL_FUNCTIONS(port) \
- int s3serial##port##_init (void) {\
- return serial_init_dev(port);}\
- void s3serial##port##_setbrg (void) {\
- serial_setbrg_dev(port);}\
- int s3serial##port##_getc (void) {\
- return serial_getc_dev(port);}\
- int s3serial##port##_tstc (void) {\
- return serial_tstc_dev(port);}\
- void s3serial##port##_putc (const char c) {\
- serial_putc_dev(port, c);}\
- void s3serial##port##_puts (const char *s) {\
- serial_puts_dev(port, s);}
-
-#define INIT_S3C_SERIAL_STRUCTURE(port,name,bus) {\
- name,\
- bus,\
- s3serial##port##_init,\
- s3serial##port##_setbrg,\
- s3serial##port##_getc,\
- s3serial##port##_tstc,\
- s3serial##port##_putc,\
- s3serial##port##_puts, }
+ int s3serial##port##_init(void) \
+ { \
+ return serial_init_dev(port); \
+ } \
+ void s3serial##port##_setbrg(void) \
+ { \
+ serial_setbrg_dev(port); \
+ } \
+ int s3serial##port##_getc(void) \
+ { \
+ return serial_getc_dev(port); \
+ } \
+ int s3serial##port##_tstc(void) \
+ { \
+ return serial_tstc_dev(port); \
+ } \
+ void s3serial##port##_putc(const char c) \
+ { \
+ serial_putc_dev(port, c); \
+ } \
+ void s3serial##port##_puts(const char *s) \
+ { \
+ serial_puts_dev(port, s); \
+ }
+
+#define INIT_S3C_SERIAL_STRUCTURE(port, name, bus) { \
+ name, \
+ bus, \
+ s3serial##port##_init, \
+ s3serial##port##_setbrg, \
+ s3serial##port##_getc, \
+ s3serial##port##_tstc, \
+ s3serial##port##_putc, \
+ s3serial##port##_puts, \
+}
#endif /* CONFIG_SERIAL_MULTI */
+#ifdef CONFIG_HWFLOW
+static int hwflow;
+#endif
+
void _serial_setbrg(const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+ struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
unsigned int reg = 0;
int i;
/* value is calculated so : (int)(PCLK/16./baudrate) -1 */
reg = get_PCLK() / (16 * gd->baudrate) - 1;
- uart->UBRDIV = reg;
- for (i = 0; i < 100; i++);
+ writel(reg, &uart->UBRDIV);
+ for (i = 0; i < 100; i++)
+ /* Delay */ ;
}
+
#if defined(CONFIG_SERIAL_MULTI)
-static inline void
-serial_setbrg_dev(unsigned int dev_index)
+static inline void serial_setbrg_dev(unsigned int dev_index)
{
_serial_setbrg(dev_index);
}
@@ -107,29 +127,33 @@ void serial_setbrg(void)
*/
static int serial_init_dev(const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+ struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
+
+#ifdef CONFIG_HWFLOW
+ hwflow = 0; /* turned off by default */
+#endif
/* FIFO enable, Tx/Rx FIFO clear */
- uart->UFCON = 0x07;
- uart->UMCON = 0x0;
+ writel(0x07, &uart->UFCON);
+ writel(0x0, &uart->UMCON);
/* Normal,No parity,1 stop,8 bit */
- uart->ULCON = 0x3;
+ writel(0x3, &uart->ULCON);
/*
* tx=level,rx=edge,disable timeout int.,enable rx error int.,
* normal,interrupt or polling
*/
- uart->UCON = 0x245;
+ writel(0x245, &uart->UCON);
#ifdef CONFIG_HWFLOW
- uart->UMCON = 0x1; /* RTS up */
+ writel(0x1, &uart->UMCON); /* RTS up */
#endif
/* FIXME: This is sooooooooooooooooooo ugly */
#if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2)
/* we need auto hw flow control on the gsm and gps port */
if (dev_index == 0 || dev_index == 1)
- uart->UMCON = 0x10;
+ writel(0x10, &uart->UMCON);
#endif
_serial_setbrg(dev_index);
@@ -140,7 +164,7 @@ static int serial_init_dev(const int dev_index)
/* Initialise the serial port. The settings are always 8 data bits, no parity,
* 1 stop bit, no start bits.
*/
-int serial_init (void)
+int serial_init(void)
{
return serial_init_dev(UART_NR);
}
@@ -151,40 +175,40 @@ int serial_init (void)
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
-int _serial_getc (const int dev_index)
+int _serial_getc(const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+ struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
- /* wait for character to arrive */
- while (!(uart->UTRSTAT & 0x1));
+ while (!(readl(&uart->UTRSTAT) & 0x1))
+ /* wait for character to arrive */ ;
- return uart->URXH & 0xff;
+ return readb(&uart->URXH) & 0xff;
}
+
#if defined(CONFIG_SERIAL_MULTI)
static inline int serial_getc_dev(unsigned int dev_index)
{
return _serial_getc(dev_index);
}
#else
-int serial_getc (void)
+int serial_getc(void)
{
return _serial_getc(UART_NR);
}
#endif
#ifdef CONFIG_HWFLOW
-static int hwflow = 0; /* turned off by default */
int hwflow_onoff(int on)
{
- switch(on) {
+ switch (on) {
case 0:
default:
- break; /* return current */
+ break; /* return current */
case 1:
- hwflow = 1; /* turn on */
+ hwflow = 1; /* turn on */
break;
case -1:
- hwflow = 0; /* turn off */
+ hwflow = 0; /* turn off */
break;
}
return hwflow;
@@ -208,29 +232,29 @@ void enable_putc(void)
/*
* Output a single byte to the serial port.
*/
-void _serial_putc (const char c, const int dev_index)
+void _serial_putc(const char c, const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+ struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
#ifdef CONFIG_MODEM_SUPPORT
if (be_quiet)
return;
#endif
- /* wait for room in the tx FIFO */
- while (!(uart->UTRSTAT & 0x2));
+ while (!(readl(&uart->UTRSTAT) & 0x2))
+ /* wait for room in the tx FIFO */ ;
#ifdef CONFIG_HWFLOW
- /* Wait for CTS up */
- while(hwflow && !(uart->UMSTAT & 0x1))
- ;
+ while (hwflow && !(readl(&uart->UMSTAT) & 0x1))
+ /* Wait for CTS up */ ;
#endif
- uart->UTXH = c;
+ writeb(c, &uart->UTXH);
/* If \n, also do \r */
if (c == '\n')
- serial_putc ('\r');
+ serial_putc('\r');
}
+
#if defined(CONFIG_SERIAL_MULTI)
static inline void serial_putc_dev(unsigned int dev_index, const char c)
{
@@ -249,13 +273,13 @@ void serial_putc(const char c)
*/
int _serial_tstc(const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+ struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
- return uart->UTRSTAT & 0x1;
+ return readl(&uart->UTRSTAT) & 0x1;
}
+
#if defined(CONFIG_SERIAL_MULTI)
-static inline int
-serial_tstc_dev(unsigned int dev_index)
+static inline int serial_tstc_dev(unsigned int dev_index)
{
return _serial_tstc(dev_index);
}
@@ -269,18 +293,17 @@ int serial_tstc(void)
void _serial_puts(const char *s, const int dev_index)
{
while (*s) {
- _serial_putc (*s++, dev_index);
+ _serial_putc(*s++, dev_index);
}
}
+
#if defined(CONFIG_SERIAL_MULTI)
-static inline void
-serial_puts_dev(int dev_index, const char *s)
+static inline void serial_puts_dev(int dev_index, const char *s)
{
_serial_puts(s, dev_index);
}
#else
-void
-serial_puts (const char *s)
+void serial_puts(const char *s)
{
_serial_puts(s, UART_NR);
}
@@ -289,12 +312,11 @@ serial_puts (const char *s)
#if defined(CONFIG_SERIAL_MULTI)
DECLARE_S3C_SERIAL_FUNCTIONS(0);
struct serial_device s3c24xx_serial0_device =
- INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0", "S3UART1");
+INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0", "S3UART1");
DECLARE_S3C_SERIAL_FUNCTIONS(1);
struct serial_device s3c24xx_serial1_device =
- INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1", "S3UART2");
+INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1", "S3UART2");
DECLARE_S3C_SERIAL_FUNCTIONS(2);
struct serial_device s3c24xx_serial2_device =
- INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2", "S3UART3");
-
+INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2", "S3UART3");
#endif /* CONFIG_SERIAL_MULTI */
diff --git a/drivers/serial/serial_s5pc1xx.c b/drivers/serial/serial_s5pc1xx.c
new file mode 100644
index 0000000..68c06a9
--- /dev/null
+++ b/drivers/serial/serial_s5pc1xx.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * based on drivers/serial/s3c64xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/clk.h>
+#include <serial.h>
+
+static inline struct s5pc1xx_uart *s5pc1xx_get_base_uart(int dev_index)
+{
+ u32 offset = dev_index * sizeof(struct s5pc1xx_uart);
+
+ if (cpu_is_s5pc100())
+ return (struct s5pc1xx_uart *)(S5PC100_UART_BASE + offset);
+ else
+ return (struct s5pc1xx_uart *)(S5PC110_UART_BASE + offset);
+}
+
+/*
+ * The coefficient, used to calculate the baudrate on S5PC1XX UARTs is
+ * calculated as
+ * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
+ * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
+ * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
+ */
+static const int udivslot[] = {
+ 0,
+ 0x0080,
+ 0x0808,
+ 0x0888,
+ 0x2222,
+ 0x4924,
+ 0x4a52,
+ 0x54aa,
+ 0x5555,
+ 0xd555,
+ 0xd5d5,
+ 0xddd5,
+ 0xdddd,
+ 0xdfdd,
+ 0xdfdf,
+ 0xffdf,
+};
+
+void serial_setbrg_dev(const int dev_index)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+ u32 pclk = get_pclk();
+ u32 baudrate = gd->baudrate;
+ u32 val;
+
+ val = pclk / baudrate;
+
+ writel(val / 16 - 1, &uart->ubrdiv);
+ writew(udivslot[val % 16], &uart->udivslot);
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+int serial_init_dev(const int dev_index)
+{
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ /* reset and enable FIFOs, set triggers to the maximum */
+ writel(0, &uart->ufcon);
+ writel(0, &uart->umcon);
+ /* 8N1 */
+ writel(0x3, &uart->ulcon);
+ /* No interrupts, no DMA, pure polling */
+ writel(0x245, &uart->ucon);
+
+ serial_setbrg_dev(dev_index);
+
+ return 0;
+}
+
+static int serial_err_check(const int dev_index)
+{
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ if (readl(&uart->uerstat) & 0xf)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc_dev(const int dev_index)
+{
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ /* wait for character to arrive */
+ while (!(readl(&uart->utrstat) & 0x1)) {
+ if (serial_err_check(dev_index))
+ return 0;
+ }
+
+ return (int)(readl(&uart->urxh) & 0xff);
+}
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc_dev(const char c, const int dev_index)
+{
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ /* wait for room in the tx FIFO */
+ while (!(readl(&uart->utrstat) & 0x2)) {
+ if (serial_err_check(dev_index))
+ return;
+ }
+
+ writel(c, &uart->utxh);
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc_dev(const int dev_index)
+{
+ struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ return (int)(readl(&uart->utrstat) & 0x1);
+}
+
+void serial_puts_dev(const char *s, const int dev_index)
+{
+ while (*s)
+ serial_putc_dev(*s++, dev_index);
+}
+
+/* Multi serial device functions */
+#define DECLARE_S5P_SERIAL_FUNCTIONS(port) \
+int s5p_serial##port##_init(void) { return serial_init_dev(port); } \
+void s5p_serial##port##_setbrg(void) { serial_setbrg_dev(port); } \
+int s5p_serial##port##_getc(void) { return serial_getc_dev(port); } \
+int s5p_serial##port##_tstc(void) { return serial_tstc_dev(port); } \
+void s5p_serial##port##_putc(const char c) { serial_putc_dev(c, port); } \
+void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); }
+
+#define INIT_S5P_SERIAL_STRUCTURE(port, name, bus) { \
+ name, \
+ bus, \
+ s5p_serial##port##_init, \
+ s5p_serial##port##_setbrg, \
+ s5p_serial##port##_getc, \
+ s5p_serial##port##_tstc, \
+ s5p_serial##port##_putc, \
+ s5p_serial##port##_puts, }
+
+DECLARE_S5P_SERIAL_FUNCTIONS(0);
+struct serial_device s5pc1xx_serial0_device =
+ INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0", "S5PUART0");
+DECLARE_S5P_SERIAL_FUNCTIONS(1);
+struct serial_device s5pc1xx_serial1_device =
+ INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1", "S5PUART1");
+DECLARE_S5P_SERIAL_FUNCTIONS(2);
+struct serial_device s5pc1xx_serial2_device =
+ INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2", "S5PUART2");
+DECLARE_S5P_SERIAL_FUNCTIONS(3);
+struct serial_device s5pc1xx_serial3_device =
+ INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3", "S5PUART3");