Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

12 files changed, 250 insertions, 10 deletions

diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 49e5cb9..bedf833 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -32,6 +32,9 @@ COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
 COBJS-$(CONFIG_DWMMC) += dw_mmc.o
 COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
 COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
+ifdef CONFIG_SPL_BUILD
+COBJS-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
+endif
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c
new file mode 100644
index 0000000..65c52a2
--- /dev/null
+++ b/drivers/mmc/fsl_esdhc_spl.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <malloc.h>
+
+/*
+ * The environment variables are written to just after the u-boot image
+ * on SDCard, so we must read the MBR to get the start address and code
+ * length of the u-boot image, then calculate the address of the env.
+ */
+#define ESDHC_BOOT_IMAGE_SIZE	0x48
+#define ESDHC_BOOT_IMAGE_ADDR	0x50
+#define MBRDBR_BOOT_SIG_55	0x1fe
+#define MBRDBR_BOOT_SIG_AA	0x1ff
+#define CONFIG_CFG_DATA_SECTOR	0
+
+/*
+ * The main entry for mmc booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from mmc into SDRAM and starts it from there.
+ */
+
+void __noreturn mmc_boot(void)
+{
+	__attribute__((noreturn)) void (*uboot)(void);
+	uint blk_start, blk_cnt, err;
+	u32 blklen;
+	uchar *tmp_buf;
+	uchar val;
+	uint i, byte_num;
+	u32 offset, code_len;
+	struct mmc *mmc;
+
+	mmc = find_mmc_device(0);
+	if (!mmc) {
+		puts("spl: mmc device not found!!\n");
+		hang();
+	}
+
+	blklen = mmc->read_bl_len;
+	tmp_buf = malloc(blklen);
+	if (!tmp_buf) {
+		puts("spl: malloc memory failed!!\n");
+		hang();
+	}
+	memset(tmp_buf, 0, blklen);
+
+	/*
+	* Read source addr from sd card
+	*/
+	err = mmc->block_dev.block_read(0, CONFIG_CFG_DATA_SECTOR, 1, tmp_buf);
+	if (err != 1) {
+		puts("spl: mmc read failed!!\n");
+		free(tmp_buf);
+		hang();
+	}
+
+	val = *(tmp_buf + MBRDBR_BOOT_SIG_55);
+	if (0x55 != val) {
+		puts("spl: mmc signature is not valid!!\n");
+		free(tmp_buf);
+		hang();
+	}
+	val = *(tmp_buf + MBRDBR_BOOT_SIG_AA);
+	if (0xAA != val) {
+		puts("spl: mmc signature is not valid!!\n");
+		free(tmp_buf);
+		hang();
+	}
+
+	byte_num = 4;
+	offset = 0;
+	for (i = 0; i < byte_num; i++) {
+		val = *(tmp_buf + ESDHC_BOOT_IMAGE_ADDR + i);
+		offset = (offset << 8) + val;
+	}
+	offset += CONFIG_SYS_MMC_U_BOOT_OFFS;
+	/* Get the code size from offset 0x48 */
+	byte_num = 4;
+	code_len = 0;
+	for (i = 0; i < byte_num; i++) {
+		val = *(tmp_buf + ESDHC_BOOT_IMAGE_SIZE + i);
+		code_len = (code_len << 8) + val;
+	}
+	code_len -= CONFIG_SYS_MMC_U_BOOT_OFFS;
+	/*
+	* Load U-Boot image from mmc into RAM
+	*/
+	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
+	blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len;
+	err = mmc->block_dev.block_read(0, blk_start, blk_cnt,
+					(uchar *)CONFIG_SYS_MMC_U_BOOT_DST);
+	if (err != blk_cnt) {
+		puts("spl: mmc read failed!!\n");
+		free(tmp_buf);
+		hang();
+	}
+
+	/*
+	* Clean d-cache and invalidate i-cache, to
+	* make sure that no stale data is executed.
+	*/
+	flush_cache(CONFIG_SYS_MMC_U_BOOT_DST, CONFIG_SYS_MMC_U_BOOT_SIZE);
+
+	/*
+	* Jump to U-Boot image
+	*/
+	uboot = (void *)CONFIG_SYS_MMC_U_BOOT_START;
+	(*uboot)();
+}
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 4da8db9..5502675 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1483,7 +1483,9 @@ int mmc_initialize(bd_t *bis)
 	if (board_mmc_init(bis) < 0)
 		cpu_mmc_init(bis);
 
+#ifndef CONFIG_SPL_BUILD
 	print_mmc_devices(',');
+#endif
 
 	do_preinit();
 	return 0;
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index e27e0b7..366dee6 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -23,6 +23,7 @@ COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
 COBJS-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
 COBJS-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
 COBJS-$(CONFIG_SPL_NAND_BASE) += nand_base.o
+COBJS-$(CONFIG_SPL_NAND_INIT) += nand.o
 
 else # not spl
 
diff --git a/drivers/mtd/nand/fsl_elbc_spl.c b/drivers/mtd/nand/fsl_elbc_spl.c
index 7e5599a..a7476b4 100644
--- a/drivers/mtd/nand/fsl_elbc_spl.c
+++ b/drivers/mtd/nand/fsl_elbc_spl.c
@@ -34,7 +34,11 @@ static void nand_wait(void)
 	}
 }
 
+#ifdef CONFIG_TPL_BUILD
+int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
+#else
 static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
+#endif
 {
 	fsl_lbc_t *regs = LBC_BASE_ADDR;
 	uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
@@ -114,6 +118,15 @@ static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
 }
 
 /*
+ * Defines a static function nand_load_image() here, because non-static makes
+ * the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes)
+ */
+#ifndef CONFIG_TPL_BUILD
+#define nand_spl_load_image(offs, uboot_size, vdst) \
+	nand_load_image(offs, uboot_size, vdst)
+#endif
+
+/*
  * The main entry for NAND booting. It's necessary that SDRAM is already
  * configured and available since this code loads the main U-Boot image
  * from NAND into SDRAM and starts it from there.
@@ -124,17 +137,17 @@ void nand_boot(void)
 	/*
 	 * Load U-Boot image from NAND into RAM
 	 */
-	nand_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
-			CONFIG_SYS_NAND_U_BOOT_SIZE,
-			(void *)CONFIG_SYS_NAND_U_BOOT_DST);
+	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+			    CONFIG_SYS_NAND_U_BOOT_SIZE,
+			    (void *)CONFIG_SYS_NAND_U_BOOT_DST);
 
 #ifdef CONFIG_NAND_ENV_DST
-	nand_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			(void *)CONFIG_NAND_ENV_DST);
+	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+			    (void *)CONFIG_NAND_ENV_DST);
 
 #ifdef CONFIG_ENV_OFFSET_REDUND
-	nand_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
-			(void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
+	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
+			    (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
 #endif
 #endif
 
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index e537fcf..191138a 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -11,6 +11,7 @@ LIB	:= $(obj)libspi_flash.o
 
 ifdef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_SPL_SPI_LOAD)	+= spi_spl_load.o
+COBJS-$(CONFIG_SPL_SPI_BOOT)	+= fsl_espi_spl.o
 endif
 
 COBJS-$(CONFIG_SPI_FLASH)	+= spi_flash.o
diff --git a/drivers/mtd/spi/fsl_espi_spl.c b/drivers/mtd/spi/fsl_espi_spl.c
new file mode 100644
index 0000000..6263d8c
--- /dev/null
+++ b/drivers/mtd/spi/fsl_espi_spl.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi_flash.h>
+#include <malloc.h>
+
+#define ESPI_BOOT_IMAGE_SIZE	0x48
+#define ESPI_BOOT_IMAGE_ADDR	0x50
+#define CONFIG_CFG_DATA_SECTOR	0
+
+/*
+ * The main entry for SPI booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from SPI into SDRAM and starts it from there.
+ */
+void spi_boot(void)
+{
+	void (*uboot)(void) __noreturn;
+	u32 offset, code_len;
+	unsigned char *buf = NULL;
+	struct spi_flash *flash;
+
+	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	if (flash == NULL) {
+		puts("\nspi_flash_probe failed");
+		hang();
+	}
+
+	/*
+	* Load U-Boot image from SPI flash into RAM
+	*/
+	buf = malloc(flash->page_size);
+	if (buf == NULL) {
+		puts("\nmalloc failed");
+		hang();
+	}
+	memset(buf, 0, flash->page_size);
+
+	spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR,
+		       flash->page_size, (void *)buf);
+	offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR);
+	/* Skip spl code */
+	offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
+	/* Get the code size from offset 0x48 */
+	code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE);
+	/* Skip spl code */
+	code_len = code_len - CONFIG_SPL_MAX_SIZE;
+	/* copy code to DDR */
+	spi_flash_read(flash, offset, code_len,
+		       (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_DST);
+	/*
+	* Jump to U-Boot image
+	*/
+	flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len);
+	uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START;
+	(*uboot)();
+}
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 9814395..5d5055f 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -555,12 +555,14 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 		goto err_manufacturer_probe;
 	}
 #endif
+#ifndef CONFIG_SPL_BUILD
 	printf("SF: Detected %s with page size ", flash->name);
 	print_size(flash->sector_size, ", total ");
 	print_size(flash->size, "");
 	if (flash->memory_map)
 		printf(", mapped at %p", flash->memory_map);
 	puts("\n");
+#endif
 #ifndef CONFIG_SPI_FLASH_BAR
 	if (flash->size > SPI_FLASH_16MB_BOUN) {
 		puts("SF: Warning - Only lower 16MiB accessible,");
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 422c2c6..cb099cd 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -341,7 +341,9 @@ static int fm_eth_startup(struct fm_eth *fm_eth)
 	mac->init_mac(mac);
 
 	/* For some reason we need to set SPEED_100 */
-	if ((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) && mac->set_if_mode)
+	if (((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) ||
+	     (fm_eth->enet_if == PHY_INTERFACE_MODE_QSGMII)) &&
+	      mac->set_if_mode)
 		mac->set_if_mode(mac, fm_eth->enet_if, SPEED_100);
 
 	/* init bmi rx port, IM mode and disable */
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 144e109..592a67f 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -90,6 +90,7 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac,
 		if_mode |= (IF_MODE_GMII | IF_MODE_RM);
 		break;
 	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
 		if_mode &= ~IF_MODE_MASK;
 		if_mode |= (IF_MODE_GMII);
 		break;
diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c
index 10c141f..6253f22 100644
--- a/drivers/net/fm/t4240.c
+++ b/drivers/net/fm/t4240.c
@@ -114,7 +114,45 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 			return PHY_INTERFACE_MODE_SGMII;
 		break;
 	default:
-		return PHY_INTERFACE_MODE_NONE;
+		break;
+	}
+
+	/* handle QSGMII */
+	switch (port) {
+	case FM1_DTSEC1:
+	case FM1_DTSEC2:
+	case FM1_DTSEC3:
+	case FM1_DTSEC4:
+		/* check lane G on SerDes1 */
+		if (is_serdes_configured(QSGMII_FM1_A))
+			return PHY_INTERFACE_MODE_QSGMII;
+		break;
+	case FM1_DTSEC5:
+	case FM1_DTSEC6:
+	case FM1_DTSEC9:
+	case FM1_DTSEC10:
+		/* check lane C on SerDes1 */
+		if (is_serdes_configured(QSGMII_FM1_B))
+			return PHY_INTERFACE_MODE_QSGMII;
+		break;
+	case FM2_DTSEC1:
+	case FM2_DTSEC2:
+	case FM2_DTSEC3:
+	case FM2_DTSEC4:
+		/* check lane G on SerDes2 */
+		if (is_serdes_configured(QSGMII_FM2_A))
+			return PHY_INTERFACE_MODE_QSGMII;
+		break;
+	case FM2_DTSEC5:
+	case FM2_DTSEC6:
+	case FM2_DTSEC9:
+	case FM2_DTSEC10:
+		/* check lane C on SerDes2 */
+		if (is_serdes_configured(QSGMII_FM2_B))
+			return PHY_INTERFACE_MODE_QSGMII;
+		break;
+	default:
+		break;
 	}
 
 	return PHY_INTERFACE_MODE_NONE;
diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
index c883d3c..7c84582 100644
--- a/drivers/spi/fsl_espi.c
+++ b/drivers/spi/fsl_espi.c
@@ -75,7 +75,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 
 	/* Set eSPI BRG clock source */
 	get_sys_info(&sysinfo);
-	spibrg = sysinfo.freqSystemBus / 2;
+	spibrg = sysinfo.freq_systembus / 2;
 	fsl->div16 = 0;
 	if ((spibrg / max_hz) > 32) {
 		fsl->div16 = ESPI_CSMODE_DIV16;