diff options
| author | Ye.Li <B37916@freescale.com> | 2014-02-17 16:38:36 +0800 |
|---|---|---|
| committer | Nitin Garg <nitin.garg@freescale.com> | 2014-06-13 10:17:02 -0500 |
| commit | 0b02843b18d3a2c5c8012c4248a5574a8f6998c7 (patch) | |
| tree | 58d88f6a7910b3aa984a04413371ef192a997920 /drivers | |
| parent | 2ead2f9501c6d2571e0f5365bd808ed7c73257ef (diff) | |
| download | u-boot-imx-0b02843b18d3a2c5c8012c4248a5574a8f6998c7.zip u-boot-imx-0b02843b18d3a2c5c8012c4248a5574a8f6998c7.tar.gz u-boot-imx-0b02843b18d3a2c5c8012c4248a5574a8f6998c7.tar.bz2 | |
ENGR00315499-20 ARM:imx6 Fix USDHC driver bug in PIO mode
When configure the USDHC driver to PIO mode by defining
"CONFIG_SYS_FSL_ESDHC_USE_PIO", the SD/MMC read and write will fail.
Two bugs in the driver to cause the issue:
1. The read buffer was invalidated after reading from DATAPORT register,
which should be only applied to DMA mode. The valid data in cache was
overwritten by physical memory.
2. The watermarks are not set in PIO mode, will cause according state not
be set.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit e2ced39867a3001390bd23069e56b513ed268bb0)
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mmc/fsl_esdhc.c | 25 |
1 files changed, 10 insertions, 15 deletions
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 1f834d7..6ca61c7 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -1,5 +1,5 @@ /* - * Copyright 2007, 2010-2013 Freescale Semiconductor, Inc. + * Copyright 2007, 2010-2014 Freescale Semiconductor, Inc. * Andy Fleming * * Based vaguely on the pxa mmc code: @@ -184,7 +184,7 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) int timeout; struct fsl_esdhc_cfg *cfg = mmc->priv; struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; -#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO + uint wml_value; wml_value = data->blocksize/4; @@ -194,12 +194,15 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) wml_value = WML_RD_WML_MAX_VAL; esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value); +#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO esdhc_write32(®s->dsaddr, (u32)data->dest); +#endif } else { +#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO flush_dcache_range((ulong)data->src, (ulong)data->src+data->blocks *data->blocksize); - +#endif if (wml_value > WML_WR_WML_MAX) wml_value = WML_WR_WML_MAX_VAL; if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) { @@ -209,19 +212,10 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK, wml_value << 16); +#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO esdhc_write32(®s->dsaddr, (u32)data->src); +#endif } -#else /* CONFIG_SYS_FSL_ESDHC_USE_PIO */ - if (!(data->flags & MMC_DATA_READ)) { - if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) { - printf("\nThe SD card is locked. " - "Can not write to a locked card.\n\n"); - return TIMEOUT; - } - esdhc_write32(®s->dsaddr, (u32)data->src); - } else - esdhc_write32(®s->dsaddr, (u32)data->dest); -#endif /* CONFIG_SYS_FSL_ESDHC_USE_PIO */ esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize); @@ -398,9 +392,10 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) goto out; } } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE); -#endif + if (data->flags & MMC_DATA_READ) check_and_invalidate_dcache_range(cmd, data); +#endif } out: |