ftsdc010: add support of ftsdc010 mmc controller

Faraday FTSDC010 controller is a SD/MMC controller for SoC chip.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

2 files changed, 668 insertions, 0 deletions

diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index e5ca121..6e94860 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -29,6 +29,7 @@ COBJS-$(CONFIG_ATMEL_MCI) += atmel_mci.o
 COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
 COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
 COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
+COBJS-$(CONFIG_FTSDC010) += ftsdc010_esdhc.o
 COBJS-$(CONFIG_GENERIC_MMC) += mmc.o
 COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
 COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o
diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c
new file mode 100644
index 0000000..e38dd87
--- /dev/null
+++ b/drivers/mmc/ftsdc010_esdhc.c
@@ -0,0 +1,667 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <mmc.h>
+
+#include <asm/io.h>
+#include <faraday/ftsdc010.h>
+
+/*
+ * supported mmc hosts
+ * setting the number CONFIG_FTSDC010_NUMBER in your configuration file.
+ */
+static struct mmc ftsdc010_dev[CONFIG_FTSDC010_NUMBER];
+static struct mmc_host ftsdc010_host[CONFIG_FTSDC010_NUMBER];
+
+static struct ftsdc010_mmc *ftsdc010_get_base_mmc(int dev_index)
+{
+	return (struct ftsdc010_mmc *)CONFIG_FTSDC010_BASE + dev_index;
+}
+
+#ifdef DEBUG
+static void ftsdc010_dump_reg(struct mmc_host *host)
+{
+	debug("cmd: %08x\n",		readl(&host->reg->cmd));
+	debug("argu: %08x\n",		readl(&host->reg->argu));
+	debug("rsp0: %08x\n",		readl(&host->reg->rsp0));
+	debug("rsp1: %08x\n",		readl(&host->reg->rsp1));
+	debug("rsp2: %08x\n",		readl(&host->reg->rsp2));
+	debug("rsp3: %08x\n",		readl(&host->reg->rsp3));
+	debug("rsp_cmd: %08x\n",	readl(&host->reg->rsp_cmd));
+	debug("dcr: %08x\n",		readl(&host->reg->dcr));
+	debug("dtr: %08x\n",		readl(&host->reg->dtr));
+	debug("dlr: %08x\n",		readl(&host->reg->dlr));
+	debug("status: %08x\n",		readl(&host->reg->status));
+	debug("clr: %08x\n",		readl(&host->reg->clr));
+	debug("int_mask: %08x\n",	readl(&host->reg->int_mask));
+	debug("pcr: %08x\n",		readl(&host->reg->pcr));
+	debug("ccr: %08x\n",		readl(&host->reg->ccr));
+	debug("bwr: %08x\n",		readl(&host->reg->bwr));
+	debug("dwr: %08x\n",		readl(&host->reg->dwr));
+	debug("feature: %08x\n",	readl(&host->reg->feature));
+	debug("rev: %08x\n",		readl(&host->reg->rev));
+}
+#endif
+
+static unsigned int enable_imask(struct ftsdc010_mmc *reg, unsigned int imask)
+{
+	unsigned int newmask;
+
+	newmask = readl(&reg->int_mask);
+	newmask |= imask;
+
+	writel(newmask, &reg->int_mask);
+
+	return newmask;
+}
+
+static void ftsdc010_pio_read(struct mmc_host *host, char *buf, unsigned int size)
+{
+	unsigned int fifo;
+	unsigned int fifo_words;
+	unsigned int *ptr;
+	unsigned int status;
+	unsigned int retry = 0;
+
+	/* get_data_buffer */
+	ptr = (unsigned int *)buf;
+
+	while (size) {
+		status = readl(&host->reg->status);
+
+		if (status & FTSDC010_STATUS_FIFO_ORUN) {
+			fifo = host->fifo_len > size ?
+				size : host->fifo_len;
+
+			size -= fifo;
+
+			fifo_words = fifo >> 2;
+
+			while (fifo_words--)
+				*ptr++ = readl(&host->reg->dwr);
+
+			/*
+			 * for adding some delays for SD card to put
+			 * data into FIFO again
+			 */
+			udelay(4*FTSDC010_DELAY_UNIT);
+
+#ifdef CONFIG_FTSDC010_SDIO
+			/* sdio allow non-power-of-2 blksz */
+			if (fifo & 3) {
+				unsigned int n = fifo & 3;
+				unsigned int data = readl(&host->reg->dwr);
+
+				unsigned char *p = (unsigned char *)ptr;
+
+				while (n--) {
+					*p++ = data;
+					data >>= 8;
+				}
+			}
+#endif
+		} else {
+			udelay(1);
+			if (++retry >= FTSDC010_PIO_RETRY) {
+				debug("%s: PIO_RETRY timeout\n", __func__);
+				return;
+			}
+		}
+	}
+}
+
+static void ftsdc010_pio_write(struct mmc_host *host, const char *buf,
+			unsigned int size)
+{
+	unsigned int fifo;
+	unsigned int *ptr;
+	unsigned int status;
+	unsigned int retry = 0;
+
+	/* get data buffer */
+	ptr = (unsigned int *)buf;
+
+	while (size) {
+		status = readl(&host->reg->status);
+
+		if (status & FTSDC010_STATUS_FIFO_ORUN) {
+			fifo = host->fifo_len > size ?
+				size : host->fifo_len;
+
+			size -= fifo;
+
+			fifo = (fifo + 3) >> 2;
+
+			while (fifo--) {
+				writel(*ptr, &host->reg->dwr);
+				ptr++;
+			}
+
+		} else {
+			udelay(1);
+			if (++retry >= FTSDC010_PIO_RETRY) {
+				debug("%s: PIO_RETRY timeout\n", __func__);
+				return;
+			}
+		}
+	}
+}
+
+static int ftsdc010_pio_check_status(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
+{
+	struct mmc_host *host = mmc->priv;
+
+	unsigned int sta, clear;
+	unsigned int i;
+
+	/* check response and hardware status */
+	clear = 0;
+
+	/* chech CMD_SEND */
+	for (i = 0; i < FTSDC010_CMD_RETRY; i++) {
+		sta = readl(&host->reg->status);
+		/* Command Complete */
+		if (sta & FTSDC010_STATUS_CMD_SEND) {
+			if (!data)
+				clear |= FTSDC010_CLR_CMD_SEND;
+			break;
+		}
+	}
+
+	if (i > FTSDC010_CMD_RETRY) {
+		printf("%s: send command timeout\n", __func__);
+		return TIMEOUT;
+	}
+
+	/* debug: print status register and command index*/
+	debug("sta: %08x cmd %d\n", sta, cmd->cmdidx);
+
+	/* handle data FIFO */
+	if ((sta & FTSDC010_STATUS_FIFO_ORUN) ||
+		(sta & FTSDC010_STATUS_FIFO_URUN)) {
+
+		/* Wrong DATA FIFO Flag */
+		if (data == NULL)
+			printf("%s, data fifo wrong: sta: %08x cmd %d\n",
+				__func__, sta, cmd->cmdidx);
+
+		if (sta & FTSDC010_STATUS_FIFO_ORUN)
+			clear |= FTSDC010_STATUS_FIFO_ORUN;
+		if (sta & FTSDC010_STATUS_FIFO_URUN)
+			clear |= FTSDC010_STATUS_FIFO_URUN;
+	}
+
+	/* check RSP TIMEOUT or FAIL */
+	if (sta & FTSDC010_STATUS_RSP_TIMEOUT) {
+		/* RSP TIMEOUT */
+		debug("%s: RSP timeout: sta: %08x cmd %d\n",
+				__func__, sta, cmd->cmdidx);
+
+		clear |= FTSDC010_CLR_RSP_TIMEOUT;
+		writel(clear, &host->reg->clr);
+
+		return TIMEOUT;
+	} else if (sta & FTSDC010_STATUS_RSP_CRC_FAIL) {
+		/* clear response fail bit */
+		debug("%s: RSP CRC FAIL: sta: %08x cmd %d\n",
+				__func__, sta, cmd->cmdidx);
+
+		clear |= FTSDC010_CLR_RSP_CRC_FAIL;
+		writel(clear, &host->reg->clr);
+
+		return 0;
+	} else if (sta & FTSDC010_STATUS_RSP_CRC_OK) {
+
+		/* clear response CRC OK bit */
+		clear |= FTSDC010_CLR_RSP_CRC_OK;
+	}
+
+	/* check DATA TIMEOUT or FAIL */
+	if (data) {
+		if (sta & FTSDC010_STATUS_DATA_TIMEOUT) {
+			/* DATA TIMEOUT */
+			debug("%s: DATA TIMEOUT: sta: %08x\n",
+					__func__, sta);
+
+			clear |= FTSDC010_STATUS_DATA_TIMEOUT;
+			writel(sta, &host->reg->clr);
+			return TIMEOUT;
+		} else if (sta & FTSDC010_STATUS_DATA_CRC_FAIL) {
+			/* Error Interrupt */
+			debug("%s: DATA CRC FAIL: sta: %08x\n",
+					__func__, sta);
+
+			clear |= FTSDC010_STATUS_DATA_CRC_FAIL;
+			writel(clear, &host->reg->clr);
+
+			return 0;
+		} else if (sta & FTSDC010_STATUS_DATA_END) {
+			/* Transfer Complete */
+			clear |= FTSDC010_STATUS_DATA_END;
+		}
+	}
+
+	/* transaction is success and clear status register */
+	writel(clear, &host->reg->clr);
+
+	return 0;
+}
+
+static int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
+{
+	struct mmc_host *host = mmc->priv;
+
+#ifdef CONFIG_FTSDC010_SDIO
+	unsigned int scon;
+#endif
+	unsigned int ccon;
+	unsigned int mask, tmpmask;
+	unsigned int ret;
+
+	if (data)
+		mask = FTSDC010_INT_MASK_RSP_TIMEOUT;
+	else if (cmd->resp_type & MMC_RSP_PRESENT)
+		mask = FTSDC010_INT_MASK_RSP_TIMEOUT;
+	else
+		mask = FTSDC010_INT_MASK_CMD_SEND;
+
+	/* write argu reg */
+	debug("%s: cmd->arg: %08x\n", __func__, cmd->cmdarg);
+	writel(cmd->cmdarg, &host->reg->argu);
+
+	/* setup cmd reg */
+	debug("cmd: %d\n", cmd->cmdidx);
+	debug("resp: %08x\n", cmd->resp_type);
+
+	/* setup commnad */
+	ccon = FTSDC010_CMD_IDX(cmd->cmdidx);
+
+	/* setup command flags */
+	ccon |= FTSDC010_CMD_CMD_EN;
+
+	/*
+	 * This hardware didn't support specific commands for mapping
+	 * MMC_RSP_BUSY and MMC_RSP_OPCODE. Hence we don't deal with it.
+	 */
+	if (cmd->resp_type & MMC_RSP_PRESENT) {
+		ccon |= FTSDC010_CMD_NEED_RSP;
+		mask |= FTSDC010_INT_MASK_RSP_CRC_OK |
+			FTSDC010_INT_MASK_RSP_CRC_FAIL;
+	}
+
+	if (cmd->resp_type & MMC_RSP_136)
+		ccon |= FTSDC010_CMD_LONG_RSP;
+
+	/* In Linux driver, MMC_CMD_APP_CMD is checked in last_opcode */
+	if (host->last_opcode == MMC_CMD_APP_CMD)
+		ccon |= FTSDC010_CMD_APP_CMD;
+
+#ifdef CONFIG_FTSDC010_SDIO
+	scon = readl(&host->reg->sdio_ctrl1);
+	if (host->card_type == MMC_TYPE_SDIO)
+		scon |= FTSDC010_SDIO_CTRL1_SDIO_ENABLE;
+	else
+		scon &= ~FTSDC010_SDIO_CTRL1_SDIO_ENABLE;
+	writel(scon, &host->reg->sdio_ctrl1);
+#endif
+
+	/* record last opcode for specifing the command type to hardware */
+	host->last_opcode = cmd->cmdidx;
+
+	/* write int_mask reg */
+	tmpmask = readl(&host->reg->int_mask);
+	tmpmask |= mask;
+	writel(tmpmask, &host->reg->int_mask);
+
+	/* write cmd reg */
+	debug("%s: ccon: %08x\n", __func__, ccon);
+	writel(ccon, &host->reg->cmd);
+	udelay(4*FTSDC010_DELAY_UNIT);
+
+	/* read/write data */
+	if (data && (data->flags & MMC_DATA_READ)) {
+		ftsdc010_pio_read(host, data->dest,
+				data->blocksize * data->blocks);
+	} else if (data && (data->flags & MMC_DATA_WRITE)) {
+		ftsdc010_pio_write(host, data->src,
+				data->blocksize * data->blocks);
+	}
+
+	/* pio check response status */
+	ret = ftsdc010_pio_check_status(mmc, cmd, data);
+	if (!ret) {
+		/* if it is long response */
+		if (ccon & FTSDC010_CMD_LONG_RSP) {
+			cmd->response[0] = readl(&host->reg->rsp3);
+			cmd->response[1] = readl(&host->reg->rsp2);
+			cmd->response[2] = readl(&host->reg->rsp1);
+			cmd->response[3] = readl(&host->reg->rsp0);
+
+		} else {
+			cmd->response[0] = readl(&host->reg->rsp0);
+		}
+	}
+
+	udelay(FTSDC010_DELAY_UNIT);
+	return ret;
+}
+
+static unsigned int cal_blksz(unsigned int blksz)
+{
+	unsigned int blksztwo = 0;
+
+	while (blksz >>= 1)
+		blksztwo++;
+
+	return blksztwo;
+}
+
+static int ftsdc010_setup_data(struct mmc *mmc, struct mmc_data *data)
+{
+	struct mmc_host *host = mmc->priv;
+	unsigned int dcon, newmask;
+
+	/* configure data transfer paramter */
+	if (!data)
+		return 0;
+
+	if (((data->blocksize - 1) & data->blocksize) != 0) {
+		printf("%s: can't do non-power-of 2 sized block transfers"
+			" (blksz %d)\n", __func__, data->blocksize);
+		return -1;
+	}
+
+	/*
+	 * We cannot deal with unaligned blocks with more than
+	 * one block being transfered.
+	 */
+	if ((data->blocksize <= 2) && (data->blocks > 1)) {
+			printf("%s: can't do non-word sized block transfers"
+				" (blksz %d)\n", __func__, data->blocksize);
+			return -1;
+	}
+
+	/* data length */
+	dcon = data->blocksize * data->blocks;
+	writel(dcon, &host->reg->dlr);
+
+	/* write data control */
+	dcon = cal_blksz(data->blocksize);
+
+	/* add to IMASK register */
+	newmask = (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT);
+
+	/*
+	 * enable UNDERRUN will trigger interrupt immediatedly
+	 * So setup it when rsp is received successfully
+	 */
+	if (data->flags & MMC_DATA_WRITE) {
+		dcon |= FTSDC010_DCR_DATA_WRITE;
+	} else {
+		dcon &= ~FTSDC010_DCR_DATA_WRITE;
+		newmask |= FTSDC010_STATUS_FIFO_ORUN;
+	}
+	enable_imask(host->reg, newmask);
+
+#ifdef CONFIG_FTSDC010_SDIO
+	/* always reset fifo since last transfer may fail */
+	dcon |= FTSDC010_DCR_FIFO_RST;
+
+	/* handle sdio */
+	dcon = data->blocksize | data->blocks << 15;
+	if (data->blocks > 1)
+		dcon |= FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE;
+#endif
+
+	/* enable data transfer which will be pended until cmd is send */
+	dcon |= FTSDC010_DCR_DATA_EN;
+	writel(dcon, &host->reg->dcr);
+
+	return 0;
+}
+
+static int ftsdc010_send_request(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
+{
+	int ret;
+
+	if (data) {
+		ret = ftsdc010_setup_data(mmc, data);
+
+		if (ret) {
+			printf("%s: setup data error\n", __func__);
+			return -1;
+		}
+
+		if ((data->flags & MMC_DATA_BOTH_DIR) == MMC_DATA_BOTH_DIR) {
+			printf("%s: data is both direction\n", __func__);
+			return -1;
+		}
+	}
+
+	/* Send command */
+	ret = ftsdc010_send_cmd(mmc, cmd, data);
+	return ret;
+}
+
+static int ftsdc010_card_detect(struct mmc *mmc)
+{
+	struct mmc_host *host = mmc->priv;
+	unsigned int sta;
+
+	sta = readl(&host->reg->status);
+	debug("%s: card status: %08x\n", __func__, sta);
+
+	return (sta & FTSDC010_STATUS_CARD_DETECT) ? 0 : 1;
+}
+
+static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
+{
+	int ret;
+
+	if (ftsdc010_card_detect(mmc) == 0) {
+		printf("%s: no medium present\n", __func__);
+		return -1;
+	} else {
+		ret = ftsdc010_send_request(mmc, cmd, data);
+		return ret;
+	}
+}
+
+static void ftsdc010_set_clk(struct mmc *mmc)
+{
+	struct mmc_host *host = mmc->priv;
+	unsigned char clk_div;
+	unsigned char real_rate;
+	unsigned int clock;
+
+	debug("%s: mmc_set_clock: %x\n", __func__, mmc->clock);
+	clock = readl(&host->reg->ccr);
+
+	if (mmc->clock == 0) {
+		real_rate = 0;
+		clock |= FTSDC010_CCR_CLK_DIS;
+	} else {
+		debug("%s, mmc->clock: %08x, origin clock: %08x\n",
+			 __func__, mmc->clock, clock);
+
+		for (clk_div = 0; clk_div <= 127; clk_div++) {
+			real_rate = (CONFIG_SYS_CLK_FREQ / 2) /
+					(2 * (clk_div + 1));
+
+			if (real_rate <= mmc->clock)
+				break;
+		}
+
+		debug("%s: computed real_rete: %x, clk_div: %x\n",
+			 __func__, real_rate, clk_div);
+
+		if (clk_div > 127)
+			debug("%s: no match clock rate, %x\n",
+				__func__, mmc->clock);
+
+		clock = (clock & ~FTSDC010_CCR_CLK_DIV(0x7f)) |
+				FTSDC010_CCR_CLK_DIV(clk_div);
+
+		clock &= ~FTSDC010_CCR_CLK_DIS;
+	}
+
+	debug("%s, set clock: %08x\n", __func__, clock);
+	writel(clock, &host->reg->ccr);
+}
+
+static void ftsdc010_set_ios(struct mmc *mmc)
+{
+	struct mmc_host *host = mmc->priv;
+	unsigned int power;
+	unsigned long val;
+	unsigned int bus_width;
+
+	debug("%s: bus_width: %x, clock: %d\n",
+		__func__, mmc->bus_width, mmc->clock);
+
+	/* set pcr: power on */
+	power = readl(&host->reg->pcr);
+	power |= FTSDC010_PCR_POWER_ON;
+	writel(power, &host->reg->pcr);
+
+	if (mmc->clock)
+		ftsdc010_set_clk(mmc);
+
+	/* set bwr: bus width reg */
+	bus_width = readl(&host->reg->bwr);
+	bus_width &= ~(FTSDC010_BWR_WIDE_8_BUS | FTSDC010_BWR_WIDE_4_BUS |
+			FTSDC010_BWR_SINGLE_BUS);
+
+	if (mmc->bus_width == 8)
+		bus_width |= FTSDC010_BWR_WIDE_8_BUS;
+	else if (mmc->bus_width == 4)
+		bus_width |= FTSDC010_BWR_WIDE_4_BUS;
+	else
+		bus_width |= FTSDC010_BWR_SINGLE_BUS;
+
+	writel(bus_width, &host->reg->bwr);
+
+	/* set fifo depth */
+	val = readl(&host->reg->feature);
+	host->fifo_len = FTSDC010_FEATURE_FIFO_DEPTH(val) * 4; /* 4 bytes */
+
+	/* set data timeout register */
+	val = -1;
+	writel(val, &host->reg->dtr);
+}
+
+static void ftsdc010_reset(struct mmc_host *host)
+{
+	unsigned int timeout;
+
+	/* Do SDC_RST: Software reset for all register */
+	writel(FTSDC010_CMD_SDC_RST, &host->reg->cmd);
+
+	host->clock = 0;
+
+	/* this hardware has no reset finish flag to read */
+	/* wait 100ms maximum */
+	timeout = 100;
+
+	/* hw clears the bit when it's done */
+	while (readl(&host->reg->dtr) != 0) {
+		if (timeout == 0) {
+			printf("%s: reset timeout error\n", __func__);
+			return;
+		}
+		timeout--;
+		udelay(10*FTSDC010_DELAY_UNIT);
+	}
+}
+
+static int ftsdc010_core_init(struct mmc *mmc)
+{
+	struct mmc_host *host = mmc->priv;
+	unsigned int mask;
+	unsigned int major, minor, revision;
+
+	/* get hardware version */
+	host->version = readl(&host->reg->rev);
+
+	major = FTSDC010_REV_MAJOR(host->version);
+	minor = FTSDC010_REV_MINOR(host->version);
+	revision = FTSDC010_REV_REVISION(host->version);
+
+	printf("ftsdc010 hardware ver: %d_%d_r%d\n", major, minor, revision);
+
+	/* Interrupt MASK register init - mask all */
+	writel(0x0, &host->reg->int_mask);
+
+	mask = FTSDC010_INT_MASK_CMD_SEND |
+		FTSDC010_INT_MASK_DATA_END |
+		FTSDC010_INT_MASK_CARD_CHANGE;
+#ifdef CONFIG_FTSDC010_SDIO
+	mask |= FTSDC010_INT_MASK_CP_READY |
+		FTSDC010_INT_MASK_CP_BUF_READY |
+		FTSDC010_INT_MASK_PLAIN_TEXT_READY |
+		FTSDC010_INT_MASK_SDIO_IRPT;
+#endif
+
+	writel(mask, &host->reg->int_mask);
+
+	return 0;
+}
+
+int ftsdc010_mmc_init(int dev_index)
+{
+	struct mmc *mmc;
+	struct mmc_host *host;
+
+	mmc = &ftsdc010_dev[dev_index];
+
+	sprintf(mmc->name, "FTSDC010 SD/MMC");
+	mmc->priv = &ftsdc010_host[dev_index];
+	mmc->send_cmd = ftsdc010_request;
+	mmc->set_ios = ftsdc010_set_ios;
+	mmc->init = ftsdc010_core_init;
+
+	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
+
+	mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+	mmc->f_min = CONFIG_SYS_CLK_FREQ / 2 / (2*128);
+	mmc->f_max = CONFIG_SYS_CLK_FREQ / 2 / 2;
+
+	ftsdc010_host[dev_index].clock = 0;
+	ftsdc010_host[dev_index].reg = ftsdc010_get_base_mmc(dev_index);
+	mmc_register(mmc);
+
+	/* reset mmc */
+	host = (struct mmc_host *)mmc->priv;
+	ftsdc010_reset(host);
+
+	return 0;
+}