Merge branch 'master' of git://git.denx.de/u-boot-i2c

8 files changed, 769 insertions, 18 deletions

diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index ef32f13..4a12976 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -28,6 +28,7 @@ LIB	:= $(obj)libi2c.a
 COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
 COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
 COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
+COBJS-$(CONFIG_I2C_KIRKWOOD) += kirkwood_i2c.o
 COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
diff --git a/drivers/i2c/kirkwood_i2c.c b/drivers/i2c/kirkwood_i2c.c
new file mode 100644
index 0000000..dd30499
--- /dev/null
+++ b/drivers/i2c/kirkwood_i2c.c
@@ -0,0 +1,484 @@
+/*
+ * Driver for the i2c controller on the Marvell line of host bridges
+ * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, Orion SoC family),
+ * and Kirkwood family.
+ *
+ * Based on:
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2005 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * ported from Linux to u-boot
+ * (C) Copyright 2009
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ */
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
+#if defined(CONFIG_I2C_MUX)
+static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0;
+#endif
+
+/* Register defines */
+#define	KW_I2C_REG_SLAVE_ADDR			0x00
+#define	KW_I2C_REG_DATA				0x04
+#define	KW_I2C_REG_CONTROL			0x08
+#define	KW_I2C_REG_STATUS			0x0c
+#define	KW_I2C_REG_BAUD				0x0c
+#define	KW_I2C_REG_EXT_SLAVE_ADDR		0x10
+#define	KW_I2C_REG_SOFT_RESET			0x1c
+
+#define	KW_I2C_REG_CONTROL_ACK			0x00000004
+#define	KW_I2C_REG_CONTROL_IFLG			0x00000008
+#define	KW_I2C_REG_CONTROL_STOP			0x00000010
+#define	KW_I2C_REG_CONTROL_START		0x00000020
+#define	KW_I2C_REG_CONTROL_TWSIEN		0x00000040
+#define	KW_I2C_REG_CONTROL_INTEN		0x00000080
+
+/* Ctlr status values */
+#define	KW_I2C_STATUS_BUS_ERR			0x00
+#define	KW_I2C_STATUS_MAST_START		0x08
+#define	KW_I2C_STATUS_MAST_REPEAT_START		0x10
+#define	KW_I2C_STATUS_MAST_WR_ADDR_ACK		0x18
+#define	KW_I2C_STATUS_MAST_WR_ADDR_NO_ACK	0x20
+#define	KW_I2C_STATUS_MAST_WR_ACK		0x28
+#define	KW_I2C_STATUS_MAST_WR_NO_ACK		0x30
+#define	KW_I2C_STATUS_MAST_LOST_ARB		0x38
+#define	KW_I2C_STATUS_MAST_RD_ADDR_ACK		0x40
+#define	KW_I2C_STATUS_MAST_RD_ADDR_NO_ACK	0x48
+#define	KW_I2C_STATUS_MAST_RD_DATA_ACK		0x50
+#define	KW_I2C_STATUS_MAST_RD_DATA_NO_ACK	0x58
+#define	KW_I2C_STATUS_MAST_WR_ADDR_2_ACK	0xd0
+#define	KW_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK	0xd8
+#define	KW_I2C_STATUS_MAST_RD_ADDR_2_ACK	0xe0
+#define	KW_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK	0xe8
+#define	KW_I2C_STATUS_NO_STATUS			0xf8
+
+/* Driver states */
+enum {
+	KW_I2C_STATE_INVALID,
+	KW_I2C_STATE_IDLE,
+	KW_I2C_STATE_WAITING_FOR_START_COND,
+	KW_I2C_STATE_WAITING_FOR_ADDR_1_ACK,
+	KW_I2C_STATE_WAITING_FOR_ADDR_2_ACK,
+	KW_I2C_STATE_WAITING_FOR_SLAVE_ACK,
+	KW_I2C_STATE_WAITING_FOR_SLAVE_DATA,
+};
+
+/* Driver actions */
+enum {
+	KW_I2C_ACTION_INVALID,
+	KW_I2C_ACTION_CONTINUE,
+	KW_I2C_ACTION_SEND_START,
+	KW_I2C_ACTION_SEND_ADDR_1,
+	KW_I2C_ACTION_SEND_ADDR_2,
+	KW_I2C_ACTION_SEND_DATA,
+	KW_I2C_ACTION_RCV_DATA,
+	KW_I2C_ACTION_RCV_DATA_STOP,
+	KW_I2C_ACTION_SEND_STOP,
+};
+
+/* defines to get compatible with Linux driver */
+#define IRQ_NONE	0x0
+#define IRQ_HANDLED	0x01
+
+#define I2C_M_TEN	0x01
+#define I2C_M_RD	0x02
+#define	I2C_M_REV_DIR_ADDR	0x04;
+
+struct i2c_msg {
+	u32	addr;
+	u32	flags;
+	u8	*buf;
+	u32	len;
+};
+
+struct kirkwood_i2c_data {
+	int			irq;
+	u32			state;
+	u32			action;
+	u32			aborting;
+	u32			cntl_bits;
+	void			*reg_base;
+	u32			reg_base_p;
+	u32			reg_size;
+	u32			addr1;
+	u32			addr2;
+	u32			bytes_left;
+	u32			byte_posn;
+	u32			block;
+	int			rc;
+	u32			freq_m;
+	u32			freq_n;
+	struct i2c_msg		*msg;
+};
+
+static struct kirkwood_i2c_data __drv_data __attribute__ ((section (".data")));
+static struct kirkwood_i2c_data *drv_data = &__drv_data;
+static struct i2c_msg __i2c_msg __attribute__ ((section (".data")));
+static struct i2c_msg *kirkwood_i2c_msg = &__i2c_msg;
+
+/*
+ *****************************************************************************
+ *
+ *	Finite State Machine & Interrupt Routines
+ *
+ *****************************************************************************
+ */
+
+static inline int abs(int n)
+{
+	 if(n >= 0)
+		return n;
+	else
+		return n * -1;
+}
+
+static void kirkwood_calculate_speed(int speed)
+{
+	int	calcspeed;
+	int	diff;
+	int	best_diff = CONFIG_SYS_TCLK;
+	int	best_speed = 0;
+	int	m, n;
+	int	tmp[8] = {2, 4, 8, 16, 32, 64, 128, 256};
+
+	for (n = 0; n < 8; n++) {
+		for (m = 0; m < 16; m++) {
+			calcspeed = CONFIG_SYS_TCLK / (10 * (m + 1) * tmp[n]);
+			diff = abs((speed - calcspeed));
+			if ( diff < best_diff) {
+				best_diff = diff;
+				best_speed = calcspeed;
+				drv_data->freq_m = m;
+				drv_data->freq_n = n;
+			}
+		}
+	}
+}
+
+/* Reset hardware and initialize FSM */
+static void
+kirkwood_i2c_hw_init(int speed, int slaveadd)
+{
+	drv_data->state = KW_I2C_STATE_IDLE;
+
+	kirkwood_calculate_speed(speed);
+	writel(0, CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_SOFT_RESET);
+	writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)),
+		CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_BAUD);
+	writel(slaveadd, CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_SLAVE_ADDR);
+	writel(0, CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_EXT_SLAVE_ADDR);
+	writel(KW_I2C_REG_CONTROL_TWSIEN | KW_I2C_REG_CONTROL_STOP,
+		CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+}
+
+static void
+kirkwood_i2c_fsm(u32 status)
+{
+	/*
+	 * If state is idle, then this is likely the remnants of an old
+	 * operation that driver has given up on or the user has killed.
+	 * If so, issue the stop condition and go to idle.
+	 */
+	if (drv_data->state == KW_I2C_STATE_IDLE) {
+		drv_data->action = KW_I2C_ACTION_SEND_STOP;
+		return;
+	}
+
+	/* The status from the ctlr [mostly] tells us what to do next */
+	switch (status) {
+	/* Start condition interrupt */
+	case KW_I2C_STATUS_MAST_START: /* 0x08 */
+	case KW_I2C_STATUS_MAST_REPEAT_START: /* 0x10 */
+		drv_data->action = KW_I2C_ACTION_SEND_ADDR_1;
+		drv_data->state = KW_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
+		break;
+
+	/* Performing a write */
+	case KW_I2C_STATUS_MAST_WR_ADDR_ACK: /* 0x18 */
+		if (drv_data->msg->flags & I2C_M_TEN) {
+			drv_data->action = KW_I2C_ACTION_SEND_ADDR_2;
+			drv_data->state =
+				KW_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
+			break;
+		}
+		/* FALLTHRU */
+	case KW_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
+	case KW_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
+		if ((drv_data->bytes_left == 0)
+				|| (drv_data->aborting
+					&& (drv_data->byte_posn != 0))) {
+			drv_data->action = KW_I2C_ACTION_SEND_STOP;
+			drv_data->state = KW_I2C_STATE_IDLE;
+		} else {
+			drv_data->action = KW_I2C_ACTION_SEND_DATA;
+			drv_data->state =
+				KW_I2C_STATE_WAITING_FOR_SLAVE_ACK;
+			drv_data->bytes_left--;
+		}
+		break;
+
+	/* Performing a read */
+	case KW_I2C_STATUS_MAST_RD_ADDR_ACK: /* 40 */
+		if (drv_data->msg->flags & I2C_M_TEN) {
+			drv_data->action = KW_I2C_ACTION_SEND_ADDR_2;
+			drv_data->state =
+				KW_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
+			break;
+		}
+		/* FALLTHRU */
+	case KW_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
+		if (drv_data->bytes_left == 0) {
+			drv_data->action = KW_I2C_ACTION_SEND_STOP;
+			drv_data->state = KW_I2C_STATE_IDLE;
+			break;
+		}
+		/* FALLTHRU */
+	case KW_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
+		if (status != KW_I2C_STATUS_MAST_RD_DATA_ACK)
+			drv_data->action = KW_I2C_ACTION_CONTINUE;
+		else {
+			drv_data->action = KW_I2C_ACTION_RCV_DATA;
+			drv_data->bytes_left--;
+		}
+		drv_data->state = KW_I2C_STATE_WAITING_FOR_SLAVE_DATA;
+
+		if ((drv_data->bytes_left == 1) || drv_data->aborting)
+			drv_data->cntl_bits &= ~KW_I2C_REG_CONTROL_ACK;
+		break;
+
+	case KW_I2C_STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */
+		drv_data->action = KW_I2C_ACTION_RCV_DATA_STOP;
+		drv_data->state = KW_I2C_STATE_IDLE;
+		break;
+
+	case KW_I2C_STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */
+	case KW_I2C_STATUS_MAST_WR_NO_ACK: /* 30 */
+	case KW_I2C_STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */
+		/* Doesn't seem to be a device at other end */
+		drv_data->action = KW_I2C_ACTION_SEND_STOP;
+		drv_data->state = KW_I2C_STATE_IDLE;
+		drv_data->rc = -ENODEV;
+		break;
+
+	default:
+		printf("kirkwood_i2c_fsm: Ctlr Error -- state: 0x%x, "
+			"status: 0x%x, addr: 0x%x, flags: 0x%x\n",
+			 drv_data->state, status, drv_data->msg->addr,
+			 drv_data->msg->flags);
+		drv_data->action = KW_I2C_ACTION_SEND_STOP;
+		kirkwood_i2c_hw_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+		drv_data->rc = -EIO;
+	}
+}
+
+static void
+kirkwood_i2c_do_action(void)
+{
+	switch(drv_data->action) {
+	case KW_I2C_ACTION_CONTINUE:
+		writel(drv_data->cntl_bits,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_SEND_START:
+		writel(drv_data->cntl_bits | KW_I2C_REG_CONTROL_START,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_SEND_ADDR_1:
+		writel(drv_data->addr1,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_SEND_ADDR_2:
+		writel(drv_data->addr2,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_SEND_DATA:
+		writel(drv_data->msg->buf[drv_data->byte_posn++],
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_RCV_DATA:
+		drv_data->msg->buf[drv_data->byte_posn++] =
+			readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_RCV_DATA_STOP:
+		drv_data->msg->buf[drv_data->byte_posn++] =
+			readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
+		drv_data->cntl_bits &= ~KW_I2C_REG_CONTROL_INTEN;
+		writel(drv_data->cntl_bits | KW_I2C_REG_CONTROL_STOP,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		drv_data->block = 0;
+		break;
+
+	case KW_I2C_ACTION_INVALID:
+	default:
+		printf("kirkwood_i2c_do_action: Invalid action: %d\n",
+			drv_data->action);
+		drv_data->rc = -EIO;
+		/* FALLTHRU */
+	case KW_I2C_ACTION_SEND_STOP:
+		drv_data->cntl_bits &= ~KW_I2C_REG_CONTROL_INTEN;
+		writel(drv_data->cntl_bits | KW_I2C_REG_CONTROL_STOP,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		drv_data->block = 0;
+		break;
+	}
+}
+
+static	int
+kirkwood_i2c_intr(void)
+{
+	u32		status;
+	u32		ctrl;
+	int		rc = IRQ_NONE;
+
+	ctrl = readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+	while ((ctrl & KW_I2C_REG_CONTROL_IFLG) &&
+		(drv_data->rc == 0)) {
+		status = readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_STATUS);
+		kirkwood_i2c_fsm(status);
+		kirkwood_i2c_do_action();
+		rc = IRQ_HANDLED;
+		ctrl = readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		udelay(1000);
+	}
+	return rc;
+}
+
+static void
+kirkwood_i2c_doio(struct i2c_msg *msg)
+{
+	int	ret;
+
+	while ((drv_data->rc == 0) && (drv_data->state != KW_I2C_STATE_IDLE)) {
+		/* poll Status register */
+		ret = kirkwood_i2c_intr();
+		if (ret == IRQ_NONE)
+			udelay(10);
+	}
+}
+
+static void
+kirkwood_i2c_prepare_for_io(struct i2c_msg *msg)
+{
+	u32	dir = 0;
+
+	drv_data->msg = msg;
+	drv_data->byte_posn = 0;
+	drv_data->bytes_left = msg->len;
+	drv_data->aborting = 0;
+	drv_data->rc = 0;
+	/* in u-boot we use no IRQs */
+	drv_data->cntl_bits = KW_I2C_REG_CONTROL_ACK | KW_I2C_REG_CONTROL_TWSIEN;
+
+	if (msg->flags & I2C_M_RD)
+		dir = 1;
+	if (msg->flags & I2C_M_TEN) {
+		drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
+		drv_data->addr2 = (u32)msg->addr & 0xff;
+	} else {
+		drv_data->addr1 = ((u32)msg->addr & 0x7f) << 1 | dir;
+		drv_data->addr2 = 0;
+	}
+	/* OK, no start it (from kirkwood_i2c_execute_msg())*/
+	drv_data->action = KW_I2C_ACTION_SEND_START;
+	drv_data->state = KW_I2C_STATE_WAITING_FOR_START_COND;
+	drv_data->block = 1;
+	kirkwood_i2c_do_action();
+}
+
+void
+i2c_init(int speed, int slaveadd)
+{
+	kirkwood_i2c_hw_init(speed, slaveadd);
+}
+
+int
+i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+	kirkwood_i2c_msg->buf = data;
+	kirkwood_i2c_msg->len = length;
+	kirkwood_i2c_msg->addr = dev;
+	kirkwood_i2c_msg->flags = I2C_M_RD;
+
+	kirkwood_i2c_prepare_for_io(kirkwood_i2c_msg);
+	kirkwood_i2c_doio(kirkwood_i2c_msg);
+	return drv_data->rc;
+}
+
+int
+i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+	kirkwood_i2c_msg->buf = data;
+	kirkwood_i2c_msg->len = length;
+	kirkwood_i2c_msg->addr = dev;
+	kirkwood_i2c_msg->flags = 0;
+
+	kirkwood_i2c_prepare_for_io(kirkwood_i2c_msg);
+	kirkwood_i2c_doio(kirkwood_i2c_msg);
+	return drv_data->rc;
+}
+
+int
+i2c_probe(uchar chip)
+{
+	return i2c_read(chip, 0, 0, NULL, 0);
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+#if defined(CONFIG_I2C_MUX)
+	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
+		i2c_bus_num = bus;
+	} else {
+		int	ret;
+
+		ret = i2x_mux_select_mux(bus);
+		if (ret)
+			return ret;
+		i2c_bus_num = 0;
+	}
+	i2c_bus_num_mux = bus;
+#else
+	if (bus > 0) {
+		return -1;
+	}
+
+	i2c_bus_num = bus;
+#endif
+	return 0;
+}
+
+unsigned int i2c_get_bus_num(void)
+{
+#if defined(CONFIG_I2C_MUX)
+	return i2c_bus_num_mux;
+#else
+	return i2c_bus_num;
+#endif
+}
+
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 6784603..1a4c8c9 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -31,7 +31,69 @@ static void flush_fifo(void);
 
 void i2c_init (int speed, int slaveadd)
 {
-	u16 scl;
+	int psc, fsscll, fssclh;
+	int hsscll = 0, hssclh = 0;
+	u32 scll, sclh;
+
+	/* Only handle standard, fast and high speeds */
+	if ((speed != OMAP_I2C_STANDARD) &&
+	    (speed != OMAP_I2C_FAST_MODE) &&
+	    (speed != OMAP_I2C_HIGH_SPEED)) {
+		printf("Error : I2C unsupported speed %d\n", speed);
+		return;
+	}
+
+	psc = I2C_IP_CLK / I2C_INTERNAL_SAMPLING_CLK;
+	psc -= 1;
+	if (psc < I2C_PSC_MIN) {
+		printf("Error : I2C unsupported prescalar %d\n", psc);
+		return;
+	}
+
+	if (speed == OMAP_I2C_HIGH_SPEED) {
+		/* High speed */
+
+		/* For first phase of HS mode */
+		fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK /
+			(2 * OMAP_I2C_FAST_MODE);
+
+		fsscll -= I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM;
+		fssclh -= I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM;
+		if (((fsscll < 0) || (fssclh < 0)) ||
+		    ((fsscll > 255) || (fssclh > 255))) {
+			printf("Error : I2C initializing first phase clock\n");
+			return;
+		}
+
+		/* For second phase of HS mode */
+		hsscll = hssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed);
+
+		hsscll -= I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM;
+		hssclh -= I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM;
+		if (((fsscll < 0) || (fssclh < 0)) ||
+		    ((fsscll > 255) || (fssclh > 255))) {
+			printf("Error : I2C initializing second phase clock\n");
+			return;
+		}
+
+		scll = (unsigned int)hsscll << 8 | (unsigned int)fsscll;
+		sclh = (unsigned int)hssclh << 8 | (unsigned int)fssclh;
+
+	} else {
+		/* Standard and fast speed */
+		fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed);
+
+		fsscll -= I2C_FASTSPEED_SCLL_TRIM;
+		fssclh -= I2C_FASTSPEED_SCLH_TRIM;
+		if (((fsscll < 0) || (fssclh < 0)) ||
+		    ((fsscll > 255) || (fssclh > 255))) {
+			printf("Error : I2C initializing clock\n");
+			return;
+		}
+
+		scll = (unsigned int)fsscll;
+		sclh = (unsigned int)fssclh;
+	}
 
 	writew(0x2, I2C_SYSC); /* for ES2 after soft reset */
 	udelay(1000);
@@ -42,12 +104,10 @@ void i2c_init (int speed, int slaveadd)
 		udelay (50000);
 	}
 
-	/* 12MHz I2C module clock */
-	writew (0, I2C_PSC);
-	speed = speed/1000;		    /* 100 or 400 */
-	scl = ((12000/(speed*2)) - 7);	/* use 7 when PSC = 0 */
-	writew (scl, I2C_SCLL);
-	writew (scl, I2C_SCLH);
+	writew(psc, I2C_PSC);
+	writew(scll, I2C_SCLL);
+	writew(sclh, I2C_SCLH);
+
 	/* own address */
 	writew (slaveadd, I2C_OA);
 	writew (I2C_CON_EN, I2C_CON);
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index ea2bf87..f6df60f 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -30,6 +30,7 @@ COBJS-$(CONFIG_DS4510)  += ds4510.o
 COBJS-$(CONFIG_FSL_LAW) += fsl_law.o
 COBJS-$(CONFIG_NS87308) += ns87308.o
 COBJS-$(CONFIG_STATUS_LED) += status_led.o
+COBJS-$(CONFIG_TWL4030_LED) += twl4030_led.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/misc/twl4030_led.c b/drivers/misc/twl4030_led.c
new file mode 100644
index 0000000..bfdafef
--- /dev/null
+++ b/drivers/misc/twl4030_led.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix at windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * twl4030_led_init is from cpu/omap3/common.c, power_init_r
+ *
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Sunil Kumar <sunilsaini05 at gmail.com>
+ *	Shashi Ranjan <shashiranjanmca05 at gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ *	Richard Woodruff <r-woodruff2 at ti.com>
+ *	Syed Mohammed Khasim <khasim at ti.com>
+ *
+ */
+
+#include <twl4030.h>
+
+#define LEDAON			(0x1 << 0)
+#define LEDBON			(0x1 << 1)
+#define LEDAPWM			(0x1 << 4)
+#define LEDBPWM			(0x1 << 5)
+
+void twl4030_led_init(void)
+{
+	unsigned char byte;
+
+	/* enable LED */
+	byte = LEDBPWM | LEDAPWM | LEDBON | LEDAON;
+
+	twl4030_i2c_write_u8(TWL4030_CHIP_LED, byte,
+			     TWL4030_LED_LEDEN);
+
+}
diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c
index e90db7e..9e09434 100644
--- a/drivers/mmc/omap3_mmc.c
+++ b/drivers/mmc/omap3_mmc.c
@@ -28,6 +28,7 @@
 #include <mmc.h>
 #include <part.h>
 #include <i2c.h>
+#include <twl4030.h>
 #include <asm/io.h>
 #include <asm/arch/mmc.h>
 
@@ -58,21 +59,11 @@ block_dev_desc_t *mmc_get_dev(int dev)
 	return (block_dev_desc_t *) &mmc_blk_dev;
 }
 
-void twl4030_mmc_config(void)
-{
-	unsigned char data;
-
-	data = DEV_GRP_P1;
-	i2c_write(PWRMGT_ADDR_ID4, VMMC1_DEV_GRP, 1, &data, 1);
-	data = VMMC1_VSEL_30;
-	i2c_write(PWRMGT_ADDR_ID4, VMMC1_DEDICATED, 1, &data, 1);
-}
-
 unsigned char mmc_board_init(void)
 {
 	t2_t *t2_base = (t2_t *)T2_BASE;
 
-	twl4030_mmc_config();
+	twl4030_power_mmc_init();
 
 	writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 |
 		PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
new file mode 100644
index 0000000..dd06514
--- /dev/null
+++ b/drivers/power/Makefile
@@ -0,0 +1,47 @@
+#
+# Copyright (c) 2009 Wind River Systems, Inc.
+# Tom Rix <Tom.Rix at windriver.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libpower.a
+
+COBJS-$(CONFIG_TWL4030_POWER)	+= twl4030.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+########################################################################
diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
new file mode 100644
index 0000000..eb066cb
--- /dev/null
+++ b/drivers/power/twl4030.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix at windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * twl4030_power_reset_init is derived from code on omapzoom,
+ * git://git.omapzoom.com/repo/u-boot.git
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ *
+ * twl4030_power_init is from cpu/omap3/common.c, power_init_r
+ *
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Sunil Kumar <sunilsaini05 at gmail.com>
+ *	Shashi Ranjan <shashiranjanmca05 at gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ *	Richard Woodruff <r-woodruff2 at ti.com>
+ *	Syed Mohammed Khasim <khasim at ti.com>
+ *
+ */
+
+#include <twl4030.h>
+
+/*
+ * Power Reset
+ */
+void twl4030_power_reset_init(void)
+{
+	u8 val = 0;
+	if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &val,
+				TWL4030_PM_MASTER_P1_SW_EVENTS)) {
+		printf("Error:TWL4030: failed to read the power register\n");
+		printf("Could not initialize hardware reset\n");
+	} else {
+		val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
+		if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, val,
+					 TWL4030_PM_MASTER_P1_SW_EVENTS)) {
+			printf("Error:TWL4030: failed to write the power register\n");
+			printf("Could not initialize hardware reset\n");
+		}
+	}
+}
+
+
+/*
+ * Power Init
+ */
+#define DEV_GRP_P1		0x20
+#define VAUX3_VSEL_28		0x03
+#define DEV_GRP_ALL		0xE0
+#define VPLL2_VSEL_18		0x05
+#define VDAC_VSEL_18		0x03
+
+void twl4030_power_init(void)
+{
+	unsigned char byte;
+
+	/* set VAUX3 to 2.8V */
+	byte = DEV_GRP_P1;
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+			     TWL4030_PM_RECEIVER_VAUX3_DEV_GRP);
+	byte = VAUX3_VSEL_28;
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+			     TWL4030_PM_RECEIVER_VAUX3_DEDICATED);
+
+	/* set VPLL2 to 1.8V */
+	byte = DEV_GRP_ALL;
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+			     TWL4030_PM_RECEIVER_VPLL2_DEV_GRP);
+	byte = VPLL2_VSEL_18;
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+			     TWL4030_PM_RECEIVER_VPLL2_DEDICATED);
+
+	/* set VDAC to 1.8V */
+	byte = DEV_GRP_P1;
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+			     TWL4030_PM_RECEIVER_VDAC_DEV_GRP);
+	byte = VDAC_VSEL_18;
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+			     TWL4030_PM_RECEIVER_VDAC_DEDICATED);
+}
+
+#define VMMC1_VSEL_30		0x02
+
+void twl4030_power_mmc_init(void)
+{
+	unsigned char byte;
+
+	byte = DEV_GRP_P1;
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+			     TWL4030_PM_RECEIVER_VMMC1_DEV_GRP);
+
+	/* 3 Volts */
+	byte = VMMC1_VSEL_30;
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+			     TWL4030_PM_RECEIVER_VMMC1_DEDICATED);
+}