summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorKuo-Jung Su <dantesu@faraday-tech.com>2013-05-15 15:29:23 +0800
committerMarek Vasut <marex@denx.de>2013-06-12 22:22:51 +0200
commite82a316d7f9425943d86c1ed61c5cf57b0d5b188 (patch)
treef32a19b18dde2c92c54c86018f88689057e9f6fb /drivers
parentaa1550588cc60549bf3a97dc6dccb7de4c022aa6 (diff)
downloadu-boot-imx-e82a316d7f9425943d86c1ed61c5cf57b0d5b188.zip
u-boot-imx-e82a316d7f9425943d86c1ed61c5cf57b0d5b188.tar.gz
u-boot-imx-e82a316d7f9425943d86c1ed61c5cf57b0d5b188.tar.bz2
usb: ehci: add Faraday USB 2.0 EHCI support
This patch adds support to both Faraday FUSBH200 and FOTG210, the differences between Faraday EHCI and standard EHCI are listed bellow: 1. The PORTSC starts at 0x30 instead of 0x44. 2. The CONFIGFLAG(0x40) is not only un-implemented, and also has its address space removed. 3. Faraday EHCI is a TDI design, but it doesn't compatible with the general TDI implementation found at both U-Boot and Linux. 4. The ISOC descriptors differ from standard EHCI in several ways. But since U-boot doesn't support ISOC, we don't have to worry about that. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Marek Vasut <marex@denx.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/host/Makefile1
-rw-r--r--drivers/usb/host/ehci-faraday.c148
-rw-r--r--drivers/usb/host/ehci-hcd.c5
3 files changed, 154 insertions, 0 deletions
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 87a5970..98f2a10 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -43,6 +43,7 @@ COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-mpc512x.o
else
COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
endif
+COBJS-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
COBJS-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
diff --git a/drivers/usb/host/ehci-faraday.c b/drivers/usb/host/ehci-faraday.c
new file mode 100644
index 0000000..86add36
--- /dev/null
+++ b/drivers/usb/host/ehci-faraday.c
@@ -0,0 +1,148 @@
+/*
+ * Faraday USB 2.0 EHCI Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb.h>
+#include <usb/fusbh200.h>
+#include <usb/fotg210.h>
+
+#include "ehci.h"
+
+#ifndef CONFIG_USB_EHCI_BASE_LIST
+#define CONFIG_USB_EHCI_BASE_LIST { CONFIG_USB_EHCI_BASE }
+#endif
+
+union ehci_faraday_regs {
+ struct fusbh200_regs usb;
+ struct fotg210_regs otg;
+};
+
+static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs)
+{
+ return !readl(&regs->usb.easstr);
+}
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, struct ehci_hccr **ret_hccr,
+ struct ehci_hcor **ret_hcor)
+{
+ struct ehci_hccr *hccr;
+ struct ehci_hcor *hcor;
+ union ehci_faraday_regs *regs;
+ uint32_t base_list[] = CONFIG_USB_EHCI_BASE_LIST;
+
+ if (index < 0 || index >= ARRAY_SIZE(base_list))
+ return -1;
+ regs = (void __iomem *)base_list[index];
+ hccr = (struct ehci_hccr *)&regs->usb.hccr;
+ hcor = (struct ehci_hcor *)&regs->usb.hcor;
+
+ if (ehci_is_fotg2xx(regs)) {
+ /* A-device bus reset */
+ /* ... Power off A-device */
+ setbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSDROP);
+ /* ... Drop vbus and bus traffic */
+ clrbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSREQ);
+ mdelay(1);
+ /* ... Power on A-device */
+ clrbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSDROP);
+ /* ... Drive vbus and bus traffic */
+ setbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSREQ);
+ mdelay(1);
+ /* Disable OTG & DEV interrupts, triggered at level-high */
+ writel(IMR_IRQLH | IMR_OTG | IMR_DEV, &regs->otg.imr);
+ /* Clear all interrupt status */
+ writel(ISR_HOST | ISR_OTG | ISR_DEV, &regs->otg.isr);
+ } else {
+ /* Interrupt=level-high */
+ setbits_le32(&regs->usb.bmcsr, BMCSR_IRQLH);
+ /* VBUS on */
+ clrbits_le32(&regs->usb.bmcsr, BMCSR_VBUS_OFF);
+ /* Disable all interrupts */
+ writel(0x00, &regs->usb.bmier);
+ writel(0x1f, &regs->usb.bmisr);
+ }
+
+ *ret_hccr = hccr;
+ *ret_hcor = hcor;
+
+ return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(int index)
+{
+ return 0;
+}
+
+/*
+ * This ehci_set_usbmode() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+void ehci_set_usbmode(int index)
+{
+ /* nothing needs to be done */
+}
+
+/*
+ * This ehci_get_port_speed() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
+{
+ int spd, ret = PORTSC_PSPD_HS;
+ union ehci_faraday_regs *regs = (void __iomem *)((ulong)hcor - 0x10);
+
+ if (ehci_is_fotg2xx(regs))
+ spd = OTGCSR_SPD(readl(&regs->otg.otgcsr));
+ else
+ spd = BMCSR_SPD(readl(&regs->usb.bmcsr));
+
+ switch (spd) {
+ case 0: /* full speed */
+ ret = PORTSC_PSPD_FS;
+ break;
+ case 1: /* low speed */
+ ret = PORTSC_PSPD_LS;
+ break;
+ case 2: /* high speed */
+ ret = PORTSC_PSPD_HS;
+ break;
+ default:
+ printf("ehci-faraday: invalid device speed\n");
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * This ehci_get_portsc_register() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port)
+{
+ /* Faraday EHCI has one and only one portsc register */
+ if (port) {
+ /* Printing the message would cause a scan failure! */
+ debug("The request port(%d) is not configured\n", port);
+ return NULL;
+ }
+
+ /* Faraday EHCI PORTSC register offset is 0x20 from hcor */
+ return (uint32_t *)((uint8_t *)hcor + 0x20);
+}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 7e8e85c..28b6007 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -589,10 +589,12 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token);
} else {
dev->act_len = 0;
+#ifndef CONFIG_USB_EHCI_FARADAY
debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts),
ehci_readl(&ctrl->hcor->or_portsc[0]),
ehci_readl(&ctrl->hcor->or_portsc[1]));
+#endif
}
free(qtd);
@@ -980,10 +982,13 @@ int usb_lowlevel_init(int index, void **controller)
cmd |= CMD_RUN;
ehci_writel(&ehcic[index].hcor->or_usbcmd, cmd);
+#ifndef CONFIG_USB_EHCI_FARADAY
/* take control over the ports */
cmd = ehci_readl(&ehcic[index].hcor->or_configflag);
cmd |= FLAG_CF;
ehci_writel(&ehcic[index].hcor->or_configflag, cmd);
+#endif
+
/* unblock posted write */
cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
mdelay(5);