Merge branch 'master' of git://git.denx.de/u-boot-arm

16 files changed, 1224 insertions, 213 deletions

diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 36d5e5f..e33586d 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -6,7 +6,6 @@
 #
 
 obj-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
-obj-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
 obj-$(CONFIG_DW_I2C) += designware_i2c.o
 obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
 obj-$(CONFIG_I2C_MV) += mv_i2c.o
@@ -16,6 +15,7 @@ obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
 obj-$(CONFIG_U8500_I2C) += u8500_i2c.o
 obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
 obj-$(CONFIG_SYS_I2C) += i2c_core.o
+obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
 obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
 obj-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
 obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o
diff --git a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c
index e56fe75..9ca99c4 100644
--- a/drivers/i2c/davinci_i2c.c
+++ b/drivers/i2c/davinci_i2c.c
@@ -1,8 +1,9 @@
 /*
  * TI DaVinci (TMS320DM644x) I2C driver.
  *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ * (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net>
  * --------------------------------------------------------
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -12,305 +13,372 @@
 #include <i2c.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/i2c_defs.h>
+#include <asm/io.h>
+#include "davinci_i2c.h"
 
 #define CHECK_NACK() \
 	do {\
 		if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\
-			REG(I2C_CON) = 0;\
-			return(1);\
-		}\
+			REG(&(i2c_base->i2c_con)) = 0;\
+			return 1;\
+		} \
 	} while (0)
 
+static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap);
 
-static int wait_for_bus(void)
+static int wait_for_bus(struct i2c_adapter *adap)
 {
+	struct i2c_regs *i2c_base = davinci_get_base(adap);
 	int	stat, timeout;
 
-	REG(I2C_STAT) = 0xffff;
+	REG(&(i2c_base->i2c_stat)) = 0xffff;
 
 	for (timeout = 0; timeout < 10; timeout++) {
-		if (!((stat = REG(I2C_STAT)) & I2C_STAT_BB)) {
-			REG(I2C_STAT) = 0xffff;
-			return(0);
+		stat = REG(&(i2c_base->i2c_stat));
+		if (!((stat) & I2C_STAT_BB)) {
+			REG(&(i2c_base->i2c_stat)) = 0xffff;
+			return 0;
 		}
 
-		REG(I2C_STAT) = stat;
+		REG(&(i2c_base->i2c_stat)) = stat;
 		udelay(50000);
 	}
 
-	REG(I2C_STAT) = 0xffff;
-	return(1);
+	REG(&(i2c_base->i2c_stat)) = 0xffff;
+	return 1;
 }
 
 
-static int poll_i2c_irq(int mask)
+static int poll_i2c_irq(struct i2c_adapter *adap, int mask)
 {
+	struct i2c_regs *i2c_base = davinci_get_base(adap);
 	int	stat, timeout;
 
 	for (timeout = 0; timeout < 10; timeout++) {
 		udelay(1000);
-		stat = REG(I2C_STAT);
-		if (stat & mask) {
-			return(stat);
-		}
+		stat = REG(&(i2c_base->i2c_stat));
+		if (stat & mask)
+			return stat;
 	}
 
-	REG(I2C_STAT) = 0xffff;
-	return(stat | I2C_TIMEOUT);
+	REG(&(i2c_base->i2c_stat)) = 0xffff;
+	return stat | I2C_TIMEOUT;
 }
 
-
-void flush_rx(void)
+static void flush_rx(struct i2c_adapter *adap)
 {
+	struct i2c_regs *i2c_base = davinci_get_base(adap);
+
 	while (1) {
-		if (!(REG(I2C_STAT) & I2C_STAT_RRDY))
+		if (!(REG(&(i2c_base->i2c_stat)) & I2C_STAT_RRDY))
 			break;
 
-		REG(I2C_DRR);
-		REG(I2C_STAT) = I2C_STAT_RRDY;
+		REG(&(i2c_base->i2c_drr));
+		REG(&(i2c_base->i2c_stat)) = I2C_STAT_RRDY;
 		udelay(1000);
 	}
 }
 
+static uint davinci_i2c_setspeed(struct i2c_adapter *adap, uint speed)
+{
+	struct i2c_regs *i2c_base = davinci_get_base(adap);
+	uint32_t	div, psc;
+
+	psc = 2;
+	/* SCLL + SCLH */
+	div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10;
+	REG(&(i2c_base->i2c_psc)) = psc; /* 27MHz / (2 + 1) = 9MHz */
+	REG(&(i2c_base->i2c_scll)) = (div * 50) / 100; /* 50% Duty */
+	REG(&(i2c_base->i2c_sclh)) = div - REG(&(i2c_base->i2c_scll));
+
+	adap->speed	= speed;
+	return 0;
+}
 
-void i2c_init(int speed, int slaveadd)
+static void davinci_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 {
-	u_int32_t	div, psc;
+	struct i2c_regs *i2c_base = davinci_get_base(adap);
 
-	if (REG(I2C_CON) & I2C_CON_EN) {
-		REG(I2C_CON) = 0;
-		udelay (50000);
+	if (REG(&(i2c_base->i2c_con)) & I2C_CON_EN) {
+		REG(&(i2c_base->i2c_con)) = 0;
+		udelay(50000);
 	}
 
-	psc = 2;
-	div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10;	/* SCLL + SCLH */
-	REG(I2C_PSC) = psc;			/* 27MHz / (2 + 1) = 9MHz */
-	REG(I2C_SCLL) = (div * 50) / 100;	/* 50% Duty */
-	REG(I2C_SCLH) = div - REG(I2C_SCLL);
+	davinci_i2c_setspeed(adap, speed);
 
-	REG(I2C_OA) = slaveadd;
-	REG(I2C_CNT) = 0;
+	REG(&(i2c_base->i2c_oa)) = slaveadd;
+	REG(&(i2c_base->i2c_cnt)) = 0;
 
 	/* Interrupts must be enabled or I2C module won't work */
-	REG(I2C_IE) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE |
+	REG(&(i2c_base->i2c_ie)) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE |
 		I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE;
 
 	/* Now enable I2C controller (get it out of reset) */
-	REG(I2C_CON) = I2C_CON_EN;
+	REG(&(i2c_base->i2c_con)) = I2C_CON_EN;
 
 	udelay(1000);
 }
 
-int i2c_set_bus_speed(unsigned int speed)
-{
-	i2c_init(speed, CONFIG_SYS_I2C_SLAVE);
-	return 0;
-}
-
-int i2c_probe(u_int8_t chip)
+static int davinci_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
 {
+	struct i2c_regs *i2c_base = davinci_get_base(adap);
 	int	rc = 1;
 
-	if (chip == REG(I2C_OA)) {
-		return(rc);
-	}
+	if (chip == REG(&(i2c_base->i2c_oa)))
+		return rc;
 
-	REG(I2C_CON) = 0;
-	if (wait_for_bus()) {return(1);}
+	REG(&(i2c_base->i2c_con)) = 0;
+	if (wait_for_bus(adap))
+		return 1;
 
 	/* try to read one byte from current (or only) address */
-	REG(I2C_CNT) = 1;
-	REG(I2C_SA) = chip;
-	REG(I2C_CON) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP);
-	udelay (50000);
+	REG(&(i2c_base->i2c_cnt)) = 1;
+	REG(&(i2c_base->i2c_sa))  = chip;
+	REG(&(i2c_base->i2c_con)) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
+				     I2C_CON_STP);
+	udelay(50000);
 
-	if (!(REG(I2C_STAT) & I2C_STAT_NACK)) {
+	if (!(REG(&(i2c_base->i2c_stat)) & I2C_STAT_NACK)) {
 		rc = 0;
-		flush_rx();
-		REG(I2C_STAT) = 0xffff;
+		flush_rx(adap);
+		REG(&(i2c_base->i2c_stat)) = 0xffff;
 	} else {
-		REG(I2C_STAT) = 0xffff;
-		REG(I2C_CON) |= I2C_CON_STP;
+		REG(&(i2c_base->i2c_stat)) = 0xffff;
+		REG(&(i2c_base->i2c_con)) |= I2C_CON_STP;
 		udelay(20000);
-		if (wait_for_bus()) {return(1);}
+		if (wait_for_bus(adap))
+			return 1;
 	}
 
-	flush_rx();
-	REG(I2C_STAT) = 0xffff;
-	REG(I2C_CNT) = 0;
-	return(rc);
+	flush_rx(adap);
+	REG(&(i2c_base->i2c_stat)) = 0xffff;
+	REG(&(i2c_base->i2c_cnt)) = 0;
+	return rc;
 }
 
-
-int i2c_read(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
+static int davinci_i2c_read(struct i2c_adapter *adap, uint8_t chip,
+				uint32_t addr, int alen, uint8_t *buf, int len)
 {
-	u_int32_t	tmp;
+	struct i2c_regs *i2c_base = davinci_get_base(adap);
+	uint32_t	tmp;
 	int		i;
 
 	if ((alen < 0) || (alen > 2)) {
-		printf("%s(): bogus address length %x\n", __FUNCTION__, alen);
-		return(1);
+		printf("%s(): bogus address length %x\n", __func__, alen);
+		return 1;
 	}
 
-	if (wait_for_bus()) {return(1);}
+	if (wait_for_bus(adap))
+		return 1;
 
 	if (alen != 0) {
 		/* Start address phase */
 		tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX;
-		REG(I2C_CNT) = alen;
-		REG(I2C_SA) = chip;
-		REG(I2C_CON) = tmp;
+		REG(&(i2c_base->i2c_cnt)) = alen;
+		REG(&(i2c_base->i2c_sa)) = chip;
+		REG(&(i2c_base->i2c_con)) = tmp;
 
-		tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+		tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK);
 
 		CHECK_NACK();
 
 		switch (alen) {
-			case 2:
-				/* Send address MSByte */
-				if (tmp & I2C_STAT_XRDY) {
-					REG(I2C_DXR) = (addr >> 8) & 0xff;
-				} else {
-					REG(I2C_CON) = 0;
-					return(1);
-				}
-
-				tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
-
-				CHECK_NACK();
-				/* No break, fall through */
-			case 1:
-				/* Send address LSByte */
-				if (tmp & I2C_STAT_XRDY) {
-					REG(I2C_DXR) = addr & 0xff;
-				} else {
-					REG(I2C_CON) = 0;
-					return(1);
-				}
-
-				tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK | I2C_STAT_ARDY);
-
-				CHECK_NACK();
-
-				if (!(tmp & I2C_STAT_ARDY)) {
-					REG(I2C_CON) = 0;
-					return(1);
-				}
+		case 2:
+			/* Send address MSByte */
+			if (tmp & I2C_STAT_XRDY) {
+				REG(&(i2c_base->i2c_dxr)) = (addr >> 8) & 0xff;
+			} else {
+				REG(&(i2c_base->i2c_con)) = 0;
+				return 1;
+			}
+
+			tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK);
+
+			CHECK_NACK();
+			/* No break, fall through */
+		case 1:
+			/* Send address LSByte */
+			if (tmp & I2C_STAT_XRDY) {
+				REG(&(i2c_base->i2c_dxr)) = addr & 0xff;
+			} else {
+				REG(&(i2c_base->i2c_con)) = 0;
+				return 1;
+			}
+
+			tmp = poll_i2c_irq(adap, I2C_STAT_XRDY |
+					   I2C_STAT_NACK | I2C_STAT_ARDY);
+
+			CHECK_NACK();
+
+			if (!(tmp & I2C_STAT_ARDY)) {
+				REG(&(i2c_base->i2c_con)) = 0;
+				return 1;
+			}
 		}
 	}
 
 	/* Address phase is over, now read 'len' bytes and stop */
 	tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP;
-	REG(I2C_CNT) = len & 0xffff;
-	REG(I2C_SA) = chip;
-	REG(I2C_CON) = tmp;
+	REG(&(i2c_base->i2c_cnt)) = len & 0xffff;
+	REG(&(i2c_base->i2c_sa)) = chip;
+	REG(&(i2c_base->i2c_con)) = tmp;
 
 	for (i = 0; i < len; i++) {
-		tmp = poll_i2c_irq(I2C_STAT_RRDY | I2C_STAT_NACK | I2C_STAT_ROVR);
+		tmp = poll_i2c_irq(adap, I2C_STAT_RRDY | I2C_STAT_NACK |
+				   I2C_STAT_ROVR);
 
 		CHECK_NACK();
 
 		if (tmp & I2C_STAT_RRDY) {
-			buf[i] = REG(I2C_DRR);
+			buf[i] = REG(&(i2c_base->i2c_drr));
 		} else {
-			REG(I2C_CON) = 0;
-			return(1);
+			REG(&(i2c_base->i2c_con)) = 0;
+			return 1;
 		}
 	}
 
-	tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);
+	tmp = poll_i2c_irq(adap, I2C_STAT_SCD | I2C_STAT_NACK);
 
 	CHECK_NACK();
 
 	if (!(tmp & I2C_STAT_SCD)) {
-		REG(I2C_CON) = 0;
-		return(1);
+		REG(&(i2c_base->i2c_con)) = 0;
+		return 1;
 	}
 
-	flush_rx();
-	REG(I2C_STAT) = 0xffff;
-	REG(I2C_CNT) = 0;
-	REG(I2C_CON) = 0;
+	flush_rx(adap);
+	REG(&(i2c_base->i2c_stat)) = 0xffff;
+	REG(&(i2c_base->i2c_cnt)) = 0;
+	REG(&(i2c_base->i2c_con)) = 0;
 
-	return(0);
+	return 0;
 }
 
-
-int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
+static int davinci_i2c_write(struct i2c_adapter *adap, uint8_t chip,
+				uint32_t addr, int alen, uint8_t *buf, int len)
 {
-	u_int32_t	tmp;
+	struct i2c_regs *i2c_base = davinci_get_base(adap);
+	uint32_t	tmp;
 	int		i;
 
 	if ((alen < 0) || (alen > 2)) {
-		printf("%s(): bogus address length %x\n", __FUNCTION__, alen);
-		return(1);
+		printf("%s(): bogus address length %x\n", __func__, alen);
+		return 1;
 	}
 	if (len < 0) {
-		printf("%s(): bogus length %x\n", __FUNCTION__, len);
-		return(1);
+		printf("%s(): bogus length %x\n", __func__, len);
+		return 1;
 	}
 
-	if (wait_for_bus()) {return(1);}
+	if (wait_for_bus(adap))
+		return 1;
 
 	/* Start address phase */
-	tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP;
-	REG(I2C_CNT) = (alen == 0) ? len & 0xffff : (len & 0xffff) + alen;
-	REG(I2C_SA) = chip;
-	REG(I2C_CON) = tmp;
+	tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
+		I2C_CON_TRX | I2C_CON_STP;
+	REG(&(i2c_base->i2c_cnt)) = (alen == 0) ?
+		len & 0xffff : (len & 0xffff) + alen;
+	REG(&(i2c_base->i2c_sa)) = chip;
+	REG(&(i2c_base->i2c_con)) = tmp;
 
 	switch (alen) {
-		case 2:
-			/* Send address MSByte */
-			tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+	case 2:
+		/* Send address MSByte */
+		tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK);
 
-			CHECK_NACK();
+		CHECK_NACK();
 
-			if (tmp & I2C_STAT_XRDY) {
-				REG(I2C_DXR) = (addr >> 8) & 0xff;
-			} else {
-				REG(I2C_CON) = 0;
-				return(1);
-			}
-			/* No break, fall through */
-		case 1:
-			/* Send address LSByte */
-			tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+		if (tmp & I2C_STAT_XRDY) {
+			REG(&(i2c_base->i2c_dxr)) = (addr >> 8) & 0xff;
+		} else {
+			REG(&(i2c_base->i2c_con)) = 0;
+			return 1;
+		}
+		/* No break, fall through */
+	case 1:
+		/* Send address LSByte */
+		tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK);
 
-			CHECK_NACK();
+		CHECK_NACK();
 
-			if (tmp & I2C_STAT_XRDY) {
-				REG(I2C_DXR) = addr & 0xff;
-			} else {
-				REG(I2C_CON) = 0;
-				return(1);
-			}
+		if (tmp & I2C_STAT_XRDY) {
+			REG(&(i2c_base->i2c_dxr)) = addr & 0xff;
+		} else {
+			REG(&(i2c_base->i2c_con)) = 0;
+			return 1;
+		}
 	}
 
 	for (i = 0; i < len; i++) {
-		tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+		tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK);
 
 		CHECK_NACK();
 
-		if (tmp & I2C_STAT_XRDY) {
-			REG(I2C_DXR) = buf[i];
-		} else {
-			return(1);
-		}
+		if (tmp & I2C_STAT_XRDY)
+			REG(&(i2c_base->i2c_dxr)) = buf[i];
+		else
+			return 1;
 	}
 
-	tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);
+	tmp = poll_i2c_irq(adap, I2C_STAT_SCD | I2C_STAT_NACK);
 
 	CHECK_NACK();
 
 	if (!(tmp & I2C_STAT_SCD)) {
-		REG(I2C_CON) = 0;
-		return(1);
+		REG(&(i2c_base->i2c_con)) = 0;
+		return 1;
 	}
 
-	flush_rx();
-	REG(I2C_STAT) = 0xffff;
-	REG(I2C_CNT) = 0;
-	REG(I2C_CON) = 0;
+	flush_rx(adap);
+	REG(&(i2c_base->i2c_stat)) = 0xffff;
+	REG(&(i2c_base->i2c_cnt)) = 0;
+	REG(&(i2c_base->i2c_con)) = 0;
+
+	return 0;
+}
+
+static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap)
+{
+	switch (adap->hwadapnr) {
+#if I2C_BUS_MAX >= 3
+	case 2:
+		return (struct i2c_regs *)I2C2_BASE;
+#endif
+#if I2C_BUS_MAX >= 2
+	case 1:
+		return (struct i2c_regs *)I2C1_BASE;
+#endif
+	case 0:
+		return (struct i2c_regs *)I2C_BASE;
+
+	default:
+		printf("wrong hwadapnr: %d\n", adap->hwadapnr);
+	}
 
-	return(0);
+	return NULL;
 }
+
+U_BOOT_I2C_ADAP_COMPLETE(davinci_0, davinci_i2c_init, davinci_i2c_probe,
+			 davinci_i2c_read, davinci_i2c_write,
+			 davinci_i2c_setspeed,
+			 CONFIG_SYS_DAVINCI_I2C_SPEED,
+			 CONFIG_SYS_DAVINCI_I2C_SLAVE,
+			 0)
+
+#if I2C_BUS_MAX >= 2
+U_BOOT_I2C_ADAP_COMPLETE(davinci_1, davinci_i2c_init, davinci_i2c_probe,
+			 davinci_i2c_read, davinci_i2c_write,
+			 davinci_i2c_setspeed,
+			 CONFIG_SYS_DAVINCI_I2C_SPEED1,
+			 CONFIG_SYS_DAVINCI_I2C_SLAVE1,
+			 1)
+#endif
+
+#if I2C_BUS_MAX >= 3
+U_BOOT_I2C_ADAP_COMPLETE(davinci_2, davinci_i2c_init, davinci_i2c_probe,
+			 davinci_i2c_read, davinci_i2c_write,
+			 davinci_i2c_setspeed,
+			 CONFIG_SYS_DAVINCI_I2C_SPEED2,
+			 CONFIG_SYS_DAVINCI_I2C_SLAVE2,
+			 2)
+#endif
diff --git a/drivers/i2c/davinci_i2c.h b/drivers/i2c/davinci_i2c.h
new file mode 100644
index 0000000..20d4342
--- /dev/null
+++ b/drivers/i2c/davinci_i2c.h
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2004-2014
+ * Texas Instruments, <www.ti.com>
+ *
+ * Some changes copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _DAVINCI_I2C_H_
+#define _DAVINCI_I2C_H_
+
+#define I2C_WRITE		0
+#define I2C_READ		1
+
+struct i2c_regs {
+	u32	i2c_oa;
+	u32	i2c_ie;
+	u32	i2c_stat;
+	u32	i2c_scll;
+	u32	i2c_sclh;
+	u32	i2c_cnt;
+	u32	i2c_drr;
+	u32	i2c_sa;
+	u32	i2c_dxr;
+	u32	i2c_con;
+	u32	i2c_iv;
+	u32	res_2c;
+	u32	i2c_psc;
+};
+
+/* I2C masks */
+
+/* I2C Interrupt Enable Register (I2C_IE): */
+#define I2C_IE_SCD_IE	(1 << 5)  /* Stop condition detect interrupt enable */
+#define I2C_IE_XRDY_IE	(1 << 4)  /* Transmit data ready interrupt enable */
+#define I2C_IE_RRDY_IE	(1 << 3)  /* Receive data ready interrupt enable */
+#define I2C_IE_ARDY_IE	(1 << 2)  /* Register access ready interrupt enable */
+#define I2C_IE_NACK_IE	(1 << 1)  /* No acknowledgment interrupt enable */
+#define I2C_IE_AL_IE	(1 << 0)  /* Arbitration lost interrupt enable */
+
+/* I2C Status Register (I2C_STAT): */
+
+#define I2C_STAT_BB	(1 << 12) /* Bus busy */
+#define I2C_STAT_ROVR	(1 << 11) /* Receive overrun */
+#define I2C_STAT_XUDF	(1 << 10) /* Transmit underflow */
+#define I2C_STAT_AAS	(1 << 9)  /* Address as slave */
+#define I2C_STAT_SCD	(1 << 5)  /* Stop condition detect */
+#define I2C_STAT_XRDY	(1 << 4)  /* Transmit data ready */
+#define I2C_STAT_RRDY	(1 << 3)  /* Receive data ready */
+#define I2C_STAT_ARDY	(1 << 2)  /* Register access ready */
+#define I2C_STAT_NACK	(1 << 1)  /* No acknowledgment interrupt enable */
+#define I2C_STAT_AL	(1 << 0)  /* Arbitration lost interrupt enable */
+
+/* I2C Interrupt Code Register (I2C_INTCODE): */
+
+#define I2C_INTCODE_MASK	7
+#define I2C_INTCODE_NONE	0
+#define I2C_INTCODE_AL		1 /* Arbitration lost */
+#define I2C_INTCODE_NAK		2 /* No acknowledgement/general call */
+#define I2C_INTCODE_ARDY	3 /* Register access ready */
+#define I2C_INTCODE_RRDY	4 /* Rcv data ready */
+#define I2C_INTCODE_XRDY	5 /* Xmit data ready */
+#define I2C_INTCODE_SCD		6 /* Stop condition detect */
+
+/* I2C Configuration Register (I2C_CON): */
+
+#define I2C_CON_EN	(1 << 5)   /* I2C module enable */
+#define I2C_CON_STB	(1 << 4)   /* Start byte mode (master mode only) */
+#define I2C_CON_MST	(1 << 10)  /* Master/slave mode */
+#define I2C_CON_TRX	(1 << 9)   /* Tx/Rx mode (master mode only) */
+#define I2C_CON_XA	(1 << 8)   /* Expand address */
+#define I2C_CON_STP	(1 << 11)  /* Stop condition (master mode only) */
+#define I2C_CON_STT	(1 << 13)  /* Start condition (master mode only) */
+#define I2C_CON_FREE	(1 << 14)  /* Free run on emulation */
+
+#define I2C_TIMEOUT	0xffff0000 /* Timeout mask for poll_i2c_irq() */
+
+#endif
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 02b149c..4eb354d 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -18,6 +18,9 @@ obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
 obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
 obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o
 obj-$(CONFIG_SPL_NAND_INIT) += nand.o
+ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
+obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
+endif
 
 else # not spl
 
diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c
index c84851b..bd89b06 100644
--- a/drivers/mtd/nand/am335x_spl_bch.c
+++ b/drivers/mtd/nand/am335x_spl_bch.c
@@ -16,7 +16,7 @@
 #include <linux/mtd/nand_ecc.h>
 
 static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
-static nand_info_t mtd;
+nand_info_t nand_info[1];
 static struct nand_chip nand_chip;
 
 #define ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
@@ -30,12 +30,12 @@ static struct nand_chip nand_chip;
 static int nand_command(int block, int page, uint32_t offs,
 	u8 cmd)
 {
-	struct nand_chip *this = mtd.priv;
+	struct nand_chip *this = nand_info[0].priv;
 	int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
 	void (*hwctrl)(struct mtd_info *mtd, int cmd,
 			unsigned int ctrl) = this->cmd_ctrl;
 
-	while (!this->dev_ready(&mtd))
+	while (!this->dev_ready(&nand_info[0]))
 		;
 
 	/* Emulate NAND_CMD_READOOB */
@@ -45,11 +45,11 @@ static int nand_command(int block, int page, uint32_t offs,
 	}
 
 	/* Begin command latch cycle */
-	hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+	hwctrl(&nand_info[0], cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
 
 	if (cmd == NAND_CMD_RESET) {
-		hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
-		while (!this->dev_ready(&mtd))
+		hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+		while (!this->dev_ready(&nand_info[0]))
 			;
 		return 0;
 	}
@@ -60,35 +60,35 @@ static int nand_command(int block, int page, uint32_t offs,
 
 	/* Set ALE and clear CLE to start address cycle */
 	/* Column address */
-	hwctrl(&mtd, offs & 0xff,
+	hwctrl(&nand_info[0], offs & 0xff,
 		       NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
-	hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
+	hwctrl(&nand_info[0], (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
 	/* Row address */
-	hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
-	hwctrl(&mtd, ((page_addr >> 8) & 0xff),
+	hwctrl(&nand_info[0], (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
+	hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff),
 		       NAND_CTRL_ALE); /* A[27:20] */
 #ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
 	/* One more address cycle for devices > 128MiB */
-	hwctrl(&mtd, (page_addr >> 16) & 0x0f,
+	hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f,
 		       NAND_CTRL_ALE); /* A[31:28] */
 #endif
-	hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+	hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
 	if (cmd == NAND_CMD_READ0) {
 		/* Latch in address */
-		hwctrl(&mtd, NAND_CMD_READSTART,
+		hwctrl(&nand_info[0], NAND_CMD_READSTART,
 			   NAND_CTRL_CLE | NAND_CTRL_CHANGE);
-		hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+		hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
 		/*
 		 * Wait a while for the data to be ready
 		 */
-		while (!this->dev_ready(&mtd))
+		while (!this->dev_ready(&nand_info[0]))
 			;
 	} else if (cmd == NAND_CMD_RNDOUT) {
-		hwctrl(&mtd, NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE |
+		hwctrl(&nand_info[0], NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE |
 					NAND_CTRL_CHANGE);
-		hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+		hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 	}
 
 	return 0;
@@ -96,7 +96,7 @@ static int nand_command(int block, int page, uint32_t offs,
 
 static int nand_is_bad_block(int block)
 {
-	struct nand_chip *this = mtd.priv;
+	struct nand_chip *this = nand_info[0].priv;
 
 	nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS,
 		NAND_CMD_READOOB);
@@ -117,7 +117,7 @@ static int nand_is_bad_block(int block)
 
 static int nand_read_page(int block, int page, void *dst)
 {
-	struct nand_chip *this = mtd.priv;
+	struct nand_chip *this = nand_info[0].priv;
 	u_char ecc_calc[ECCTOTAL];
 	u_char ecc_code[ECCTOTAL];
 	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
@@ -133,15 +133,15 @@ static int nand_read_page(int block, int page, void *dst)
 	nand_command(block, page, 0, NAND_CMD_READ0);
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
-		this->ecc.hwctl(&mtd, NAND_ECC_READ);
+		this->ecc.hwctl(&nand_info[0], NAND_ECC_READ);
 		nand_command(block, page, data_pos, NAND_CMD_RNDOUT);
 
-		this->read_buf(&mtd, p, eccsize);
+		this->read_buf(&nand_info[0], p, eccsize);
 
 		nand_command(block, page, oob_pos, NAND_CMD_RNDOUT);
 
-		this->read_buf(&mtd, oob, eccbytes);
-		this->ecc.calculate(&mtd, p, &ecc_calc[i]);
+		this->read_buf(&nand_info[0], oob, eccbytes);
+		this->ecc.calculate(&nand_info[0], p, &ecc_calc[i]);
 
 		data_pos += eccsize;
 		oob_pos += eccbytes;
@@ -160,7 +160,7 @@ static int nand_read_page(int block, int page, void *dst)
 		 * from correct_data(). We just hope that all possible errors
 		 * are corrected by this routine.
 		 */
-		this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
+		this->ecc.correct(&nand_info[0], p, &ecc_code[i], &ecc_calc[i]);
 	}
 
 	return 0;
@@ -206,13 +206,13 @@ void nand_init(void)
 	/*
 	 * Init board specific nand support
 	 */
-	mtd.priv = &nand_chip;
+	nand_info[0].priv = &nand_chip;
 	nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
 		(void  __iomem *)CONFIG_SYS_NAND_BASE;
 	board_nand_init(&nand_chip);
 
 	if (nand_chip.select_chip)
-		nand_chip.select_chip(&mtd, 0);
+		nand_chip.select_chip(&nand_info[0], 0);
 
 	/* NAND chip may require reset after power-on */
 	nand_command(0, 0, 0, NAND_CMD_RESET);
@@ -222,5 +222,5 @@ void nand_init(void)
 void nand_deselect(void)
 {
 	if (nand_chip.select_chip)
-		nand_chip.select_chip(&mtd, -1);
+		nand_chip.select_chip(&nand_info[0], -1);
 }
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 5b17d7b..75b03a7 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -609,6 +609,9 @@ void davinci_nand_init(struct nand_chip *nand)
 #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
 	nand->bbt_options	  |= NAND_BBT_USE_FLASH;
 #endif
+#ifdef CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+	nand->options	  |= NAND_NO_SUBPAGE_WRITE;
+#endif
 #ifdef CONFIG_SYS_NAND_HW_ECC
 	nand->ecc.mode = NAND_ECC_HW;
 	nand->ecc.size = 512;
diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c
index 2935530..1954b7e 100644
--- a/drivers/mtd/spi/spi_spl_load.c
+++ b/drivers/mtd/spi/spi_spl_load.c
@@ -13,6 +13,35 @@
 #include <spi_flash.h>
 #include <spl.h>
 
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * Load the kernel, check for a valid header we can parse, and if found load
+ * the kernel and then device tree.
+ */
+static int spi_load_image_os(struct spi_flash *flash,
+			     struct image_header *header)
+{
+	/* Read for a header, parse or error out. */
+	spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40,
+		       (void *)header);
+
+	if (image_get_magic(header) != IH_MAGIC)
+		return -1;
+
+	spl_parse_image_header(header);
+
+	spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
+		       spl_image.size, (void *)spl_image.load_addr);
+
+	/* Read device tree. */
+	spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
+		       CONFIG_SYS_SPI_ARGS_SIZE,
+		       (void *)CONFIG_SYS_SPL_ARGS_ADDR);
+
+	return 0;
+}
+#endif
+
 /*
  * The main entry for SPI booting. It's necessary that SDRAM is already
  * configured and available since this code loads the main U-Boot image
@@ -37,10 +66,15 @@ void spl_spi_load_image(void)
 	/* use CONFIG_SYS_TEXT_BASE as temporary storage area */
 	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
 
-	/* Load u-boot, mkimage header is 64 bytes. */
-	spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
-		       (void *)header);
-	spl_parse_image_header(header);
-	spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
-		       spl_image.size, (void *)spl_image.load_addr);
+#ifdef CONFIG_SPL_OS_BOOT
+	if (spl_start_uboot() || spi_load_image_os(flash, header))
+#endif
+	{
+		/* Load u-boot, mkimage header is 64 bytes. */
+		spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
+			       (void *)header);
+		spl_parse_image_header(header);
+		spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
+			       spl_image.size, (void *)spl_image.load_addr);
+	}
 }
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index c25b3c9..6005f7e 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -29,6 +29,8 @@ obj-$(CONFIG_FTGMAC100) += ftgmac100.o
 obj-$(CONFIG_FTMAC110) += ftmac110.o
 obj-$(CONFIG_FTMAC100) += ftmac100.o
 obj-$(CONFIG_GRETH) += greth.o
+obj-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
+obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
 obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
 obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
 obj-$(CONFIG_LAN91C96) += lan91c96.o
diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c
new file mode 100644
index 0000000..f95c928
--- /dev/null
+++ b/drivers/net/keystone_net.c
@@ -0,0 +1,716 @@
+/*
+ * Ethernet driver for TI K2HK EVM.
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#include <common.h>
+#include <command.h>
+
+#include <net.h>
+#include <miiphy.h>
+#include <malloc.h>
+#include <asm/arch/emac_defs.h>
+#include <asm/arch/psc_defs.h>
+#include <asm/arch/keystone_nav.h>
+
+unsigned int emac_dbg;
+
+unsigned int emac_open;
+static unsigned int sys_has_mdio = 1;
+
+#ifdef KEYSTONE2_EMAC_GIG_ENABLE
+#define emac_gigabit_enable(x)	keystone2_eth_gigabit_enable(x)
+#else
+#define emac_gigabit_enable(x)	/* no gigabit to enable */
+#endif
+
+#define RX_BUFF_NUMS	24
+#define RX_BUFF_LEN	1520
+#define MAX_SIZE_STREAM_BUFFER RX_BUFF_LEN
+
+static u8 rx_buffs[RX_BUFF_NUMS * RX_BUFF_LEN] __aligned(16);
+
+struct rx_buff_desc net_rx_buffs = {
+	.buff_ptr	= rx_buffs,
+	.num_buffs	= RX_BUFF_NUMS,
+	.buff_len	= RX_BUFF_LEN,
+	.rx_flow	= 22,
+};
+
+static void keystone2_eth_mdio_enable(void);
+
+static int gen_get_link_speed(int phy_addr);
+
+/* EMAC Addresses */
+static volatile struct emac_regs	*adap_emac =
+	(struct emac_regs *)EMAC_EMACSL_BASE_ADDR;
+static volatile struct mdio_regs	*adap_mdio =
+	(struct mdio_regs *)EMAC_MDIO_BASE_ADDR;
+
+int keystone2_eth_read_mac_addr(struct eth_device *dev)
+{
+	struct eth_priv_t *eth_priv;
+	u32 maca = 0;
+	u32 macb = 0;
+
+	eth_priv = (struct eth_priv_t *)dev->priv;
+
+	/* Read the e-fuse mac address */
+	if (eth_priv->slave_port == 1) {
+		maca = __raw_readl(MAC_ID_BASE_ADDR);
+		macb = __raw_readl(MAC_ID_BASE_ADDR + 4);
+	}
+
+	dev->enetaddr[0] = (macb >>  8) & 0xff;
+	dev->enetaddr[1] = (macb >>  0) & 0xff;
+	dev->enetaddr[2] = (maca >> 24) & 0xff;
+	dev->enetaddr[3] = (maca >> 16) & 0xff;
+	dev->enetaddr[4] = (maca >>  8) & 0xff;
+	dev->enetaddr[5] = (maca >>  0) & 0xff;
+
+	return 0;
+}
+
+static void keystone2_eth_mdio_enable(void)
+{
+	u_int32_t	clkdiv;
+
+	clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
+
+	writel((clkdiv & 0xffff) |
+	       MDIO_CONTROL_ENABLE |
+	       MDIO_CONTROL_FAULT |
+	       MDIO_CONTROL_FAULT_ENABLE,
+	       &adap_mdio->control);
+
+	while (readl(&adap_mdio->control) & MDIO_CONTROL_IDLE)
+		;
+}
+
+/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
+int keystone2_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
+{
+	int	tmp;
+
+	while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
+		;
+
+	writel(MDIO_USERACCESS0_GO |
+	       MDIO_USERACCESS0_WRITE_READ |
+	       ((reg_num & 0x1f) << 21) |
+	       ((phy_addr & 0x1f) << 16),
+	       &adap_mdio->useraccess0);
+
+	/* Wait for command to complete */
+	while ((tmp = readl(&adap_mdio->useraccess0)) & MDIO_USERACCESS0_GO)
+		;
+
+	if (tmp & MDIO_USERACCESS0_ACK) {
+		*data = tmp & 0xffff;
+		return 0;
+	}
+
+	*data = -1;
+	return -1;
+}
+
+/*
+ * Write to a PHY register via MDIO inteface.
+ * Blocks until operation is complete.
+ */
+int keystone2_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
+{
+	while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
+		;
+
+	writel(MDIO_USERACCESS0_GO |
+	       MDIO_USERACCESS0_WRITE_WRITE |
+	       ((reg_num & 0x1f) << 21) |
+	       ((phy_addr & 0x1f) << 16) |
+	       (data & 0xffff),
+	       &adap_mdio->useraccess0);
+
+	/* Wait for command to complete */
+	while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
+		;
+
+	return 0;
+}
+
+/* PHY functions for a generic PHY */
+static int gen_get_link_speed(int phy_addr)
+{
+	u_int16_t	tmp;
+
+	if ((!keystone2_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp)) &&
+	    (tmp & 0x04)) {
+		return 0;
+	}
+
+	return -1;
+}
+
+static void  __attribute__((unused))
+	keystone2_eth_gigabit_enable(struct eth_device *dev)
+{
+	u_int16_t data;
+	struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+
+	if (sys_has_mdio) {
+		if (keystone2_eth_phy_read(eth_priv->phy_addr, 0, &data) ||
+		    !(data & (1 << 6))) /* speed selection MSB */
+			return;
+	}
+
+	/*
+	 * Check if link detected is giga-bit
+	 * If Gigabit mode detected, enable gigbit in MAC
+	 */
+	writel(readl(&(adap_emac[eth_priv->slave_port - 1].maccontrol)) |
+	       EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE,
+	       &(adap_emac[eth_priv->slave_port - 1].maccontrol))
+		;
+}
+
+int keystone_sgmii_link_status(int port)
+{
+	u32 status = 0;
+
+	status = __raw_readl(SGMII_STATUS_REG(port));
+
+	return status & SGMII_REG_STATUS_LINK;
+}
+
+
+int keystone_get_link_status(struct eth_device *dev)
+{
+	struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+	int sgmii_link;
+	int link_state = 0;
+#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1
+	int j;
+
+	for (j = 0; (j < CONFIG_GET_LINK_STATUS_ATTEMPTS) && (link_state == 0);
+	     j++) {
+#endif
+		sgmii_link =
+			keystone_sgmii_link_status(eth_priv->slave_port - 1);
+
+		if (sgmii_link) {
+			link_state = 1;
+
+			if (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY)
+				if (gen_get_link_speed(eth_priv->phy_addr))
+					link_state = 0;
+		}
+#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1
+	}
+#endif
+	return link_state;
+}
+
+int keystone_sgmii_config(int port, int interface)
+{
+	unsigned int i, status, mask;
+	unsigned int mr_adv_ability, control;
+
+	switch (interface) {
+	case SGMII_LINK_MAC_MAC_AUTONEG:
+		mr_adv_ability	= (SGMII_REG_MR_ADV_ENABLE |
+				   SGMII_REG_MR_ADV_LINK |
+				   SGMII_REG_MR_ADV_FULL_DUPLEX |
+				   SGMII_REG_MR_ADV_GIG_MODE);
+		control		= (SGMII_REG_CONTROL_MASTER |
+				   SGMII_REG_CONTROL_AUTONEG);
+
+		break;
+	case SGMII_LINK_MAC_PHY:
+	case SGMII_LINK_MAC_PHY_FORCED:
+		mr_adv_ability	= SGMII_REG_MR_ADV_ENABLE;
+		control		= SGMII_REG_CONTROL_AUTONEG;
+
+		break;
+	case SGMII_LINK_MAC_MAC_FORCED:
+		mr_adv_ability	= (SGMII_REG_MR_ADV_ENABLE |
+				   SGMII_REG_MR_ADV_LINK |
+				   SGMII_REG_MR_ADV_FULL_DUPLEX |
+				   SGMII_REG_MR_ADV_GIG_MODE);
+		control		= SGMII_REG_CONTROL_MASTER;
+
+		break;
+	case SGMII_LINK_MAC_FIBER:
+		mr_adv_ability	= 0x20;
+		control		= SGMII_REG_CONTROL_AUTONEG;
+
+		break;
+	default:
+		mr_adv_ability	= SGMII_REG_MR_ADV_ENABLE;
+		control		= SGMII_REG_CONTROL_AUTONEG;
+	}
+
+	__raw_writel(0, SGMII_CTL_REG(port));
+
+	/*
+	 * Wait for the SerDes pll to lock,
+	 * but don't trap if lock is never read
+	 */
+	for (i = 0; i < 1000; i++)  {
+		udelay(2000);
+		status = __raw_readl(SGMII_STATUS_REG(port));
+		if ((status & SGMII_REG_STATUS_LOCK) != 0)
+			break;
+	}
+
+	__raw_writel(mr_adv_ability, SGMII_MRADV_REG(port));
+	__raw_writel(control, SGMII_CTL_REG(port));
+
+
+	mask = SGMII_REG_STATUS_LINK;
+
+	if (control & SGMII_REG_CONTROL_AUTONEG)
+		mask |= SGMII_REG_STATUS_AUTONEG;
+
+	for (i = 0; i < 1000; i++) {
+		status = __raw_readl(SGMII_STATUS_REG(port));
+		if ((status & mask) == mask)
+			break;
+	}
+
+	return 0;
+}
+
+int mac_sl_reset(u32 port)
+{
+	u32 i, v;
+
+	if (port >= DEVICE_N_GMACSL_PORTS)
+		return GMACSL_RET_INVALID_PORT;
+
+	/* Set the soft reset bit */
+	DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) +
+		       CPGMACSL_REG_RESET, CPGMAC_REG_RESET_VAL_RESET);
+
+	/* Wait for the bit to clear */
+	for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) {
+		v = DEVICE_REG32_R(DEVICE_EMACSL_BASE(port) +
+				   CPGMACSL_REG_RESET);
+		if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) !=
+		    CPGMAC_REG_RESET_VAL_RESET)
+			return GMACSL_RET_OK;
+	}
+
+	/* Timeout on the reset */
+	return GMACSL_RET_WARN_RESET_INCOMPLETE;
+}
+
+int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg)
+{
+	u32 v, i;
+	int ret = GMACSL_RET_OK;
+
+	if (port >= DEVICE_N_GMACSL_PORTS)
+		return GMACSL_RET_INVALID_PORT;
+
+	if (cfg->max_rx_len > CPGMAC_REG_MAXLEN_LEN) {
+		cfg->max_rx_len = CPGMAC_REG_MAXLEN_LEN;
+		ret = GMACSL_RET_WARN_MAXLEN_TOO_BIG;
+	}
+
+	/* Must wait if the device is undergoing reset */
+	for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) {
+		v = DEVICE_REG32_R(DEVICE_EMACSL_BASE(port) +
+				   CPGMACSL_REG_RESET);
+		if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) !=
+		    CPGMAC_REG_RESET_VAL_RESET)
+			break;
+	}
+
+	if (i == DEVICE_EMACSL_RESET_POLL_COUNT)
+		return GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE;
+
+	DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN,
+		       cfg->max_rx_len);
+
+	DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL,
+		       cfg->ctl);
+
+	return ret;
+}
+
+int ethss_config(u32 ctl, u32 max_pkt_size)
+{
+	u32 i;
+
+	/* Max length register */
+	DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_MAXLEN, max_pkt_size);
+
+	/* Control register */
+	DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_CTL, ctl);
+
+	/* All statistics enabled by default */
+	DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_STAT_PORT_EN,
+		       CPSW_REG_VAL_STAT_ENABLE_ALL);
+
+	/* Reset and enable the ALE */
+	DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_ALE_CONTROL,
+		       CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE |
+		       CPSW_REG_VAL_ALE_CTL_BYPASS);
+
+	/* All ports put into forward mode */
+	for (i = 0; i < DEVICE_CPSW_NUM_PORTS; i++)
+		DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_ALE_PORTCTL(i),
+			       CPSW_REG_VAL_PORTCTL_FORWARD_MODE);
+
+	return 0;
+}
+
+int ethss_start(void)
+{
+	int i;
+	struct mac_sl_cfg cfg;
+
+	cfg.max_rx_len	= MAX_SIZE_STREAM_BUFFER;
+	cfg.ctl		= GMACSL_ENABLE | GMACSL_RX_ENABLE_EXT_CTL;
+
+	for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++) {
+		mac_sl_reset(i);
+		mac_sl_config(i, &cfg);
+	}
+
+	return 0;
+}
+
+int ethss_stop(void)
+{
+	int i;
+
+	for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++)
+		mac_sl_reset(i);
+
+	return 0;
+}
+
+int32_t cpmac_drv_send(u32 *buffer, int num_bytes, int slave_port_num)
+{
+	if (num_bytes < EMAC_MIN_ETHERNET_PKT_SIZE)
+		num_bytes = EMAC_MIN_ETHERNET_PKT_SIZE;
+
+	return netcp_send(buffer, num_bytes, (slave_port_num) << 16);
+}
+
+/* Eth device open */
+static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
+{
+	u_int32_t clkdiv;
+	int link;
+	struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+
+	debug("+ emac_open\n");
+
+	net_rx_buffs.rx_flow	= eth_priv->rx_flow;
+
+	sys_has_mdio =
+		(eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0;
+
+	psc_enable_module(KS2_LPSC_PA);
+	psc_enable_module(KS2_LPSC_CPGMAC);
+
+	sgmii_serdes_setup_156p25mhz();
+
+	if (sys_has_mdio)
+		keystone2_eth_mdio_enable();
+
+	keystone_sgmii_config(eth_priv->slave_port - 1,
+			      eth_priv->sgmii_link_type);
+
+	udelay(10000);
+
+	/* On chip switch configuration */
+	ethss_config(target_get_switch_ctl(), SWITCH_MAX_PKT_SIZE);
+
+	/* TODO: add error handling code */
+	if (qm_init()) {
+		printf("ERROR: qm_init()\n");
+		return -1;
+	}
+	if (netcp_init(&net_rx_buffs)) {
+		qm_close();
+		printf("ERROR: netcp_init()\n");
+		return -1;
+	}
+
+	/*
+	 * Streaming switch configuration. If not present this
+	 * statement is defined to void in target.h.
+	 * If present this is usually defined to a series of register writes
+	 */
+	hw_config_streaming_switch();
+
+	if (sys_has_mdio) {
+		/* Init MDIO & get link state */
+		clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
+		writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE |
+		       MDIO_CONTROL_FAULT, &adap_mdio->control)
+			;
+
+		/* We need to wait for MDIO to start */
+		udelay(1000);
+
+		link = keystone_get_link_status(dev);
+		if (link == 0) {
+			netcp_close();
+			qm_close();
+			return -1;
+		}
+	}
+
+	emac_gigabit_enable(dev);
+
+	ethss_start();
+
+	debug("- emac_open\n");
+
+	emac_open = 1;
+
+	return 0;
+}
+
+/* Eth device close */
+void keystone2_eth_close(struct eth_device *dev)
+{
+	debug("+ emac_close\n");
+
+	if (!emac_open)
+		return;
+
+	ethss_stop();
+
+	netcp_close();
+	qm_close();
+
+	emac_open = 0;
+
+	debug("- emac_close\n");
+}
+
+static int tx_send_loop;
+
+/*
+ * This function sends a single packet on the network and returns
+ * positive number (number of bytes transmitted) or negative for error
+ */
+static int keystone2_eth_send_packet(struct eth_device *dev,
+					void *packet, int length)
+{
+	int ret_status = -1;
+	struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+
+	tx_send_loop = 0;
+
+	if (keystone_get_link_status(dev) == 0)
+		return -1;
+
+	emac_gigabit_enable(dev);
+
+	if (cpmac_drv_send((u32 *)packet, length, eth_priv->slave_port) != 0)
+		return ret_status;
+
+	if (keystone_get_link_status(dev) == 0)
+		return -1;
+
+	emac_gigabit_enable(dev);
+
+	return length;
+}
+
+/*
+ * This function handles receipt of a packet from the network
+ */
+static int keystone2_eth_rcv_packet(struct eth_device *dev)
+{
+	void *hd;
+	int  pkt_size;
+	u32  *pkt;
+
+	hd = netcp_recv(&pkt, &pkt_size);
+	if (hd == NULL)
+		return 0;
+
+	NetReceive((uchar *)pkt, pkt_size);
+
+	netcp_release_rxhd(hd);
+
+	return pkt_size;
+}
+
+/*
+ * This function initializes the EMAC hardware.
+ */
+int keystone2_emac_initialize(struct eth_priv_t *eth_priv)
+{
+	struct eth_device *dev;
+
+	dev = malloc(sizeof(struct eth_device));
+	if (dev == NULL)
+		return -1;
+
+	memset(dev, 0, sizeof(struct eth_device));
+
+	strcpy(dev->name, eth_priv->int_name);
+	dev->priv = eth_priv;
+
+	keystone2_eth_read_mac_addr(dev);
+
+	dev->iobase		= 0;
+	dev->init		= keystone2_eth_open;
+	dev->halt		= keystone2_eth_close;
+	dev->send		= keystone2_eth_send_packet;
+	dev->recv		= keystone2_eth_rcv_packet;
+
+	eth_register(dev);
+
+	return 0;
+}
+
+void sgmii_serdes_setup_156p25mhz(void)
+{
+	unsigned int cnt;
+
+	/*
+	 * configure Serializer/Deserializer (SerDes) hardware. SerDes IP
+	 * hardware vendor published only register addresses and their values
+	 * to be used for configuring SerDes. So had to use hardcoded values
+	 * below.
+	 */
+	clrsetbits_le32(0x0232a000, 0xffff0000, 0x00800000);
+	clrsetbits_le32(0x0232a014, 0x0000ffff, 0x00008282);
+	clrsetbits_le32(0x0232a060, 0x00ffffff, 0x00142438);
+	clrsetbits_le32(0x0232a064, 0x00ffff00, 0x00c3c700);
+	clrsetbits_le32(0x0232a078, 0x0000ff00, 0x0000c000);
+
+	clrsetbits_le32(0x0232a204, 0xff0000ff, 0x38000080);
+	clrsetbits_le32(0x0232a208, 0x000000ff, 0x00000000);
+	clrsetbits_le32(0x0232a20c, 0xff000000, 0x02000000);
+	clrsetbits_le32(0x0232a210, 0xff000000, 0x1b000000);
+	clrsetbits_le32(0x0232a214, 0x0000ffff, 0x00006fb8);
+	clrsetbits_le32(0x0232a218, 0xffff00ff, 0x758000e4);
+	clrsetbits_le32(0x0232a2ac, 0x0000ff00, 0x00004400);
+	clrsetbits_le32(0x0232a22c, 0x00ffff00, 0x00200800);
+	clrsetbits_le32(0x0232a280, 0x00ff00ff, 0x00820082);
+	clrsetbits_le32(0x0232a284, 0xffffffff, 0x1d0f0385);
+
+	clrsetbits_le32(0x0232a404, 0xff0000ff, 0x38000080);
+	clrsetbits_le32(0x0232a408, 0x000000ff, 0x00000000);
+	clrsetbits_le32(0x0232a40c, 0xff000000, 0x02000000);
+	clrsetbits_le32(0x0232a410, 0xff000000, 0x1b000000);
+	clrsetbits_le32(0x0232a414, 0x0000ffff, 0x00006fb8);
+	clrsetbits_le32(0x0232a418, 0xffff00ff, 0x758000e4);
+	clrsetbits_le32(0x0232a4ac, 0x0000ff00, 0x00004400);
+	clrsetbits_le32(0x0232a42c, 0x00ffff00, 0x00200800);
+	clrsetbits_le32(0x0232a480, 0x00ff00ff, 0x00820082);
+	clrsetbits_le32(0x0232a484, 0xffffffff, 0x1d0f0385);
+
+	clrsetbits_le32(0x0232a604, 0xff0000ff, 0x38000080);
+	clrsetbits_le32(0x0232a608, 0x000000ff, 0x00000000);
+	clrsetbits_le32(0x0232a60c, 0xff000000, 0x02000000);
+	clrsetbits_le32(0x0232a610, 0xff000000, 0x1b000000);
+	clrsetbits_le32(0x0232a614, 0x0000ffff, 0x00006fb8);
+	clrsetbits_le32(0x0232a618, 0xffff00ff, 0x758000e4);
+	clrsetbits_le32(0x0232a6ac, 0x0000ff00, 0x00004400);
+	clrsetbits_le32(0x0232a62c, 0x00ffff00, 0x00200800);
+	clrsetbits_le32(0x0232a680, 0x00ff00ff, 0x00820082);
+	clrsetbits_le32(0x0232a684, 0xffffffff, 0x1d0f0385);
+
+	clrsetbits_le32(0x0232a804, 0xff0000ff, 0x38000080);
+	clrsetbits_le32(0x0232a808, 0x000000ff, 0x00000000);
+	clrsetbits_le32(0x0232a80c, 0xff000000, 0x02000000);
+	clrsetbits_le32(0x0232a810, 0xff000000, 0x1b000000);
+	clrsetbits_le32(0x0232a814, 0x0000ffff, 0x00006fb8);
+	clrsetbits_le32(0x0232a818, 0xffff00ff, 0x758000e4);
+	clrsetbits_le32(0x0232a8ac, 0x0000ff00, 0x00004400);
+	clrsetbits_le32(0x0232a82c, 0x00ffff00, 0x00200800);
+	clrsetbits_le32(0x0232a880, 0x00ff00ff, 0x00820082);
+	clrsetbits_le32(0x0232a884, 0xffffffff, 0x1d0f0385);
+
+	clrsetbits_le32(0x0232aa00, 0x0000ff00, 0x00000800);
+	clrsetbits_le32(0x0232aa08, 0xffff0000, 0x38a20000);
+	clrsetbits_le32(0x0232aa30, 0x00ffff00, 0x008a8a00);
+	clrsetbits_le32(0x0232aa84, 0x0000ff00, 0x00000600);
+	clrsetbits_le32(0x0232aa94, 0xff000000, 0x10000000);
+	clrsetbits_le32(0x0232aaa0, 0xff000000, 0x81000000);
+	clrsetbits_le32(0x0232aabc, 0xff000000, 0xff000000);
+	clrsetbits_le32(0x0232aac0, 0x000000ff, 0x0000008b);
+	clrsetbits_le32(0x0232ab08, 0xffff0000, 0x583f0000);
+	clrsetbits_le32(0x0232ab0c, 0x000000ff, 0x0000004e);
+	clrsetbits_le32(0x0232a000, 0x000000ff, 0x00000003);
+	clrsetbits_le32(0x0232aa00, 0x000000ff, 0x0000005f);
+
+	clrsetbits_le32(0x0232aa48, 0x00ffff00, 0x00fd8c00);
+	clrsetbits_le32(0x0232aa54, 0x00ffffff, 0x002fec72);
+	clrsetbits_le32(0x0232aa58, 0xffffff00, 0x00f92100);
+	clrsetbits_le32(0x0232aa5c, 0xffffffff, 0x00040060);
+	clrsetbits_le32(0x0232aa60, 0xffffffff, 0x00008000);
+	clrsetbits_le32(0x0232aa64, 0xffffffff, 0x0c581220);
+	clrsetbits_le32(0x0232aa68, 0xffffffff, 0xe13b0602);
+	clrsetbits_le32(0x0232aa6c, 0xffffffff, 0xb8074cc1);
+	clrsetbits_le32(0x0232aa70, 0xffffffff, 0x3f02e989);
+	clrsetbits_le32(0x0232aa74, 0x000000ff, 0x00000001);
+	clrsetbits_le32(0x0232ab20, 0x00ff0000, 0x00370000);
+	clrsetbits_le32(0x0232ab1c, 0xff000000, 0x37000000);
+	clrsetbits_le32(0x0232ab20, 0x000000ff, 0x0000005d);
+
+	/*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/
+	clrbits_le32(0x0232a010, 1 << 28);
+
+	/* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */
+	clrbits_le32(0x0232a228, 1 << 29);
+	writel(0xF800F8C0, 0x0232bfe0);
+	clrbits_le32(0x0232a428, 1 << 29);
+	writel(0xF800F8C0, 0x0232bfe4);
+	clrbits_le32(0x0232a628, 1 << 29);
+	writel(0xF800F8C0, 0x0232bfe8);
+	clrbits_le32(0x0232a828, 1 << 29);
+	writel(0xF800F8C0, 0x0232bfec);
+
+	/*Enable pll via the pll_ctrl 0x0014*/
+	writel(0xe0000000, 0x0232bff4)
+		;
+
+	/*Waiting for SGMII Serdes PLL lock.*/
+	for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--)
+		;
+
+	for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--)
+		;
+
+	for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--)
+		;
+
+	for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--)
+		;
+
+	udelay(45000);
+}
+
+void sgmii_serdes_shutdown(void)
+{
+	/*
+	 * shutdown SerDes hardware. SerDes hardware vendor published only
+	 * register addresses and their values. So had to use hardcoded
+	 * values below.
+	 */
+	clrbits_le32(0x0232bfe0, 3 << 29 | 3 << 13);
+	setbits_le32(0x02320228, 1 << 29);
+	clrbits_le32(0x0232bfe4, 3 << 29 | 3 << 13);
+	setbits_le32(0x02320428, 1 << 29);
+	clrbits_le32(0x0232bfe8, 3 << 29 | 3 << 13);
+	setbits_le32(0x02320628, 1 << 29);
+	clrbits_le32(0x0232bfec, 3 << 29 | 3 << 13);
+	setbits_le32(0x02320828, 1 << 29);
+
+	clrbits_le32(0x02320034, 3 << 29);
+	setbits_le32(0x02320010, 1 << 28);
+}
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index fbc37b2..8a13454 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -30,6 +30,11 @@
 #define serial_in(y)		readb(y)
 #endif
 
+#if defined(CONFIG_K2HK_EVM)
+#define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE   0
+#define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0))
+#endif
+
 #ifndef CONFIG_SYS_NS16550_IER
 #define CONFIG_SYS_NS16550_IER  0x00
 #endif /* CONFIG_SYS_NS16550_IER */
@@ -77,6 +82,9 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 	/* /16 is proper to hit 115200 with 48MHz */
 	serial_out(0, &com_port->mdr1);
 #endif /* CONFIG_OMAP */
+#if defined(CONFIG_K2HK_EVM)
+	serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC);
+#endif
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index e3fb321..28fb3a2 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -32,7 +32,27 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 	if (!ds)
 		return NULL;
 
-	ds->regs = (struct davinci_spi_regs *)CONFIG_SYS_SPI_BASE;
+	ds->slave.bus = bus;
+	ds->slave.cs = cs;
+
+	switch (bus) {
+	case SPI0_BUS:
+		ds->regs = (struct davinci_spi_regs *)SPI0_BASE;
+		break;
+#ifdef CONFIG_SYS_SPI1
+	case SPI1_BUS:
+		ds->regs = (struct davinci_spi_regs *)SPI0_BASE;
+		break;
+#endif
+#ifdef CONFIG_SYS_SPI2
+	case SPI2_BUS:
+		ds->regs = (struct davinci_spi_regs *)SPI2_BASE;
+		break;
+#endif
+	default: /* Invalid bus number */
+		return NULL;
+	}
+
 	ds->freq = max_hz;
 
 	return &ds->slave;
@@ -59,7 +79,7 @@ int spi_claim_bus(struct spi_slave *slave)
 	writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1);
 
 	/* CS, CLK, SIMO and SOMI are functional pins */
-	writel((SPIPC0_EN0FUN_MASK | SPIPC0_CLKFUN_MASK |
+	writel(((1 << slave->cs) | SPIPC0_CLKFUN_MASK |
 		SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0);
 
 	/* setup format */
@@ -264,7 +284,30 @@ out:
 
 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 {
-	return bus == 0 && cs == 0;
+	int ret = 0;
+
+	switch (bus) {
+	case SPI0_BUS:
+		if (cs < SPI0_NUM_CS)
+			ret = 1;
+		break;
+#ifdef CONFIG_SYS_SPI1
+	case SPI1_BUS:
+		if (cs < SPI1_NUM_CS)
+			ret = 1;
+		break;
+#endif
+#ifdef CONFIG_SYS_SPI2
+	case SPI2_BUS:
+		if (cs < SPI2_NUM_CS)
+			ret = 1;
+		break;
+#endif
+	default:
+		/* Invalid bus number. Do nothing */
+		break;
+	}
+	return ret;
 }
 
 void spi_cs_activate(struct spi_slave *slave)
diff --git a/drivers/spi/davinci_spi.h b/drivers/spi/davinci_spi.h
index 33f69b5..d4612d3 100644
--- a/drivers/spi/davinci_spi.h
+++ b/drivers/spi/davinci_spi.h
@@ -74,6 +74,39 @@ struct davinci_spi_regs {
 /* SPIDEF */
 #define SPIDEF_CSDEF0_MASK	BIT(0)
 
+#define SPI0_BUS		0
+#define SPI0_BASE		CONFIG_SYS_SPI_BASE
+/*
+ * Define default SPI0_NUM_CS as 1 for existing platforms that uses this
+ * driver. Platform can configure number of CS using CONFIG_SYS_SPI0_NUM_CS
+ * if more than one CS is supported and by defining CONFIG_SYS_SPI0.
+ */
+#ifndef CONFIG_SYS_SPI0
+#define SPI0_NUM_CS		1
+#else
+#define SPI0_NUM_CS		CONFIG_SYS_SPI0_NUM_CS
+#endif
+
+/*
+ * define CONFIG_SYS_SPI1 when platform has spi-1 device (bus #1) and
+ * CONFIG_SYS_SPI1_NUM_CS defines number of CS on this bus
+ */
+#ifdef CONFIG_SYS_SPI1
+#define SPI1_BUS		1
+#define SPI1_NUM_CS		CONFIG_SYS_SPI1_NUM_CS
+#define SPI1_BASE		CONFIG_SYS_SPI1_BASE
+#endif
+
+/*
+ * define CONFIG_SYS_SPI2 when platform has spi-2 device (bus #2) and
+ * CONFIG_SYS_SPI2_NUM_CS defines number of CS on this bus
+ */
+#ifdef CONFIG_SYS_SPI2
+#define SPI2_BUS		2
+#define SPI2_NUM_CS		CONFIG_SYS_SPI2_NUM_CS
+#define SPI2_BASE		CONFIG_SYS_SPI2_BASE
+#endif
+
 struct davinci_spi_slave {
 	struct spi_slave slave;
 	struct davinci_spi_regs *regs;
diff --git a/drivers/spi/tegra20_sflash.c b/drivers/spi/tegra20_sflash.c
index 603c024..b5d561b 100644
--- a/drivers/spi/tegra20_sflash.c
+++ b/drivers/spi/tegra20_sflash.c
@@ -208,9 +208,9 @@ int tegra20_spi_claim_bus(struct spi_slave *slave)
 	 * SPI pins on Tegra20 are muxed - change pinmux later due to UART
 	 * issue.
 	 */
-	pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
-	pinmux_tristate_disable(PINGRP_LSPI);
-	pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
+	pinmux_set_func(PMUX_PINGRP_GMD, PMUX_FUNC_SFLASH);
+	pinmux_tristate_disable(PMUX_PINGRP_LSPI);
+	pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_SFLASH);
 
 	return 0;
 }
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index dfa5d0c..c5d2245 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -314,6 +314,9 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 			qslave->cmd |= QSPI_RD_SNGL;
 			debug("rx cmd %08x dc %08x\n",
 			      qslave->cmd, qslave->dc);
+			#ifdef CONFIG_DRA7XX
+				udelay(500);
+			#endif
 			writel(qslave->cmd, &qslave->base->cmd);
 			status = readl(&qslave->base->status);
 			timeout = QSPI_TIMEOUT;
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 0b42aa5..38db18e 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -13,7 +13,6 @@
 #include <asm/arch/clock.h>
 #include <asm/arch-tegra/usb.h>
 #include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch/usb.h>
 #include <usb.h>
 #include <usb/ulpi.h>
 #include <libfdt.h>
@@ -461,6 +460,9 @@ static int init_utmi_usb_controller(struct fdt_usb *config)
 		if (config->periph_id == PERIPH_ID_USBD)
 			clrbits_le32(&clkrst->crc_utmip_pll_cfg2,
 				     UTMIP_FORCE_PD_SAMP_A_POWERDOWN);
+		if (config->periph_id == PERIPH_ID_USB2)
+			clrbits_le32(&clkrst->crc_utmip_pll_cfg2,
+				     UTMIP_FORCE_PD_SAMP_B_POWERDOWN);
 		if (config->periph_id == PERIPH_ID_USB3)
 			clrbits_le32(&clkrst->crc_utmip_pll_cfg2,
 				     UTMIP_FORCE_PD_SAMP_C_POWERDOWN);
@@ -483,9 +485,21 @@ static int init_utmi_usb_controller(struct fdt_usb *config)
 	clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1);
 
 	/* Select UTMI parallel interface */
-	clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
+#if defined(CONFIG_TEGRA20)
+	if (config->periph_id == PERIPH_ID_USBD) {
+		clrsetbits_le32(&usbctlr->port_sc1, PTS1_MASK,
+				PTS_UTMI << PTS1_SHIFT);
+		clrbits_le32(&usbctlr->port_sc1, STS1);
+	} else {
+		clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
+				PTS_UTMI << PTS_SHIFT);
+		clrbits_le32(&usbctlr->port_sc1, STS);
+	}
+#else
+	clrsetbits_le32(&usbctlr->hostpc1_devlc, PTS_MASK,
 			PTS_UTMI << PTS_SHIFT);
-	clrbits_le32(&usbctlr->port_sc1, STS);
+	clrbits_le32(&usbctlr->hostpc1_devlc, STS);
+#endif
 
 	/* Deassert power down state */
 	clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN |
@@ -543,7 +557,13 @@ static int init_ulpi_usb_controller(struct fdt_usb *config)
 			ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP);
 
 	/* Select ULPI parallel interface */
-	clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, PTS_ULPI << PTS_SHIFT);
+#if defined(CONFIG_TEGRA20)
+	clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
+			PTS_ULPI << PTS_SHIFT);
+#else
+	clrsetbits_le32(&usbctlr->hostpc1_devlc, PTS_MASK,
+			PTS_ULPI << PTS_SHIFT);
+#endif
 
 	/* enable ULPI transceiver */
 	setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB);
diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
index c047e6e..57cb007 100644
--- a/drivers/video/tegra.c
+++ b/drivers/video/tegra.c
@@ -229,8 +229,8 @@ static int handle_stage(const void *blob)
 		break;
 	case STAGE_PWM:
 		/* Enable PWM at 15/16 high, 32768 Hz with divider 1 */
-		pinmux_set_func(PINGRP_GPU, PMUX_FUNC_PWM);
-		pinmux_tristate_disable(PINGRP_GPU);
+		pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_PWM);
+		pinmux_tristate_disable(PMUX_PINGRP_GPU);
 
 		pwm_enable(config.pwm_channel, 32768, 0xdf, 1);
 		break;