PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

7 files changed, 15 insertions, 14 deletions

diff --git a/drivers/mmc/pxa_mmc.c b/drivers/mmc/pxa_mmc.c
index 3c2905c..2b58a98 100644
--- a/drivers/mmc/pxa_mmc.c
+++ b/drivers/mmc/pxa_mmc.c
@@ -129,7 +129,7 @@ mmc_block_read(uchar * dst, uint32_t src, int len)
 	writel(~MMC_I_MASK_RXFIFO_RD_REQ, MMC_I_MASK);
 	while (len) {
 		if (readl(MMC_I_REG) & MMC_I_REG_RXFIFO_RD_REQ) {
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
 			int i;
 			for (i = min(len, 32); i; i--) {
 				*dst++ = readb(MMC_RXFIFO);
@@ -560,7 +560,8 @@ mmc_legacy_init(int verbose)
 	/* Reset device interface type */
 	mmc_dev.if_type = IF_TYPE_UNKNOWN;
 
-#if defined (CONFIG_LUBBOCK) || (defined (CONFIG_GUMSTIX) && !defined(CONFIG_PXA27X))
+#if defined(CONFIG_LUBBOCK) || \
+	(defined(CONFIG_GUMSTIX) && !defined(CONFIG_CPU_PXA27X))
 	set_GPIO_mode(GPIO6_MMCCLK_MD);
 	set_GPIO_mode(GPIO8_MMCCS0_MD);
 #endif
@@ -633,7 +634,7 @@ mmc_legacy_init(int verbose)
 	writel(0, MMC_CLKRT);		/* 20 MHz */
 	resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1);
 
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
 	if (IF_TYPE_SD == mmc_dev.if_type) {
 		resp = mmc_cmd(MMC_CMD_APP_CMD, rca, 0, MMC_CMDAT_R1);
 		resp = mmc_cmd(SD_CMD_APP_SET_BUS_WIDTH, 0, 2, MMC_CMDAT_R1);
diff --git a/drivers/mmc/pxa_mmc_gen.c b/drivers/mmc/pxa_mmc_gen.c
index 28e37b4..4a7c67a 100644
--- a/drivers/mmc/pxa_mmc_gen.c
+++ b/drivers/mmc/pxa_mmc_gen.c
@@ -30,12 +30,12 @@
 #include <asm/io.h>
 
 /* PXAMMC Generic default config for various CPUs */
-#if defined(CONFIG_PXA250)
+#if defined(CONFIG_CPU_PXA25X)
 #define PXAMMC_FIFO_SIZE	1
 #define PXAMMC_MIN_SPEED	312500
 #define PXAMMC_MAX_SPEED	20000000
 #define PXAMMC_HOST_CAPS	(0)
-#elif defined(CONFIG_PXA27X)
+#elif defined(CONFIG_CPU_PXA27X)
 #define PXAMMC_CRC_SKIP
 #define PXAMMC_FIFO_SIZE	32
 #define PXAMMC_MIN_SPEED	304000
diff --git a/drivers/net/lan91c96.h b/drivers/net/lan91c96.h
index 6fbb0e3..bef1522 100644
--- a/drivers/net/lan91c96.h
+++ b/drivers/net/lan91c96.h
@@ -68,7 +68,7 @@ typedef unsigned long int		dword;
 
 #define	SMC_IO_EXTENT	16
 
-#ifdef CONFIG_PXA250
+#ifdef CONFIG_CPU_PXA25X
 
 #ifdef	CONFIG_LUBBOCK
 #define	SMC_IO_SHIFT	2
@@ -146,7 +146,7 @@ typedef unsigned long int		dword;
 					};  \
 				})
 
-#else /* if not CONFIG_PXA250 */
+#else /* if not CONFIG_CPU_PXA25X */
 
 /*
  * We have only 16 Bit PCMCIA access on Socket 0
diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h
index 895c749..d70c66f 100644
--- a/drivers/net/smc91111.h
+++ b/drivers/net/smc91111.h
@@ -78,7 +78,7 @@ struct smc91111_priv{
 
 #define	SMC_IO_EXTENT	16
 
-#ifdef CONFIG_PXA250
+#ifdef CONFIG_CPU_PXA25X
 
 #ifdef CONFIG_XSENGINE
 #define	SMC_inl(a,r)	(*((volatile dword *)((a)->iobase+((r)<<1))))
@@ -180,7 +180,7 @@ struct smc91111_priv{
 					};  \
 				})
 
-#elif defined(CONFIG_LEON)	/* if not CONFIG_PXA250 */
+#elif defined(CONFIG_LEON)	/* if not CONFIG_CPU_PXA25X */
 
 #define SMC_LEON_SWAP16(_x_) ({ word _x = (_x_); ((_x << 8) | (_x >> 8)); })
 
@@ -249,7 +249,7 @@ struct smc91111_priv{
 					};  \
 				}while(0)
 
-#else				/* if not CONFIG_PXA250 and not CONFIG_LEON */
+#else			/* if not CONFIG_CPU_PXA25X and not CONFIG_LEON */
 
 #ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */
 /*
diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c
index 84bb17c..a9976d7 100644
--- a/drivers/serial/serial_pxa.c
+++ b/drivers/serial/serial_pxa.c
@@ -49,7 +49,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define	BTUART_INDEX	0
 #define	FFUART_INDEX	1
 #define	STUART_INDEX	2
-#elif	CONFIG_PXA250
+#elif	CONFIG_CPU_PXA25X
 #define	UART_CLK_BASE	(1 << 4)	/* HWUART */
 #define	UART_CLK_REG	CKEN
 #define	HWUART_INDEX	0
@@ -68,7 +68,7 @@ DECLARE_GLOBAL_DATA_PTR;
  * Only PXA250 has HWUART, to avoid poluting the code with more macros,
  * artificially introduce this.
  */
-#ifndef	CONFIG_PXA250
+#ifndef	CONFIG_CPU_PXA25X
 #define	HWUART_INDEX	0xff
 #endif
 
diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h
index 14961c1..e449cd7 100644
--- a/drivers/serial/usbtty.h
+++ b/drivers/serial/usbtty.h
@@ -31,7 +31,7 @@
 #include <usb/omap1510_udc.h>
 #elif defined(CONFIG_MUSB_UDC)
 #include <usb/musb_udc.h>
-#elif defined(CONFIG_PXA27X)
+#elif defined(CONFIG_CPU_PXA27X)
 #include <usb/pxa27x_udc.h>
 #elif defined(CONFIG_SPEAR3XX) || defined(CONFIG_SPEAR600)
 #include <usb/spr_udc.h>
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 7d5b504..5e72713 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -37,7 +37,7 @@ COBJS-y += ep0.o
 COBJS-$(CONFIG_OMAP1510) += omap1510_udc.o
 COBJS-$(CONFIG_OMAP1610) += omap1510_udc.o
 COBJS-$(CONFIG_MPC885_FAMILY) += mpc8xx_udc.o
-COBJS-$(CONFIG_PXA27X) += pxa27x_udc.o
+COBJS-$(CONFIG_CPU_PXA27X) += pxa27x_udc.o
 COBJS-$(CONFIG_SPEARUDC) += spr_udc.o
 endif
 endif