Merge branch 'master' of git://git.denx.de/u-boot-ti

8 files changed, 42 insertions, 35 deletions

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 44a4feb..8436bc7 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1277,6 +1277,11 @@ block_dev_desc_t *mmc_get_dev(int dev)
 }
 #endif
 
+/* board-specific MMC power initializations. */
+__weak void board_mmc_power_init(void)
+{
+}
+
 int mmc_start_init(struct mmc *mmc)
 {
 	int err;
@@ -1293,6 +1298,8 @@ int mmc_start_init(struct mmc *mmc)
 	if (mmc->has_init)
 		return 0;
 
+	board_mmc_power_init();
+
 	/* made sure it's not NULL earlier */
 	err = mmc->cfg->ops->init(mmc);
 
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index ffb5284..c880ced 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -135,12 +135,7 @@ static unsigned char mmc_board_init(struct mmc *mmc)
 	pbias_lite = readl(&t2_base->pbias_lite);
 	pbias_lite &= ~(PBIASLITEPWRDNZ1 | PBIASLITEPWRDNZ0);
 	writel(pbias_lite, &t2_base->pbias_lite);
-#endif
-#if defined(CONFIG_TWL4030_POWER)
-	twl4030_power_mmc_init();
-	mdelay(100);	/* ramp-up delay from Linux code */
-#endif
-#if defined(CONFIG_OMAP34XX)
+
 	writel(pbias_lite | PBIASLITEPWRDNZ1 |
 		PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
 		&t2_base->pbias_lite);
@@ -663,7 +658,8 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
 	case 1:
 		priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE;
 #if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
-     defined(CONFIG_DRA7XX)) && defined(CONFIG_HSMMC2_8BIT)
+     defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)) && \
+		defined(CONFIG_HSMMC2_8BIT)
 		/* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */
 		host_caps_val |= MMC_MODE_8BIT;
 #endif
@@ -672,7 +668,7 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
 #ifdef OMAP_HSMMC3_BASE
 	case 2:
 		priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE;
-#if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT)
+#if (defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)) && defined(CONFIG_HSMMC3_8BIT)
 		/* Enable 8-bit interface for eMMC on DRA7XX */
 		host_caps_val |= MMC_MODE_8BIT;
 #endif
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 40d6705..93829a4 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -73,14 +73,11 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd,
 		writeb(cmd, this->IO_ADDR_W);
 }
 
-#ifdef CONFIG_SPL_BUILD
 /* Check wait pin as dev ready indicator */
-static int omap_spl_dev_ready(struct mtd_info *mtd)
+static int omap_dev_ready(struct mtd_info *mtd)
 {
 	return gpmc_cfg->status & (1 << 8);
 }
-#endif
-
 
 /*
  * gen_true_ecc - This function will generate true ECC value, which
@@ -887,7 +884,9 @@ int board_nand_init(struct nand_chip *nand)
 		nand->read_buf = nand_read_buf16;
 	else
 		nand->read_buf = nand_read_buf;
-	nand->dev_ready = omap_spl_dev_ready;
 #endif
+
+	nand->dev_ready = omap_dev_ready;
+
 	return 0;
 }
diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c
index cfbc9dc..6430fe0 100644
--- a/drivers/power/palmas.c
+++ b/drivers/power/palmas.c
@@ -27,7 +27,7 @@ int palmas_mmc1_poweron_ldo(void)
 {
 	u8 val = 0;
 
-#if defined(CONFIG_DRA7XX)
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 	/*
 	 * Currently valid for the dra7xx_evm board:
 	 * Set TPS659038 LDO1 to 3.0 V
diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
index e578ae6..7f1fdd1 100644
--- a/drivers/power/twl4030.c
+++ b/drivers/power/twl4030.c
@@ -91,17 +91,23 @@ void twl4030_power_init(void)
 				TWL4030_PM_RECEIVER_DEV_GRP_P1);
 }
 
-void twl4030_power_mmc_init(void)
+void twl4030_power_mmc_init(int dev_index)
 {
-	/* Set VMMC1 to 3.15 Volts */
-	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
-				TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
-				TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
-				TWL4030_PM_RECEIVER_DEV_GRP_P1);
+	if (dev_index == 0) {
+		/* Set VMMC1 to 3.15 Volts */
+		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
+					TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
+					TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
+					TWL4030_PM_RECEIVER_DEV_GRP_P1);
 
-	/* Set VMMC2 to 3.15 Volts */
-	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
-				TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
-				TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
-				TWL4030_PM_RECEIVER_DEV_GRP_P1);
+		mdelay(100);	/* ramp-up delay from Linux code */
+	} else if (dev_index == 1) {
+		/* Set VMMC2 to 3.15 Volts */
+		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
+					TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
+					TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
+					TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+		mdelay(100);	/* ramp-up delay from Linux code */
+	}
 }
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 8f05191..af5beba 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -132,11 +132,12 @@ static void NS16550_setbrg(NS16550_t com_port, int baud_divisor)
 
 void NS16550_init(NS16550_t com_port, int baud_divisor)
 {
-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX))
+#if (defined(CONFIG_SPL_BUILD) && \
+		(defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX)))
 	/*
-	 * On some OMAP3 devices when UART3 is configured for boot mode before
-	 * SPL starts only THRE bit is set. We have to empty the transmitter
-	 * before initialization starts.
+	 * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode
+	 * before SPL starts only THRE bit is set. We have to empty the
+	 * transmitter before initialization starts.
 	 */
 	if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE))
 	     == UART_LSR_THRE) {
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index fd7fea8..857b604 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -102,7 +102,7 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
 	struct spi_slave *slave = &qslave->slave;
 	u32 memval = 0;
 
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 	slave->memory_map = (void *)MMAP_START_ADDR_DRA;
 #else
 	slave->memory_map = (void *)MMAP_START_ADDR_AM43x;
@@ -244,7 +244,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	uint status;
 	int timeout;
 
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 	int val;
 #endif
 
@@ -254,7 +254,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	/* Setup mmap flags */
 	if (flags & SPI_XFER_MMAP) {
 		writel(MM_SWITCH, &qslave->base->memswitch);
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 		val = readl(CORE_CTRL_IO);
 		val |= MEM_CS;
 		writel(val, CORE_CTRL_IO);
@@ -262,7 +262,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 		return 0;
 	} else if (flags & SPI_XFER_MMAP_END) {
 		writel(~MM_SWITCH, &qslave->base->memswitch);
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 		val = readl(CORE_CTRL_IO);
 		val &= MEM_CS_UNSELECT;
 		writel(val, CORE_CTRL_IO);
diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c
index f78d532..52a3664 100644
--- a/drivers/usb/phy/omap_usb_phy.c
+++ b/drivers/usb/phy/omap_usb_phy.c
@@ -118,7 +118,6 @@ void usb_phy_power(int on)
 void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs)
 {
 	omap_usb_dpll_lock(phy_regs);
-
 	usb3_phy_partial_powerup(phy_regs);
 	/*
 	 * Give enough time for the PHY to partially power-up before
@@ -126,7 +125,6 @@ void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs)
 	 * team.
 	 */
 	mdelay(100);
-	usb3_phy_power(1);
 }
 
 static void omap_enable_usb3_phy(struct omap_xhci *omap)