microblaze: add Emaclite ethernet driver

1 files changed, 351 insertions, 0 deletions

diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
new file mode 100644
index 0000000..9ba4096
--- /dev/null
+++ b/drivers/net/xilinx_emaclite.c
@@ -0,0 +1,351 @@
+/******************************************************************************
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+ * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+ * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE.
+ *
+ * (C) Copyright 2007-2008 Michal Simek
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * (c) Copyright 2003 Xilinx Inc.
+ * All rights reserved.
+ *
+ ******************************************************************************/
+
+#include <common.h>
+#include <net.h>
+#include <config.h>
+#include <asm/io.h>
+
+#undef DEBUG
+
+#define ENET_MAX_MTU		PKTSIZE
+#define ENET_MAX_MTU_ALIGNED	PKTSIZE_ALIGN
+#define ENET_ADDR_LENGTH	6
+
+/* EmacLite constants */
+#define XEL_BUFFER_OFFSET	0x0800	/* Next buffer's offset */
+#define XEL_TPLR_OFFSET		0x07F4	/* Tx packet length */
+#define XEL_TSR_OFFSET		0x07FC	/* Tx status */
+#define XEL_RSR_OFFSET		0x17FC	/* Rx status */
+#define XEL_RXBUFF_OFFSET	0x1000	/* Receive Buffer */
+
+/* Xmit complete */
+#define XEL_TSR_XMIT_BUSY_MASK		0x00000001UL
+/* Xmit interrupt enable bit */
+#define XEL_TSR_XMIT_IE_MASK		0x00000008UL
+/* Buffer is active, SW bit only */
+#define XEL_TSR_XMIT_ACTIVE_MASK	0x80000000UL
+/* Program the MAC address */
+#define XEL_TSR_PROGRAM_MASK		0x00000002UL
+/* define for programming the MAC address into the EMAC Lite */
+#define XEL_TSR_PROG_MAC_ADDR	(XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
+
+/* Transmit packet length upper byte */
+#define XEL_TPLR_LENGTH_MASK_HI		0x0000FF00UL
+/* Transmit packet length lower byte */
+#define XEL_TPLR_LENGTH_MASK_LO		0x000000FFUL
+
+/* Recv complete */
+#define XEL_RSR_RECV_DONE_MASK		0x00000001UL
+/* Recv interrupt enable bit */
+#define XEL_RSR_RECV_IE_MASK		0x00000008UL
+
+typedef struct {
+	unsigned int baseaddress;	/* Base address for device (IPIF) */
+	unsigned int nexttxbuffertouse;	/* Next TX buffer to write to */
+	unsigned int nextrxbuffertouse;	/* Next RX buffer to read from */
+	unsigned char deviceid;		/* Unique ID of device - for future */
+} xemaclite;
+
+static xemaclite emaclite;
+
+static char etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
+
+/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
+#ifdef CFG_ENV_IS_NOWHERE
+static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
+#else
+static u8 emacaddr[ENET_ADDR_LENGTH];
+#endif
+
+void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
+{
+	unsigned int i;
+	u32 alignbuffer;
+	u32 *to32ptr;
+	u32 *from32ptr;
+	u8 *to8ptr;
+	u8 *from8ptr;
+
+	from32ptr = (u32 *) srcptr;
+
+	/* Word aligned buffer, no correction needed. */
+	to32ptr = (u32 *) destptr;
+	while (bytecount > 3) {
+		*to32ptr++ = *from32ptr++;
+		bytecount -= 4;
+	}
+	to8ptr = (u8 *) to32ptr;
+
+	alignbuffer = *from32ptr++;
+	from8ptr = (u8 *) & alignbuffer;
+
+	for (i = 0; i < bytecount; i++) {
+		*to8ptr++ = *from8ptr++;
+	}
+}
+
+void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
+{
+	unsigned i;
+	u32 alignbuffer;
+	u32 *to32ptr = (u32 *) destptr;
+	u32 *from32ptr;
+	u8 *to8ptr;
+	u8 *from8ptr;
+
+	from32ptr = (u32 *) srcptr;
+	while (bytecount > 3) {
+
+		*to32ptr++ = *from32ptr++;
+		bytecount -= 4;
+	}
+
+	alignbuffer = 0;
+	to8ptr = (u8 *) & alignbuffer;
+	from8ptr = (u8 *) from32ptr;
+
+	for (i = 0; i < bytecount; i++) {
+		*to8ptr++ = *from8ptr++;
+	}
+
+	*to32ptr++ = alignbuffer;
+}
+
+void eth_halt (void)
+{
+	debug ("eth_halt\n");
+}
+
+int eth_init (bd_t * bis)
+{
+	debug ("EmacLite Initialization Started\n");
+	memset (&emaclite, 0, sizeof (xemaclite));
+	emaclite.baseaddress = XILINX_EMACLITE_BASEADDR;
+
+	if (!getenv("ethaddr")) {
+		memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH);
+	}
+
+/*
+ * TX - TX_PING & TX_PONG initialization
+ */
+	/* Restart PING TX */
+	out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
+	/* Copy MAC address */
+	xemaclite_alignedwrite (bis->bi_enetaddr,
+		emaclite.baseaddress, ENET_ADDR_LENGTH);
+	/* Set the length */
+	out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
+	/* Update the MAC address in the EMAC Lite */
+	out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
+	/* Wait for EMAC Lite to finish with the MAC address update */
+	while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET) &
+		XEL_TSR_PROG_MAC_ADDR) != 0) ;
+
+#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+	/* The same operation with PONG TX */
+	out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
+	xemaclite_alignedwrite (bis->bi_enetaddr, emaclite.baseaddress +
+		XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
+	out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
+	out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
+		XEL_TSR_PROG_MAC_ADDR);
+	while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
+		XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ;
+#endif
+
+/*
+ * RX - RX_PING & RX_PONG initialization
+ */
+	/* Write out the value to flush the RX buffer */
+	out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
+#ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
+	out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
+		XEL_RSR_RECV_IE_MASK);
+#endif
+
+	debug ("EmacLite Initialization complete\n");
+	return 0;
+}
+
+int xemaclite_txbufferavailable (xemaclite * instanceptr)
+{
+	u32 reg;
+	u32 txpingbusy;
+	u32 txpongbusy;
+	/*
+	 * Read the other buffer register
+	 * and determine if the other buffer is available
+	 */
+	reg = in_be32 (instanceptr->baseaddress +
+			instanceptr->nexttxbuffertouse + 0);
+	txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
+			XEL_TSR_XMIT_BUSY_MASK);
+
+	reg = in_be32 (instanceptr->baseaddress +
+			(instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
+	txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
+			XEL_TSR_XMIT_BUSY_MASK);
+
+	return (!(txpingbusy && txpongbusy));
+}
+
+int eth_send (volatile void *ptr, int len) {
+
+	unsigned int reg;
+	unsigned int baseaddress;
+
+	unsigned maxtry = 1000;
+
+	if (len > ENET_MAX_MTU)
+		len = ENET_MAX_MTU;
+
+	while (!xemaclite_txbufferavailable (&emaclite) && maxtry) {
+		udelay (10);
+		maxtry--;
+	}
+
+	if (!maxtry) {
+		printf ("Error: Timeout waiting for ethernet TX buffer\n");
+		/* Restart PING TX */
+		out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
+#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+		out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
+		XEL_BUFFER_OFFSET, 0);
+#endif
+		return 0;
+	}
+
+	/* Determine the expected TX buffer address */
+	baseaddress = (emaclite.baseaddress + emaclite.nexttxbuffertouse);
+
+	/* Determine if the expected buffer address is empty */
+	reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+	if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
+		&& ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
+			& XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
+
+#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+		emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
+#endif
+		debug ("Send packet from 0x%x\n", baseaddress);
+		/* Write the frame to the buffer */
+		xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
+		out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
+			(XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
+		reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+		reg |= XEL_TSR_XMIT_BUSY_MASK;
+		if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
+			reg |= XEL_TSR_XMIT_ACTIVE_MASK;
+		}
+		out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
+		return 1;
+	}
+#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+	/* Switch to second buffer */
+	baseaddress ^= XEL_BUFFER_OFFSET;
+	/* Determine if the expected buffer address is empty */
+	reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+	if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
+		&& ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
+			& XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
+		debug ("Send packet from 0x%x\n", baseaddress);
+		/* Write the frame to the buffer */
+		xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
+		out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
+			(XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
+		reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+		reg |= XEL_TSR_XMIT_BUSY_MASK;
+		if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
+			reg |= XEL_TSR_XMIT_ACTIVE_MASK;
+		}
+		out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
+		return 1;
+	}
+#endif
+	puts ("Error while sending frame\n");
+	return 0;
+}
+
+int eth_rx (void)
+{
+	unsigned int length;
+	unsigned int reg;
+	unsigned int baseaddress;
+
+	baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
+	reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+	debug ("Testing data at address 0x%x\n", baseaddress);
+	if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
+#ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
+		emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
+#endif
+	} else {
+#ifndef CONFIG_XILINX_EMACLITE_RX_PING_PONG
+		debug ("No data was available - address 0x%x\n", baseaddress);
+		return 0;
+#else
+		baseaddress ^= XEL_BUFFER_OFFSET;
+		reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+		if ((reg & XEL_RSR_RECV_DONE_MASK) !=
+					XEL_RSR_RECV_DONE_MASK) {
+			debug ("No data was available - address 0x%x\n",
+					baseaddress);
+			return 0;
+		}
+#endif
+	}
+	/* Get the length of the frame that arrived */
+	switch(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC)) &
+			0xFFFF0000 ) >> 16) {
+		case 0x806:
+			length = 42 + 20; /* FIXME size of ARP */
+			debug ("ARP Packet\n");
+			break;
+		case 0x800:
+			length = 14 + 14 +
+			(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10)) &
+			0xFFFF0000) >> 16); /* FIXME size of IP packet */
+			debug ("IP Packet\n");
+			break;
+		default:
+			debug ("Other Packet\n");
+			length = ENET_MAX_MTU;
+			break;
+	}
+
+	xemaclite_alignedread ((u32 *) (baseaddress + XEL_RXBUFF_OFFSET),
+			etherrxbuff, length);
+
+	/* Acknowledge the frame */
+	reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+	reg &= ~XEL_RSR_RECV_DONE_MASK;
+	out_be32 (baseaddress + XEL_RSR_OFFSET, reg);
+
+	debug ("Packet receive from 0x%x, length %dB\n", baseaddress, length);
+	NetReceive ((uchar *) etherrxbuff, length);
+	return 1;
+
+}