* Code cleanup

* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

5 files changed, 917 insertions, 8 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 11738b9..afca70e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -29,23 +29,23 @@ LIB	= libdrivers.a
 
 OBJS	= 3c589.o 5701rls.o ali512x.o \
 	  bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
-	  cs8900.o ct69000.o dataflash.o dc2114x.o	    \
+	  cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
 	  e1000.o eepro100.o \
 	  i8042.o i82365.o inca-ip_sw.o keyboard.o \
 	  lan91c96.o natsemi.o netarm_eth.o \
-	  ns16550.o ns8382x.o ns87308.o \
+	  ns16550.o ns8382x.o ns87308.o omap1510_i2c.o \
 	  pci.o pci_auto.o pci_indirect.o \
 	  pcnet.o plb2800_eth.o \
 	  ps2ser.o ps2mult.o pc_keyb.o \
 	  rtl8019.o rtl8139.o rtl8169.o \
 	  s3c24x0_i2c.o s3c4510b_eth.o s3c4510b_uart.o \
 	  sed13806.o sed156x.o \
-	  serial.o serial_max3100.o serial_pl010.o serial_pl011.o \
-	  serial_xuartlite.o sl811_usb.o \
-	  smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
-	  ti_pci1410a.o tigon3.o w83c553f.o omap1510_i2c.o \
+	  serial.o serial_imx.o serial_max3100.o \
+	  serial_pl010.o serial_pl011.o serial_xuartlite.o \
+	  sl811_usb.o smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
+	  ti_pci1410a.o tigon3.o \
 	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
-	  videomodes.o
+	  videomodes.o w83c553f.o
 
 all:	$(LIB)
 
diff --git a/drivers/cfb_console.c b/drivers/cfb_console.c
index 6a8df79..3d26ae2 100644
--- a/drivers/cfb_console.c
+++ b/drivers/cfb_console.c
@@ -1169,7 +1169,6 @@ int drv_video_init (void)
 {
 	int skip_dev_init;
 	device_t console_dev;
-	char *penv;
 
 	skip_dev_init = 0;
 
diff --git a/drivers/dm9000x.c b/drivers/dm9000x.c
new file mode 100644
index 0000000..0e475d4
--- /dev/null
+++ b/drivers/dm9000x.c
@@ -0,0 +1,590 @@
+/*
+  dm9000.c: Version 1.2 12/15/2003
+
+	A Davicom DM9000 ISA NIC fast Ethernet driver for Linux.
+	Copyright (C) 1997  Sten Wang
+
+	This program is free software; you can redistribute it and/or
+	modify it under the terms of the GNU General Public License
+	as published by the Free Software Foundation; either version 2
+	of the License, or (at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+  (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
+
+V0.11	06/20/2001	REG_0A bit3=1, default enable BP with DA match
+	06/22/2001 	Support DM9801 progrmming
+	 	 	E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
+		 	E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
+     		R17 = (R17 & 0xfff0) | NF + 3
+		 	E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
+     		R17 = (R17 & 0xfff0) | NF
+
+v1.00               	modify by simon 2001.9.5
+	                change for kernel 2.4.x
+
+v1.1   11/09/2001      	fix force mode bug
+
+v1.2   03/18/2003       Weilun Huang <weilun_huang@davicom.com.tw>:
+			Fixed phy reset.
+			Added tx/rx 32 bit mode.
+			Cleaned up for kernel merge.
+
+--------------------------------------
+
+       12/15/2003       Initial port to u-boot by Sascha Hauer <saschahauer@web.de>
+
+TODO: Homerun NIC and longrun NIC are not functional, only internal at the
+      moment.
+*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_DRIVER_DM9000
+
+#include "dm9000x.h"
+
+/* Board/System/Debug information/definition ---------------- */
+
+#define DM9801_NOISE_FLOOR	0x08
+#define DM9802_NOISE_FLOOR	0x05
+
+/* #define CONFIG_DM9000_DEBUG */
+
+#ifdef CONFIG_DM9000_DEBUG
+#define DM9000_DBG(fmt,args...) printf(fmt ,##args)
+#else				/*  */
+#define DM9000_DBG(fmt,args...)
+#endif				/*  */
+enum DM9000_PHY_mode { DM9000_10MHD = 0, DM9000_100MHD =
+	    1, DM9000_10MFD = 4, DM9000_100MFD = 5, DM9000_AUTO =
+	    8, DM9000_1M_HPNA = 0x10
+};
+enum DM9000_NIC_TYPE { FASTETHER_NIC = 0, HOMERUN_NIC = 1, LONGRUN_NIC = 2
+};
+
+/* Structure/enum declaration ------------------------------- */
+typedef struct board_info {
+	u32 runt_length_counter;	/* counter: RX length < 64byte */
+	u32 long_length_counter;	/* counter: RX length > 1514byte */
+	u32 reset_counter;	/* counter: RESET */
+	u32 reset_tx_timeout;	/* RESET caused by TX Timeout */
+	u32 reset_rx_status;	/* RESET caused by RX Statsus wrong */
+	u16 tx_pkt_cnt;
+	u16 queue_start_addr;
+	u16 dbug_cnt;
+	u8 phy_addr;
+	u8 device_wait_reset;	/* device state */
+	u8 nic_type;		/* NIC type */
+	unsigned char srom[128];
+} board_info_t;
+board_info_t dmfe_info;
+
+/* For module input parameter */
+static int media_mode = DM9000_AUTO;
+static u8 nfloor = 0;
+
+/* function declaration ------------------------------------- */
+int eth_init(bd_t * bd);
+int eth_send(volatile void *, int);
+int eth_rx(void);
+void eth_halt(void);
+static int dm9000_probe(void);
+static u16 phy_read(int);
+static void phy_write(int, u16);
+static u16 read_srom_word(int);
+static u8 DM9000_ior(int);
+static void DM9000_iow(int reg, u8 value);
+
+/* DM9000 network board routine ---------------------------- */
+
+#define DM9000_outb(d,r) ( *(volatile u8 *)r = d )
+#define DM9000_outw(d,r) ( *(volatile u16 *)r = d )
+#define DM9000_outl(d,r) ( *(volatile u32 *)r = d )
+#define DM9000_inb(r) (*(volatile u8 *)r)
+#define DM9000_inw(r) (*(volatile u16 *)r)
+#define DM9000_inl(r) (*(volatile u32 *)r)
+
+#ifdef CONFIG_DM9000_DEBUG
+static void
+dump_regs(void)
+{
+	DM9000_DBG("\n");
+	DM9000_DBG("NCR   (0x00): %02x\n", DM9000_ior(0));
+	DM9000_DBG("NSR   (0x01): %02x\n", DM9000_ior(1));
+	DM9000_DBG("TCR   (0x02): %02x\n", DM9000_ior(2));
+	DM9000_DBG("TSRI  (0x03): %02x\n", DM9000_ior(3));
+	DM9000_DBG("TSRII (0x04): %02x\n", DM9000_ior(4));
+	DM9000_DBG("RCR   (0x05): %02x\n", DM9000_ior(5));
+	DM9000_DBG("RSR   (0x06): %02x\n", DM9000_ior(6));
+	DM9000_DBG("ISR   (0xFE): %02x\n", DM9000_ior(ISR));
+	DM9000_DBG("\n");
+}
+#endif				/*  */
+
+/*
+  Search DM9000 board, allocate space and register it
+*/
+int
+dm9000_probe(void)
+{
+	u32 id_val;
+	id_val = DM9000_ior(DM9000_VIDL);
+	id_val |= DM9000_ior(DM9000_VIDH) << 8;
+	id_val |= DM9000_ior(DM9000_PIDL) << 16;
+	id_val |= DM9000_ior(DM9000_PIDH) << 24;
+	if (id_val == DM9000_ID) {
+		printf("dm9000 i/o: 0x%x, id: 0x%x \n", CONFIG_DM9000_BASE,
+		       id_val);
+		return 0;
+	} else {
+		printf("dm9000 not found at 0x%08x id: 0x%08x\n",
+		       CONFIG_DM9000_BASE, id_val);
+		return -1;
+	}
+}
+
+/* Set PHY operationg mode
+*/
+static void
+set_PHY_mode(void)
+{
+	u16 phy_reg4 = 0x01e1, phy_reg0 = 0x1000;
+	if (!(media_mode & DM9000_AUTO)) {
+		switch (media_mode) {
+		case DM9000_10MHD:
+			phy_reg4 = 0x21;
+			phy_reg0 = 0x0000;
+			break;
+		case DM9000_10MFD:
+			phy_reg4 = 0x41;
+			phy_reg0 = 0x1100;
+			break;
+		case DM9000_100MHD:
+			phy_reg4 = 0x81;
+			phy_reg0 = 0x2000;
+			break;
+		case DM9000_100MFD:
+			phy_reg4 = 0x101;
+			phy_reg0 = 0x3100;
+			break;
+		}
+		phy_write(4, phy_reg4);	/* Set PHY media mode */
+		phy_write(0, phy_reg0);	/*  Tmp */
+	}
+	DM9000_iow(DM9000_GPCR, 0x01);	/* Let GPIO0 output */
+	DM9000_iow(DM9000_GPR, 0x00);	/* Enable PHY */
+}
+
+/*
+	Init HomeRun DM9801
+*/
+static void
+program_dm9801(u16 HPNA_rev)
+{
+	__u16 reg16, reg17, reg24, reg25;
+	if (!nfloor)
+		nfloor = DM9801_NOISE_FLOOR;
+	reg16 = phy_read(16);
+	reg17 = phy_read(17);
+	reg24 = phy_read(24);
+	reg25 = phy_read(25);
+	switch (HPNA_rev) {
+	case 0xb900:		/* DM9801 E3 */
+		reg16 |= 0x1000;
+		reg25 = ((reg24 + nfloor) & 0x00ff) | 0xf000;
+		break;
+	case 0xb901:		/* DM9801 E4 */
+		reg25 = ((reg24 + nfloor) & 0x00ff) | 0xc200;
+		reg17 = (reg17 & 0xfff0) + nfloor + 3;
+		break;
+	case 0xb902:		/* DM9801 E5 */
+	case 0xb903:		/* DM9801 E6 */
+	default:
+		reg16 |= 0x1000;
+		reg25 = ((reg24 + nfloor - 3) & 0x00ff) | 0xc200;
+		reg17 = (reg17 & 0xfff0) + nfloor;
+	}
+	phy_write(16, reg16);
+	phy_write(17, reg17);
+	phy_write(25, reg25);
+}
+
+/*
+	Init LongRun DM9802
+*/
+static void
+program_dm9802(void)
+{
+	__u16 reg25;
+	if (!nfloor)
+		nfloor = DM9802_NOISE_FLOOR;
+	reg25 = phy_read(25);
+	reg25 = (reg25 & 0xff00) + nfloor;
+	phy_write(25, reg25);
+}
+
+/* Identify NIC type
+*/
+static void
+identify_nic(void)
+{
+	struct board_info *db = &dmfe_info;	/* Point a board information structure */
+	u16 phy_reg3;
+	DM9000_iow(DM9000_NCR, NCR_EXT_PHY);
+	phy_reg3 = phy_read(3);
+	switch (phy_reg3 & 0xfff0) {
+	case 0xb900:
+		if (phy_read(31) == 0x4404) {
+			db->nic_type = HOMERUN_NIC;
+			program_dm9801(phy_reg3);
+			DM9000_DBG("found homerun NIC\n");
+		} else {
+			db->nic_type = LONGRUN_NIC;
+			DM9000_DBG("found longrun NIC\n");
+			program_dm9802();
+		}
+		break;
+	default:
+		db->nic_type = FASTETHER_NIC;
+		break;
+	}
+	DM9000_iow(DM9000_NCR, 0);
+}
+
+/* General Purpose dm9000 reset routine */
+static void
+dm9000_reset(void)
+{
+	DM9000_DBG("resetting\n");
+	DM9000_iow(DM9000_NCR, NCR_RST);
+	udelay(1000);		/* delay 1ms */
+}
+
+/* Initilize dm9000 board
+*/
+int
+eth_init(bd_t * bd)
+{
+	int i, oft, lnk;
+	DM9000_DBG("eth_init()\n");
+
+	/* RESET device */
+	dm9000_reset();
+	dm9000_probe();
+
+	/* NIC Type: FASTETHER, HOMERUN, LONGRUN */
+	identify_nic();
+
+	/* GPIO0 on pre-activate PHY */
+	DM9000_iow(DM9000_GPR, 0x00);	/*REG_1F bit0 activate phyxcer */
+
+	/* Set PHY */
+	set_PHY_mode();
+
+	/* Program operating register */
+	DM9000_iow(DM9000_NCR, 0x0);	/* only intern phy supported by now */
+	DM9000_iow(DM9000_TCR, 0);	/* TX Polling clear */
+	DM9000_iow(DM9000_BPTR, 0x3f);	/* Less 3Kb, 200us */
+	DM9000_iow(DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8));	/* Flow Control : High/Low Water */
+	DM9000_iow(DM9000_FCR, 0x0);	/* SH FIXME: This looks strange! Flow Control */
+	DM9000_iow(DM9000_SMCR, 0);	/* Special Mode */
+	DM9000_iow(DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);	/* clear TX status */
+	DM9000_iow(DM9000_ISR, 0x0f);	/* Clear interrupt status */
+
+	/* Set Node address */
+	for (i = 0; i < 6; i++)
+		((u16 *) bd->bi_enetaddr)[i] = read_srom_word(i);
+	printf("MAC: %02x:%02x:%02x:%02x:%02x:%02x\n", bd->bi_enetaddr[0],
+	       bd->bi_enetaddr[1], bd->bi_enetaddr[2], bd->bi_enetaddr[3],
+	       bd->bi_enetaddr[4], bd->bi_enetaddr[5]);
+	for (i = 0, oft = 0x10; i < 6; i++, oft++)
+		DM9000_iow(oft, bd->bi_enetaddr[i]);
+	for (i = 0, oft = 0x16; i < 8; i++, oft++)
+		DM9000_iow(oft, 0xff);
+
+	/* read back mac, just to be sure */
+	for (i = 0, oft = 0x10; i < 6; i++, oft++)
+		DM9000_DBG("%02x:", DM9000_ior(oft));
+	DM9000_DBG("\n");
+
+	/* Activate DM9000 */
+	DM9000_iow(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);	/* RX enable */
+	DM9000_iow(DM9000_IMR, IMR_PAR);	/* Enable TX/RX interrupt mask */
+	i = 0;
+	while (!(phy_read(1) & 0x20)) {	/* autonegation complete bit */
+		udelay(1000);
+		i++;
+		if (i == 10000) {
+			printf("could not establish link\n");
+			return 0;
+		}
+	}
+
+	/* see what we've got */
+	lnk = phy_read(17) >> 12;
+	printf("operating at ");
+	switch (lnk) {
+	case 1:
+		printf("10M half duplex ");
+		break;
+	case 2:
+		printf("10M full duplex ");
+		break;
+	case 4:
+		printf("100M half duplex ");
+		break;
+	case 8:
+		printf("100M full duplex ");
+		break;
+	default:
+		printf("unknown: %d ", lnk);
+		break;
+	}
+	printf("mode\n");
+	return 0;
+}
+
+/*
+  Hardware start transmission.
+  Send a packet to media from the upper layer.
+*/
+int
+eth_send(volatile void *packet, int length)
+{
+	char *data_ptr;
+	u32 tmplen, i;
+	int tmo;
+	DM9000_DBG("eth_send: length: %d\n", length);
+	for (i = 0; i < length; i++) {
+		if (i % 8 == 0)
+			DM9000_DBG("\nSend: 02x: ", i);
+		DM9000_DBG("%02x ", ((unsigned char *) packet)[i]);
+	} DM9000_DBG("\n");
+
+	/* Move data to DM9000 TX RAM */
+	data_ptr = (char *) packet;
+	DM9000_outb(DM9000_MWCMD, DM9000_IO);
+
+#ifdef CONFIG_DM9000_USE_8BIT
+	/* Byte mode */
+	for (i = 0; i < length; i++)
+		DM9000_outb((data_ptr[i] & 0xff), DM9000_DATA);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_16BIT
+	tmplen = (length + 1) / 2;
+	for (i = 0; i < tmplen; i++)
+		DM9000_outw(((u16 *) data_ptr)[i], DM9000_DATA);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_32BIT
+	tmplen = (length + 3) / 4;
+	for (i = 0; i < tmplen; i++)
+		DM9000_outl(((u32 *) data_ptr)[i], DM9000_DATA);
+
+#endif				/*  */
+
+	/* Set TX length to DM9000 */
+	DM9000_iow(DM9000_TXPLL, length & 0xff);
+	DM9000_iow(DM9000_TXPLH, (length >> 8) & 0xff);
+
+	/* Issue TX polling command */
+	DM9000_iow(DM9000_TCR, TCR_TXREQ);	/* Cleared after TX complete */
+
+	/* wait for end of transmission */
+	tmo = get_timer(0) + 5 * CFG_HZ;
+	while (DM9000_ior(DM9000_TCR) & TCR_TXREQ) {
+		if (get_timer(0) >= tmo) {
+			printf("transmission timeout\n");
+			break;
+		}
+	}
+	DM9000_DBG("transmit done\n\n");
+	return 0;
+}
+
+/*
+  Stop the interface.
+  The interface is stopped when it is brought.
+*/
+void
+eth_halt(void)
+{
+	DM9000_DBG("eth_halt\n");
+
+	/* RESET devie */
+	phy_write(0, 0x8000);	/* PHY RESET */
+	DM9000_iow(DM9000_GPR, 0x01);	/* Power-Down PHY */
+	DM9000_iow(DM9000_IMR, 0x80);	/* Disable all interrupt */
+	DM9000_iow(DM9000_RCR, 0x00);	/* Disable RX */
+}
+
+/*
+  Received a packet and pass to upper layer
+*/
+int
+eth_rx(void)
+{
+	u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
+	u16 RxStatus, RxLen = 0;
+	u32 tmplen, i;
+
+	/* Check packet ready or not */
+	DM9000_ior(DM9000_MRCMDX);	/* Dummy read */
+	rxbyte = DM9000_inb(DM9000_DATA);	/* Got most updated data */
+	if (rxbyte == 0)
+		return 0;
+
+	/* Status check: this byte must be 0 or 1 */
+	if (rxbyte > 1) {
+		DM9000_iow(DM9000_RCR, 0x00);	/* Stop Device */
+		DM9000_iow(DM9000_ISR, 0x80);	/* Stop INT request */
+		DM9000_DBG("rx status check: %d\n", rxbyte);
+	}
+	DM9000_DBG("receiving packet\n");
+
+	/* A packet ready now  & Get status/length */
+	DM9000_outb(DM9000_MRCMD, DM9000_IO);
+
+#ifdef CONFIG_DM9000_USE_8BIT
+	RxStatus = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
+	RxLen = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_16BIT
+	RxStatus = DM9000_inw(DM9000_DATA);
+	RxLen = DM9000_inw(DM9000_DATA);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_32BIT
+	tmpdata = DM9000_inl(DM9000_DATA);
+	RxStatus = tmpdata;
+	RxLen = tmpdata >> 16;
+
+#endif				/*  */
+	DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
+
+	/* Move data from DM9000 */
+	/* Read received packet from RX SRAM */
+#ifdef CONFIG_DM9000_USE_8BIT
+	for (i = 0; i < RxLen; i++)
+		rdptr[i] = DM9000_inb(DM9000_DATA);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_16BIT
+	tmplen = (RxLen + 1) / 2;
+	for (i = 0; i < tmplen; i++)
+		((u16 *) rdptr)[i] = DM9000_inw(DM9000_DATA);
+
+#endif				/*  */
+#ifdef CONFIG_DM9000_USE_32BIT
+	tmplen = (RxLen + 3) / 4;
+	for (i = 0; i < tmplen; i++)
+		((u32 *) rdptr)[i] = DM9000_inl(DM9000_DATA);
+
+#endif				/*  */
+	if ((RxStatus & 0xbf00) || (RxLen < 0x40)
+	    || (RxLen > DM9000_PKT_MAX)) {
+		if (RxStatus & 0x100) {
+			printf("rx fifo error\n");
+		}
+		if (RxStatus & 0x200) {
+			printf("rx crc error\n");
+		}
+		if (RxStatus & 0x8000) {
+			printf("rx length error\n");
+		}
+		if (RxLen > DM9000_PKT_MAX) {
+			printf("rx length too big\n");
+			dm9000_reset();
+		}
+	} else {
+
+		/* Pass to upper layer */
+		DM9000_DBG("passing packet to upper layer\n");
+		NetReceive(NetRxPackets[0], RxLen);
+		return RxLen;
+	}
+	return 0;
+}
+
+/*
+  Read a word data from SROM
+*/
+static u16
+read_srom_word(int offset)
+{
+	DM9000_iow(DM9000_EPAR, offset);
+	DM9000_iow(DM9000_EPCR, 0x4);
+	udelay(200);
+	DM9000_iow(DM9000_EPCR, 0x0);
+	return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8));
+}
+
+/*
+   Read a byte from I/O port
+*/
+static u8
+DM9000_ior(int reg)
+{
+	DM9000_outb(reg, DM9000_IO);
+	return DM9000_inb(DM9000_DATA);
+}
+
+/*
+   Write a byte to I/O port
+*/
+static void
+DM9000_iow(int reg, u8 value)
+{
+	DM9000_outb(reg, DM9000_IO);
+	DM9000_outb(value, DM9000_DATA);
+}
+
+/*
+   Read a word from phyxcer
+*/
+static u16
+phy_read(int reg)
+{
+	u16 val;
+
+	/* Fill the phyxcer register into REG_0C */
+	DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
+	DM9000_iow(DM9000_EPCR, 0xc);	/* Issue phyxcer read command */
+	udelay(100);		/* Wait read complete */
+	DM9000_iow(DM9000_EPCR, 0x0);	/* Clear phyxcer read command */
+	val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
+
+	/* The read data keeps on REG_0D & REG_0E */
+	DM9000_DBG("phy_read(%d): %d\n", reg, val);
+	return val;
+}
+
+/*
+   Write a word to phyxcer
+*/
+static void
+phy_write(int reg, u16 value)
+{
+
+	/* Fill the phyxcer register into REG_0C */
+	DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
+
+	/* Fill the written data into REG_0D & REG_0E */
+	DM9000_iow(DM9000_EPDRL, (value & 0xff));
+	DM9000_iow(DM9000_EPDRH, ((value >> 8) & 0xff));
+	DM9000_iow(DM9000_EPCR, 0xa);	/* Issue phyxcer write command */
+	udelay(500);		/* Wait write complete */
+	DM9000_iow(DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
+	DM9000_DBG("phy_write(reg:%d, value:%d)\n", reg, value);
+}
+#endif				/* CONFIG_DRIVER_DM9000 */
diff --git a/drivers/dm9000x.h b/drivers/dm9000x.h
new file mode 100644
index 0000000..f47ff8c
--- /dev/null
+++ b/drivers/dm9000x.h
@@ -0,0 +1,119 @@
+/*
+ * dm9000 Ethernet
+ */
+
+#ifdef CONFIG_DRIVER_DM9000
+
+#define DM9000_ID		0x90000A46
+#define DM9000_PKT_MAX		1536	/* Received packet max size */
+#define DM9000_PKT_RDY		0x01	/* Packet ready to receive */
+
+/* although the registers are 16 bit, they are 32-bit aligned.
+ */
+
+#define DM9000_NCR             0x00
+#define DM9000_NSR             0x01
+#define DM9000_TCR             0x02
+#define DM9000_TSR1            0x03
+#define DM9000_TSR2            0x04
+#define DM9000_RCR             0x05
+#define DM9000_RSR             0x06
+#define DM9000_ROCR            0x07
+#define DM9000_BPTR            0x08
+#define DM9000_FCTR            0x09
+#define DM9000_FCR             0x0A
+#define DM9000_EPCR            0x0B
+#define DM9000_EPAR            0x0C
+#define DM9000_EPDRL           0x0D
+#define DM9000_EPDRH           0x0E
+#define DM9000_WCR             0x0F
+
+#define DM9000_PAR             0x10
+#define DM9000_MAR             0x16
+
+#define DM9000_GPCR			0x1e
+#define DM9000_GPR             0x1f
+#define DM9000_TRPAL           0x22
+#define DM9000_TRPAH           0x23
+#define DM9000_RWPAL           0x24
+#define DM9000_RWPAH           0x25
+
+#define DM9000_VIDL            0x28
+#define DM9000_VIDH            0x29
+#define DM9000_PIDL            0x2A
+#define DM9000_PIDH            0x2B
+
+#define DM9000_CHIPR           0x2C
+#define DM9000_SMCR            0x2F
+
+#define DM9000_PHY		0x40	/* PHY address 0x01 */
+
+#define DM9000_MRCMDX          0xF0
+#define DM9000_MRCMD           0xF2
+#define DM9000_MRRL            0xF4
+#define DM9000_MRRH            0xF5
+#define DM9000_MWCMDX			0xF6
+#define DM9000_MWCMD           0xF8
+#define DM9000_MWRL            0xFA
+#define DM9000_MWRH            0xFB
+#define DM9000_TXPLL           0xFC
+#define DM9000_TXPLH           0xFD
+#define DM9000_ISR             0xFE
+#define DM9000_IMR             0xFF
+
+#define NCR_EXT_PHY		(1<<7)
+#define NCR_WAKEEN		(1<<6)
+#define NCR_FCOL		(1<<4)
+#define NCR_FDX			(1<<3)
+#define NCR_LBK			(3<<1)
+#define NCR_RST			(1<<0)
+
+#define NSR_SPEED		(1<<7)
+#define NSR_LINKST		(1<<6)
+#define NSR_WAKEST		(1<<5)
+#define NSR_TX2END		(1<<3)
+#define NSR_TX1END		(1<<2)
+#define NSR_RXOV		(1<<1)
+
+#define TCR_TJDIS		(1<<6)
+#define TCR_EXCECM		(1<<5)
+#define TCR_PAD_DIS2	(1<<4)
+#define TCR_CRC_DIS2	(1<<3)
+#define TCR_PAD_DIS1	(1<<2)
+#define TCR_CRC_DIS1	(1<<1)
+#define TCR_TXREQ		(1<<0)
+
+#define TSR_TJTO		(1<<7)
+#define TSR_LC			(1<<6)
+#define TSR_NC			(1<<5)
+#define TSR_LCOL		(1<<4)
+#define TSR_COL			(1<<3)
+#define TSR_EC			(1<<2)
+
+#define RCR_WTDIS		(1<<6)
+#define RCR_DIS_LONG	(1<<5)
+#define RCR_DIS_CRC		(1<<4)
+#define RCR_ALL			(1<<3)
+#define RCR_RUNT		(1<<2)
+#define RCR_PRMSC		(1<<1)
+#define RCR_RXEN		(1<<0)
+
+#define RSR_RF			(1<<7)
+#define RSR_MF			(1<<6)
+#define RSR_LCS			(1<<5)
+#define RSR_RWTO		(1<<4)
+#define RSR_PLE			(1<<3)
+#define RSR_AE			(1<<2)
+#define RSR_CE			(1<<1)
+#define RSR_FOE			(1<<0)
+
+#define FCTR_HWOT(ot)	(( ot & 0xf ) << 4 )
+#define FCTR_LWOT(ot)	( ot & 0xf )
+
+#define IMR_PAR			(1<<7)
+#define IMR_ROOM		(1<<3)
+#define IMR_ROM			(1<<2)
+#define IMR_PTM			(1<<1)
+#define IMR_PRM			(1<<0)
+
+#endif
diff --git a/drivers/serial_imx.c b/drivers/serial_imx.c
new file mode 100644
index 0000000..9dbaa56
--- /dev/null
+++ b/drivers/serial_imx.c
@@ -0,0 +1,201 @@
+/*
+ * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#if defined (CONFIG_IMX)
+
+#include <asm/arch/imx-regs.h>
+
+#ifndef CONFIG_IMX_SERIAL_NONE
+
+#if defined CONFIG_IMX_SERIAL1
+#define UART_BASE IMX_UART1_BASE
+#elif defined CONFIG_IMX_SERIAL2
+#define UART_BASE IMX_UART2_BASE
+#else
+#error "define CONFIG_IMX_SERIAL1, CONFIG_IMX_SERIAL2 or CONFIG_IMX_SERIAL_NONE"
+#endif
+
+struct imx_serial {
+	volatile uint32_t urxd[16];
+	volatile uint32_t utxd[16];
+	volatile uint32_t ucr1;
+	volatile uint32_t ucr2;
+	volatile uint32_t ucr3;
+	volatile uint32_t ucr4;
+	volatile uint32_t ufcr;
+	volatile uint32_t usr1;
+	volatile uint32_t usr2;
+	volatile uint32_t uesc;
+	volatile uint32_t utim;
+	volatile uint32_t ubir;
+	volatile uint32_t ubmr;
+	volatile uint32_t ubrc;
+	volatile uint32_t bipr[4];
+	volatile uint32_t bmpr[4];
+	volatile uint32_t uts;
+};
+
+void serial_setbrg (void)
+{
+	serial_init();
+}
+
+extern void imx_gpio_mode(int gpio_mode);
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+	volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+#ifdef CONFIG_IMX_SERIAL1
+	imx_gpio_mode(PC11_PF_UART1_TXD);
+	imx_gpio_mode(PC12_PF_UART1_RXD);
+#else
+	imx_gpio_mode(PB30_PF_UART2_TXD);
+	imx_gpio_mode(PB31_PF_UART2_RXD);
+#endif
+
+	/* Disable UART */
+	base->ucr1 &= ~UCR1_UARTEN;
+
+	/* Set to default POR state */
+
+	base->ucr1 = 0x00000004;
+	base->ucr2 = 0x00000000;
+	base->ucr3 = 0x00000000;
+	base->ucr4 = 0x00008040;
+	base->uesc = 0x0000002B;
+	base->utim = 0x00000000;
+	base->ubir = 0x00000000;
+	base->ubmr = 0x00000000;
+	base->uts  = 0x00000000;
+	/* Set clocks */
+	base->ucr4 |= UCR4_REF16;
+
+	/* Configure FIFOs */
+	base->ufcr = 0xa81;
+
+	/* Set the numerator value minus one of the BRM ratio */
+	base->ubir = (CONFIG_BAUDRATE / 100) - 1;
+
+	/* Set the denominator value minus one of the BRM ratio	*/
+	base->ubmr = 10000 - 1;
+
+	/* Set to 8N1 */
+	base->ucr2 &= ~UCR2_PREN;
+	base->ucr2 |= UCR2_WS;
+	base->ucr2 &= ~UCR2_STPB;
+
+	/* Ignore RTS */
+	base->ucr2 |= UCR2_IRTS;
+
+	/* Enable UART */
+	base->ucr1 |= UCR1_UARTEN | UCR1_UARTCLKEN;
+
+	/* Enable FIFOs */
+	base->ucr2 |= UCR2_SRST | UCR2_RXEN | UCR2_TXEN;
+
+  	/* Clear status flags */
+	base->usr2 |= USR2_ADET  |
+	          USR2_DTRF  |
+	          USR2_IDLE  |
+	          USR2_IRINT |
+	          USR2_WAKE  |
+	          USR2_RTSF  |
+	          USR2_BRCD  |
+	          USR2_ORE   |
+	          USR2_RDR;
+
+  	/* Clear status flags */
+	base->usr1 |= USR1_PARITYERR |
+	          USR1_RTSD      |
+	          USR1_ESCF      |
+	          USR1_FRAMERR   |
+	          USR1_AIRINT    |
+	          USR1_AWAKE;
+	return (0);
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is successful, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+	volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+	unsigned char ch;
+
+	while(base->uts & UTS_RXEMPTY);
+
+	ch = (char)base->urxd[0];
+
+	return ch;
+}
+
+#ifdef CONFIG_HWFLOW
+static int hwflow = 0; /* turned off by default */
+int hwflow_onoff(int on)
+{
+}
+#endif
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+	volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+
+	/* Wait for Tx FIFO not full */
+	while (base->uts & UTS_TXFULL);
+
+	base->utxd[0] = c;
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc ('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc (void)
+{
+	volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+
+	/* If receive fifo is empty, return false */
+	if (base->uts & UTS_RXEMPTY)
+		return 0;
+	return 1;
+}
+
+void
+serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+#endif /* CONFIG_IMX_SERIAL_NONE */
+#endif /* defined CONFIG_IMX */