drivers/video : move video drivers to drivers/video

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 310 insertions, 0 deletions

diff --git a/drivers/video/sed13806.c b/drivers/video/sed13806.c
new file mode 100644
index 0000000..6996ca8
--- /dev/null
+++ b/drivers/video/sed13806.c
@@ -0,0 +1,310 @@
+/*
+ * (C) Copyright 2002
+ * Stäubli Faverges - <www.staubli.com>
+ * Pierre AUBERT  p.aubert@staubli.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* Video support for Epson SED13806 chipset                                  */
+
+#include <common.h>
+
+#ifdef CONFIG_VIDEO_SED13806
+
+#include <video_fb.h>
+#include <sed13806.h>
+
+#define readByte(ptrReg)                \
+    *(volatile unsigned char *)(sed13806.isaBase + ptrReg)
+
+#define writeByte(ptrReg,value) \
+    *(volatile unsigned char *)(sed13806.isaBase + ptrReg) = value
+
+#ifdef CONFIG_TOTAL5200
+#define writeWord(ptrReg,value) \
+    (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = value)
+#else
+#define writeWord(ptrReg,value) \
+    (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = ((value >> 8 ) & 0xff) | ((value << 8) & 0xff00))
+#endif
+
+GraphicDevice sed13806;
+
+/*-----------------------------------------------------------------------------
+ * EpsonSetRegs --
+ *-----------------------------------------------------------------------------
+ */
+static void EpsonSetRegs (void)
+{
+    /* the content of the chipset register depends on the board (clocks, ...)*/
+    const S1D_REGS *preg = board_get_regs ();
+    while (preg -> Index) {
+	writeByte (preg -> Index, preg -> Value);
+	preg ++;
+    }
+}
+
+/*-----------------------------------------------------------------------------
+ * video_hw_init --
+ *-----------------------------------------------------------------------------
+ */
+void *video_hw_init (void)
+{
+    unsigned int *vm, i;
+
+    memset (&sed13806, 0, sizeof (GraphicDevice));
+
+    /* Initialization of the access to the graphic chipset
+       Retreive base address of the chipset
+       (see board/RPXClassic/eccx.c)                                         */
+    if ((sed13806.isaBase = board_video_init ()) == 0) {
+	return (NULL);
+    }
+
+    sed13806.frameAdrs = sed13806.isaBase + FRAME_BUFFER_OFFSET;
+    sed13806.winSizeX = board_get_width ();
+    sed13806.winSizeY = board_get_height ();
+
+#if defined(CONFIG_VIDEO_SED13806_8BPP)
+    sed13806.gdfIndex = GDF__8BIT_INDEX;
+    sed13806.gdfBytesPP = 1;
+
+#elif defined(CONFIG_VIDEO_SED13806_16BPP)
+    sed13806.gdfIndex = GDF_16BIT_565RGB;
+    sed13806.gdfBytesPP = 2;
+
+#else
+#error Unsupported SED13806 BPP
+#endif
+
+    sed13806.memSize = sed13806.winSizeX * sed13806.winSizeY * sed13806.gdfBytesPP;
+
+    /* Load SED registers                                                    */
+    EpsonSetRegs ();
+
+    /* (see board/RPXClassic/RPXClassic.c)                                   */
+    board_validate_screen (sed13806.isaBase);
+
+    /* Clear video memory */
+    i = sed13806.memSize/4;
+    vm = (unsigned int *)sed13806.frameAdrs;
+    while(i--)
+	*vm++ = 0;
+
+
+    return (&sed13806);
+}
+/*-----------------------------------------------------------------------------
+ * Epson_wait_idle -- Wait for hardware to become idle
+ *-----------------------------------------------------------------------------
+ */
+static void Epson_wait_idle (void)
+{
+    while (readByte (BLT_CTRL0) & 0x80);
+
+    /* Read a word in the BitBLT memory area to shutdown the BitBLT engine   */
+    *(volatile unsigned short *)(sed13806.isaBase + BLT_REG);
+}
+
+/*-----------------------------------------------------------------------------
+ * video_hw_bitblt --
+ *-----------------------------------------------------------------------------
+ */
+void video_hw_bitblt (
+    unsigned int bpp,             /* bytes per pixel */
+    unsigned int src_x,           /* source pos x */
+    unsigned int src_y,           /* source pos y */
+    unsigned int dst_x,           /* dest pos x */
+    unsigned int dst_y,           /* dest pos y */
+    unsigned int dim_x,           /* frame width */
+    unsigned int dim_y            /* frame height */
+    )
+{
+    register GraphicDevice *pGD = (GraphicDevice *)&sed13806;
+    unsigned long	srcAddr, dstAddr;
+    unsigned int stride = bpp * pGD -> winSizeX;
+
+    srcAddr = (src_y * stride) + (src_x * bpp);
+    dstAddr = (dst_y * stride) + (dst_x * bpp);
+
+    Epson_wait_idle ();
+
+    writeByte(BLT_ROP,0x0C);	/* source */
+    writeByte(BLT_OP,0x02);/* move blit in positive direction with ROP */
+    writeWord(BLT_MEM_OFF0, stride / 2);
+    if (pGD -> gdfIndex == GDF__8BIT_INDEX) {
+	writeByte(BLT_CTRL1,0x00);
+    }
+    else {
+	writeByte(BLT_CTRL1,0x01);
+    }
+
+    writeWord(BLT_WIDTH0,(dim_x - 1));
+    writeWord(BLT_HEIGHT0,(dim_y - 1));
+
+    /* set up blit registers                                                 */
+    writeByte(BLT_SRC_ADDR0,srcAddr);
+    writeByte(BLT_SRC_ADDR1,srcAddr>>8);
+    writeByte(BLT_SRC_ADDR2,srcAddr>>16);
+
+    writeByte(BLT_DST_ADDR0,dstAddr);
+    writeByte(BLT_DST_ADDR1,dstAddr>>8);
+    writeByte(BLT_DST_ADDR2,dstAddr>>16);
+
+    /* Engage the blt engine                                                 */
+    /* rectangular region for src and dst                                    */
+    writeByte(BLT_CTRL0,0x80);
+
+    /* wait untill current blits finished                                    */
+    Epson_wait_idle ();
+}
+/*-----------------------------------------------------------------------------
+ * video_hw_rectfill --
+ *-----------------------------------------------------------------------------
+ */
+void video_hw_rectfill (
+    unsigned int bpp,             /* bytes per pixel */
+    unsigned int dst_x,           /* dest pos x */
+    unsigned int dst_y,           /* dest pos y */
+    unsigned int dim_x,           /* frame width */
+    unsigned int dim_y,           /* frame height */
+    unsigned int color            /* fill color */
+     )
+{
+    register GraphicDevice *pGD = (GraphicDevice *)&sed13806;
+    unsigned long	dstAddr;
+    unsigned int stride = bpp * pGD -> winSizeX;
+
+    dstAddr = (dst_y * stride) + (dst_x * bpp);
+
+    Epson_wait_idle ();
+
+    /* set up blit registers                                                 */
+    writeByte(BLT_DST_ADDR0,dstAddr);
+    writeByte(BLT_DST_ADDR1,dstAddr>>8);
+    writeByte(BLT_DST_ADDR2,dstAddr>>16);
+
+    writeWord(BLT_WIDTH0,(dim_x - 1));
+    writeWord(BLT_HEIGHT0,(dim_y - 1));
+    writeWord(BLT_FGCOLOR0,color);
+
+    writeByte(BLT_OP,0x0C);  /* solid fill                                   */
+    writeWord(BLT_MEM_OFF0,stride / 2);
+
+    if (pGD -> gdfIndex == GDF__8BIT_INDEX) {
+	writeByte(BLT_CTRL1,0x00);
+    }
+    else {
+	writeByte(BLT_CTRL1,0x01);
+    }
+
+    /* Engage the blt engine                                                 */
+    /* rectangular region for src and dst                                    */
+    writeByte(BLT_CTRL0,0x80);
+
+    /* wait untill current blits finished                                    */
+    Epson_wait_idle ();
+}
+
+/*-----------------------------------------------------------------------------
+ * video_set_lut --
+ *-----------------------------------------------------------------------------
+ */
+void video_set_lut (
+    unsigned int index,           /* color number */
+    unsigned char r,              /* red */
+    unsigned char g,              /* green */
+    unsigned char b               /* blue */
+    )
+{
+    writeByte(REG_LUT_ADDR, index );
+    writeByte(REG_LUT_DATA, r);
+    writeByte(REG_LUT_DATA, g);
+    writeByte(REG_LUT_DATA, b);
+}
+#ifdef CONFIG_VIDEO_HW_CURSOR
+/*-----------------------------------------------------------------------------
+ * video_set_hw_cursor --
+ *-----------------------------------------------------------------------------
+ */
+void video_set_hw_cursor (int x, int y)
+{
+    writeByte (LCD_CURSOR_XL, (x & 0xff));
+    writeByte (LCD_CURSOR_XM, (x >> 8));
+    writeByte (LCD_CURSOR_YL, (y & 0xff));
+    writeByte (LCD_CURSOR_YM, (y >> 8));
+}
+
+/*-----------------------------------------------------------------------------
+ * video_init_hw_cursor --
+ *-----------------------------------------------------------------------------
+ */
+void video_init_hw_cursor (int font_width, int font_height)
+{
+    volatile unsigned char *ptr;
+    unsigned char pattern;
+    int i;
+
+
+    /* Init cursor content
+       Cursor size is 64x64 pixels
+       Start of the cursor memory depends on panel type (dual panel ...)     */
+    if ((i = readByte (LCD_CURSOR_START)) == 0) {
+	ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - HWCURSORSIZE);
+    }
+    else {
+	ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - (i * 8192));
+    }
+
+    /* Fill the first line and the first empty line after cursor             */
+    for (i = 0, pattern = 0; i < 64; i++) {
+	if (i < font_width) {
+	    /* Invert background                                             */
+	    pattern |= 0x3;
+
+	}
+	else {
+	    /* Background                                                    */
+	    pattern |= 0x2;
+	}
+	if ((i & 3) == 3) {
+	    *ptr = pattern;
+	    *(ptr + font_height * 16) = 0xaa;
+	    ptr ++;
+	    pattern = 0;
+	}
+	pattern <<= 2;
+    }
+
+    /* Duplicate this line                                                   */
+    for (i = 1; i < font_height; i++) {
+	memcpy ((void *)ptr, (void *)(ptr - 16), 16);
+	ptr += 16;
+    }
+
+    for (; i < 64; i++) {
+	memcpy ((void *)(ptr + 16), (void *)ptr, 16);
+	ptr += 16;
+    }
+
+    /* Select cursor mode                                                    */
+    writeByte (LCD_CURSOR_CNTL, 1);
+}
+#endif
+#endif