Merge branch 'master' of git://git.denx.de/u-boot-usb

7 files changed, 124 insertions, 75 deletions

diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile
index 94551c4..e6ae9f1 100644
--- a/drivers/usb/eth/Makefile
+++ b/drivers/usb/eth/Makefile
@@ -5,8 +5,6 @@
 
 # new USB host ethernet layer dependencies
 obj-$(CONFIG_USB_HOST_ETHER) += usb_ether.o
-ifdef CONFIG_USB_ETHER_ASIX
-obj-y += asix.o
-endif
+obj-$(CONFIG_USB_ETHER_ASIX) += asix.o
 obj-$(CONFIG_USB_ETHER_MCS7830) += mcs7830.o
 obj-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 2efd5a4..70bb550 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
 ifdef CONFIG_USB_GADGET
 obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
 obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
+obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o
 obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
 obj-$(CONFIG_CI_UDC)	+= ci_udc.o
 obj-$(CONFIG_THOR_FUNCTION) += f_thor.o
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index b9816df..7653f03 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -31,7 +31,6 @@
 #include <asm/io.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/gpio.h>
 
 #include "regs-otg.h"
 #include <usb/lin_gadget_compat.h>
@@ -105,7 +104,7 @@ static void stop_activity(struct s3c_udc *dev,
 			  struct usb_gadget_driver *driver);
 static int udc_enable(struct s3c_udc *dev);
 static void udc_set_address(struct s3c_udc *dev, unsigned char address);
-static void reconfig_usbd(void);
+static void reconfig_usbd(struct s3c_udc *dev);
 static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed);
 static void nuke(struct s3c_ep *ep, int status);
 static int s3c_udc_set_halt(struct usb_ep *_ep, int value);
@@ -146,68 +145,14 @@ static struct usb_ep_ops s3c_ep_ops = {
 
 void __iomem		*regs_otg;
 struct s3c_usbotg_reg *reg;
-struct s3c_usbotg_phy *phy;
-static unsigned int usb_phy_ctrl;
 
 bool dfu_usb_get_reset(void)
 {
 	return !!(readl(&reg->gintsts) & INT_RESET);
 }
 
-void otg_phy_init(struct s3c_udc *dev)
-{
-	dev->pdata->phy_control(1);
-
-	/*USB PHY0 Enable */
-	printf("USB PHY0 Enable\n");
-
-	/* Enable PHY */
-	writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl);
-
-	if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */
-		writel((readl(&phy->phypwr)
-			&~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN)
-			&~FORCE_SUSPEND_0), &phy->phypwr);
-	else /* C110 GONI */
-		writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
-			&~FORCE_SUSPEND_0), &phy->phypwr);
-
-	if (s5p_cpu_id == 0x4412)
-		writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
-			EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
-		       &phy->phyclk); /* PLL 24Mhz */
-	else
-		writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
-		       CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
-
-	writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
-	       | PHY_SW_RST0, &phy->rstcon);
-	udelay(10);
-	writel(readl(&phy->rstcon)
-	       &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon);
-	udelay(10);
-}
-
-void otg_phy_off(struct s3c_udc *dev)
-{
-	/* reset controller just in case */
-	writel(PHY_SW_RST0, &phy->rstcon);
-	udelay(20);
-	writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon);
-	udelay(20);
-
-	writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN
-	       | FORCE_SUSPEND_0, &phy->phypwr);
-
-	writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl);
-
-	writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)),
-	      &phy->phyclk);
-
-	udelay(10000);
-
-	dev->pdata->phy_control(0);
-}
+__weak void otg_phy_init(struct s3c_udc *dev) {}
+__weak void otg_phy_off(struct s3c_udc *dev) {}
 
 /***********************************************************/
 
@@ -270,7 +215,7 @@ static int udc_enable(struct s3c_udc *dev)
 	debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
 
 	otg_phy_init(dev);
-	reconfig_usbd();
+	reconfig_usbd(dev);
 
 	debug_cond(DEBUG_SETUP != 0,
 		   "S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n",
@@ -451,15 +396,17 @@ static void stop_activity(struct s3c_udc *dev,
 	udc_reinit(dev);
 }
 
-static void reconfig_usbd(void)
+static void reconfig_usbd(struct s3c_udc *dev)
 {
 	/* 2. Soft-reset OTG Core and then unreset again. */
 	int i;
 	unsigned int uTemp = writel(CORE_SOFT_RESET, &reg->grstctl);
+	uint32_t dflt_gusbcfg;
 
 	debug("Reseting OTG controller\n");
 
-	writel(0<<15		/* PHY Low Power Clock sel*/
+	dflt_gusbcfg =
+		0<<15		/* PHY Low Power Clock sel*/
 		|1<<14		/* Non-Periodic TxFIFO Rewind Enable*/
 		|0x5<<10	/* Turnaround time*/
 		|0<<9 | 0<<8	/* [0:HNP disable,1:HNP enable][ 0:SRP disable*/
@@ -468,8 +415,12 @@ static void reconfig_usbd(void)
 		|0<<6		/* 0: high speed utmi+, 1: full speed serial*/
 		|0<<4		/* 0: utmi+, 1:ulpi*/
 		|1<<3		/* phy i/f  0:8bit, 1:16bit*/
-		|0x7<<0,	/* HS/FS Timeout**/
-		&reg->gusbcfg);
+		|0x7<<0;	/* HS/FS Timeout**/
+
+	if (dev->pdata->usb_gusbcfg)
+		dflt_gusbcfg = dev->pdata->usb_gusbcfg;
+
+	writel(dflt_gusbcfg, &reg->gusbcfg);
 
 	/* 3. Put the OTG device core in the disconnected state.*/
 	uTemp = readl(&reg->dctl);
@@ -854,9 +805,7 @@ int s3c_udc_probe(struct s3c_plat_otg_data *pdata)
 
 	dev->pdata = pdata;
 
-	phy = (struct s3c_usbotg_phy *)pdata->regs_phy;
 	reg = (struct s3c_usbotg_reg *)pdata->regs_otg;
-	usb_phy_ctrl = pdata->usb_phy_ctrl;
 
 	/* regs_otg = (void *)pdata->regs_otg; */
 
diff --git a/drivers/usb/gadget/s3c_udc_otg_phy.c b/drivers/usb/gadget/s3c_udc_otg_phy.c
new file mode 100644
index 0000000..f13cb89
--- /dev/null
+++ b/drivers/usb/gadget/s3c_udc_otg_phy.c
@@ -0,0 +1,101 @@
+/*
+ * drivers/usb/gadget/s3c_udc_otg.c
+ * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers
+ *
+ * Copyright (C) 2008 for Samsung Electronics
+ *
+ * BSP Support for Samsung's UDC driver
+ * available at:
+ * git://git.kernel.org/pub/scm/linux/kernel/git/kki_ap/linux-2.6-samsung.git
+ *
+ * State machine bugfixes:
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Ported to u-boot:
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ * Lukasz Majewski <l.majewski@samsumg.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <linux/list.h>
+#include <malloc.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <asm/io.h>
+
+#include <asm/mach-types.h>
+
+#include "regs-otg.h"
+#include <usb/lin_gadget_compat.h>
+
+#include <usb/s3c_udc.h>
+
+void otg_phy_init(struct s3c_udc *dev)
+{
+	unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
+	struct s3c_usbotg_phy *phy =
+		(struct s3c_usbotg_phy *)dev->pdata->regs_phy;
+
+	dev->pdata->phy_control(1);
+
+	/* USB PHY0 Enable */
+	printf("USB PHY0 Enable\n");
+
+	/* Enable PHY */
+	writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl);
+
+	if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */
+		writel((readl(&phy->phypwr)
+			&~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN)
+			&~FORCE_SUSPEND_0), &phy->phypwr);
+	else /* C110 GONI */
+		writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
+			&~FORCE_SUSPEND_0), &phy->phypwr);
+
+	if (s5p_cpu_id == 0x4412)
+		writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
+			EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
+		       &phy->phyclk); /* PLL 24Mhz */
+	else
+		writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
+		       CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
+
+	writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
+	       | PHY_SW_RST0, &phy->rstcon);
+	udelay(10);
+	writel(readl(&phy->rstcon)
+	       &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon);
+	udelay(10);
+}
+
+void otg_phy_off(struct s3c_udc *dev)
+{
+	unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
+	struct s3c_usbotg_phy *phy =
+		(struct s3c_usbotg_phy *)dev->pdata->regs_phy;
+
+	/* reset controller just in case */
+	writel(PHY_SW_RST0, &phy->rstcon);
+	udelay(20);
+	writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon);
+	udelay(20);
+
+	writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN
+	       | FORCE_SUSPEND_0, &phy->phypwr);
+
+	writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl);
+
+	writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)),
+	      &phy->phyclk);
+
+	udelay(10000);
+
+	dev->pdata->phy_control(0);
+}
diff --git a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
index 4f69b22..9c54b46 100644
--- a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
+++ b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
@@ -551,7 +551,7 @@ static int s3c_udc_irq(int irq, void *_dev)
 				debug_cond(DEBUG_ISR,
 					"\t\tOTG core got reset (%d)!!\n",
 					reset_available);
-				reconfig_usbd();
+				reconfig_usbd(dev);
 				dev->ep0state = WAIT_FOR_SETUP;
 				reset_available = 0;
 				s3c_udc_pre_setup();
diff --git a/drivers/usb/host/ehci-rmobile.c b/drivers/usb/host/ehci-rmobile.c
index b433087..7fe79ef 100644
--- a/drivers/usb/host/ehci-rmobile.c
+++ b/drivers/usb/host/ehci-rmobile.c
@@ -13,18 +13,18 @@
 #include "ehci.h"
 
 #if defined(CONFIG_R8A7740)
-static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
+static u32 usb_base_address[] = {
 	0xC6700000
 };
 #elif defined(CONFIG_R8A7790)
-static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
+static u32 usb_base_address[] = {
 	0xEE080000,	/* USB0 (EHCI) */
 	0xEE0A0000,	/* USB1 */
 	0xEE0C0000,	/* USB2 */
 };
 #elif defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \
 	defined(CONFIG_R8A7794)
-static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
+static u32 usb_base_address[] = {
 	0xEE080000,	/* USB0 (EHCI) */
 	0xEE0C0000,	/* USB1 */
 };
@@ -53,7 +53,7 @@ int ehci_hcd_stop(int index)
 	if (!i)
 		printf("error : ehci(%d) reset failed.\n", index);
 
-	if (index == (CONFIG_USB_MAX_CONTROLLER_COUNT - 1))
+	if (index == (ARRAY_SIZE(usb_base_address) - 1))
 		setbits_le32(SMSTPCR7, SMSTPCR703);
 
 	return 0;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 433e703..79aecd4 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -47,9 +47,9 @@ struct ehci_hcor {
 	uint32_t or_usbcmd;
 #define CMD_PARK	(1 << 11)		/* enable "park" */
 #define CMD_PARK_CNT(c)	(((c) >> 8) & 3)	/* how many transfers to park */
-#define CMD_ASE		(1 << 5)		/* async schedule enable */
 #define CMD_LRESET	(1 << 7)		/* partial reset */
-#define CMD_IAAD	(1 << 5)		/* "doorbell" interrupt */
+#define CMD_IAAD	(1 << 6)		/* "doorbell" interrupt */
+#define CMD_ASE		(1 << 5)		/* async schedule enable */
 #define CMD_PSE		(1 << 4)		/* periodic schedule enable */
 #define CMD_RESET	(1 << 1)		/* reset HC not bus */
 #define CMD_RUN		(1 << 0)		/* start/stop HC */