OMAP5: USB: Add OMAP xHCI file and header

Add the OMAP file for the xHCI Host controller
This code will initilialize the proper components within the
OMAP5 to enable the xHCI host controller.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

2 files changed, 327 insertions, 0 deletions

diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index eb50bc1..328752c 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -45,6 +45,7 @@ COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 # xhci
 COBJS-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
 COBJS-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
+COBJS-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c
new file mode 100644
index 0000000..f4e41fd
--- /dev/null
+++ b/drivers/usb/host/xhci-omap.c
@@ -0,0 +1,326 @@
+/*
+ * OMAP USB HOST xHCI Controller
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm-generic/errno.h>
+#include <asm/omap_common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/xhci-omap.h>
+
+#include <linux/compat.h>
+#include <linux/usb/dwc3.h>
+
+#include "xhci.h"
+
+/* Declare global data pointer */
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct omap_xhci omap;
+
+struct usb_dpll_params {
+	u16	m;
+	u8	n;
+	u8	freq:3;
+	u8	sd;
+	u32	mf;
+};
+
+#define	NUM_USB_CLKS		6
+
+static struct usb_dpll_params omap_usb3_dpll_params[NUM_USB_CLKS] = {
+	{1250, 5, 4, 20, 0},		/* 12 MHz */
+	{3125, 20, 4, 20, 0},		/* 16.8 MHz */
+	{1172, 8, 4, 20, 65537},	/* 19.2 MHz */
+	{1250, 12, 4, 20, 0},		/* 26 MHz */
+	{3125, 47, 4, 20, 92843},	/* 38.4 MHz */
+	{1000, 7, 4, 10, 0},        /* 20 MHz */
+};
+
+static void omap_usb_dpll_relock(struct omap_usb3_phy *phy_regs)
+{
+	u32 val;
+
+	writel(SET_PLL_GO, &phy_regs->pll_go);
+	do {
+		val = readl(&phy_regs->pll_status);
+			if (val & PLL_LOCK)
+				break;
+	} while (1);
+}
+
+static void omap_usb_dpll_lock(struct omap_usb3_phy *phy_regs)
+{
+	u32 clk_index = get_sys_clk_index();
+	u32 val;
+
+	val = readl(&phy_regs->pll_config_1);
+	val &= ~PLL_REGN_MASK;
+	val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT;
+	writel(val, &phy_regs->pll_config_1);
+
+	val = readl(&phy_regs->pll_config_2);
+	val &= ~PLL_SELFREQDCO_MASK;
+	val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT;
+	writel(val, &phy_regs->pll_config_2);
+
+	val = readl(&phy_regs->pll_config_1);
+	val &= ~PLL_REGM_MASK;
+	val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT;
+	writel(val, &phy_regs->pll_config_1);
+
+	val = readl(&phy_regs->pll_config_4);
+	val &= ~PLL_REGM_F_MASK;
+	val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT;
+	writel(val, &phy_regs->pll_config_4);
+
+	val = readl(&phy_regs->pll_config_3);
+	val &= ~PLL_SD_MASK;
+	val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT;
+	writel(val, &phy_regs->pll_config_3);
+
+	omap_usb_dpll_relock(phy_regs);
+}
+
+static void usb3_phy_partial_powerup(struct omap_usb3_phy *phy_regs)
+{
+	u32 rate = get_sys_clk_freq()/1000000;
+	u32 val;
+
+	val = readl((*ctrl)->control_phy_power_usb);
+	val &= ~(USB3_PWRCTL_CLK_CMD_MASK | USB3_PWRCTL_CLK_FREQ_MASK);
+	val |= (USB3_PHY_PARTIAL_RX_POWERON | USB3_PHY_TX_RX_POWERON);
+	val |= rate << USB3_PWRCTL_CLK_FREQ_SHIFT;
+
+	writel(val, (*ctrl)->control_phy_power_usb);
+}
+
+static void usb3_phy_power(int on)
+{
+	u32 val;
+
+	val = readl((*ctrl)->control_phy_power_usb);
+	if (on) {
+		val &= ~USB3_PWRCTL_CLK_CMD_MASK;
+		val |= USB3_PHY_TX_RX_POWERON;
+	} else {
+		val &= (~USB3_PWRCTL_CLK_CMD_MASK & ~USB3_PHY_TX_RX_POWERON);
+	}
+
+	writel(val, (*ctrl)->control_phy_power_usb);
+}
+
+static void dwc_usb3_phy_init(struct omap_usb3_phy *phy_regs)
+{
+	omap_usb_dpll_lock(phy_regs);
+
+	usb3_phy_partial_powerup(phy_regs);
+	/*
+	 * Give enough time for the PHY to partially power-up before
+	 * powering it up completely. delay value suggested by the HW
+	 * team.
+	 */
+	mdelay(100);
+	usb3_phy_power(1);
+}
+
+static void omap_enable_phy_clocks(struct omap_xhci *omap)
+{
+	u32	val;
+
+	/* Setting OCP2SCP1 register */
+	setbits_le32((*prcm)->cm_l3init_ocp2scp1_clkctrl,
+		     OCP2SCP1_CLKCTRL_MODULEMODE_HW);
+
+	/* Turn on 32K AON clk */
+	setbits_le32((*prcm)->cm_coreaon_usb_phy_core_clkctrl,
+		     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+
+	/* Setting CM_L3INIT_CLKSTCTRL to 0x0 i.e NO sleep */
+	writel(0x0, (*prcm)->cm_l3init_clkstctrl);
+
+	val = (USBOTGSS_DMADISABLE |
+			USBOTGSS_STANDBYMODE_SMRT_WKUP |
+			USBOTGSS_IDLEMODE_NOIDLE);
+	writel(val, &omap->otg_wrapper->sysconfig);
+
+	/* Clear the utmi OTG status */
+	val = readl(&omap->otg_wrapper->utmi_otg_status);
+	writel(val, &omap->otg_wrapper->utmi_otg_status);
+
+	/* Enable interrupts */
+	writel(USBOTGSS_COREIRQ_EN, &omap->otg_wrapper->irqenable_set_0);
+	val = (USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN |
+			USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN |
+			USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN	|
+			USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN	|
+			USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN	|
+			USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN	|
+			USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN |
+			USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN |
+			USBOTGSS_IRQ_SET_1_OEVT_EN);
+	writel(val, &omap->otg_wrapper->irqenable_set_1);
+
+	/* Clear the IRQ status */
+	val = readl(&omap->otg_wrapper->irqstatus_1);
+	writel(val, &omap->otg_wrapper->irqstatus_1);
+	val = readl(&omap->otg_wrapper->irqstatus_0);
+	writel(val, &omap->otg_wrapper->irqstatus_0);
+
+	/* Enable the USB OTG Super speed clocks */
+	val = (OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW);
+	setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, val);
+
+};
+
+inline int __board_usb_init(void)
+{
+	return 0;
+}
+int board_usb_init(void) __attribute__((weak, alias("__board_usb_init")));
+
+static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
+{
+	clrsetbits_le32(&dwc3_reg->g_ctl,
+			DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG),
+			DWC3_GCTL_PRTCAPDIR(mode));
+}
+
+static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg)
+{
+	/* Before Resetting PHY, put Core in Reset */
+	setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
+
+	/* Assert USB3 PHY reset */
+	setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
+
+	/* Assert USB2 PHY reset */
+	setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
+
+	mdelay(100);
+
+	/* Clear USB3 PHY reset */
+	clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
+
+	/* Clear USB2 PHY reset */
+	clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
+
+	/* After PHYs are stable we can take Core out of reset state */
+	clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
+}
+
+static int dwc3_core_init(struct dwc3 *dwc3_reg)
+{
+	u32 reg;
+	u32 revision;
+	unsigned int dwc3_hwparams1;
+
+	revision = readl(&dwc3_reg->g_snpsid);
+	/* This should read as U3 followed by revision number */
+	if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) {
+		puts("this is not a DesignWare USB3 DRD Core\n");
+		return -1;
+	}
+
+	dwc3_core_soft_reset(dwc3_reg);
+
+	dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1);
+
+	reg = readl(&dwc3_reg->g_ctl);
+	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
+	reg &= ~DWC3_GCTL_DISSCRAMBLE;
+	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) {
+	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
+		reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+		break;
+	default:
+		debug("No power optimization available\n");
+	}
+
+	/*
+	 * WORKAROUND: DWC3 revisions <1.90a have a bug
+	 * where the device can fail to connect at SuperSpeed
+	 * and falls back to high-speed mode which causes
+	 * the device to enter a Connect/Disconnect loop
+	 */
+	if ((revision & DWC3_REVISION_MASK) < 0x190a)
+		reg |= DWC3_GCTL_U2RSTECN;
+
+	writel(reg, &dwc3_reg->g_ctl);
+
+	return 0;
+}
+
+static int omap_xhci_core_init(struct omap_xhci *omap)
+{
+	int ret = 0;
+
+	omap_enable_phy_clocks(omap);
+
+	dwc_usb3_phy_init(omap->usb3_phy);
+
+	ret = dwc3_core_init(omap->dwc3_reg);
+	if (ret) {
+		debug("%s:failed to initialize core\n", __func__);
+		return ret;
+	}
+
+	/* We are hard-coding DWC3 core to Host Mode */
+	dwc3_set_mode(omap->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
+
+	return ret;
+}
+
+static void omap_xhci_core_exit(struct omap_xhci *omap)
+{
+	usb3_phy_power(0);
+}
+
+int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
+{
+	struct omap_xhci *ctx = &omap;
+	int ret = 0;
+
+	ctx->hcd = (struct xhci_hccr *)OMAP_XHCI_BASE;
+	ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
+	ctx->usb3_phy = (struct omap_usb3_phy *)OMAP_OCP1_SCP_BASE;
+	ctx->otg_wrapper = (struct omap_dwc_wrapper *)OMAP_OTG_WRAPPER_BASE;
+
+	ret = board_usb_init();
+	if (ret != 0) {
+		puts("Failed to initialize board for USB\n");
+		return ret;
+	}
+
+	ret = omap_xhci_core_init(ctx);
+	if (ret < 0) {
+		puts("Failed to initialize xhci\n");
+		return ret;
+	}
+
+	*hccr = (struct xhci_hccr *)(OMAP_XHCI_BASE);
+	*hcor = (struct xhci_hcor *)((uint32_t) *hccr
+				+ HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
+
+	debug("omap-xhci: init hccr %x and hcor %x hc_length %d\n",
+	      (uint32_t)*hccr, (uint32_t)*hcor,
+	      (uint32_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
+
+	return ret;
+}
+
+void xhci_hcd_stop(int index)
+{
+	struct omap_xhci *ctx = &omap;
+
+	omap_xhci_core_exit(ctx);
+}