Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:
	board/samsung/trats2/trats2.c
	include/configs/exynos5250-dt.h

Signed-off-by: Tom Rini <trini@ti.com>

4 files changed, 73 insertions, 21 deletions

diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
index 8dc3d9f..dd95afe 100644
--- a/drivers/usb/gadget/g_dnl.c
+++ b/drivers/usb/gadget/g_dnl.c
@@ -147,6 +147,23 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
 	return 0;
 }
 
+__weak int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+	return gcnum;
+}
+
+static int g_dnl_get_bcd_device_number(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget *gadget = cdev->gadget;
+	int gcnum;
+
+	gcnum = usb_gadget_controller_number(gadget);
+	if (gcnum > 0)
+		gcnum += 0x200;
+
+	return g_dnl_get_board_bcd_device_number(gcnum);
+}
+
 static int g_dnl_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
@@ -181,11 +198,9 @@ static int g_dnl_bind(struct usb_composite_dev *cdev)
 	if (ret)
 		goto error;
 
-	gcnum = usb_gadget_controller_number(gadget);
-
-	debug("gcnum: %d\n", gcnum);
+	gcnum = g_dnl_get_bcd_device_number(cdev);
 	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
+		device_desc.bcdDevice = cpu_to_le16(gcnum);
 	else {
 		debug("%s: controller '%s' not recognized\n",
 			shortname, gadget->name);
diff --git a/drivers/usb/gadget/regs-otg.h b/drivers/usb/gadget/regs-otg.h
index 84bfcc5..ac5d112 100644
--- a/drivers/usb/gadget/regs-otg.h
+++ b/drivers/usb/gadget/regs-otg.h
@@ -226,6 +226,11 @@ struct s3c_usbotg_reg {
 #define CLK_SEL_12MHZ                   (0x2 << 0)
 #define CLK_SEL_48MHZ                   (0x0 << 0)
 
+#define EXYNOS4X12_ID_PULLUP0		(0x01 << 3)
+#define EXYNOS4X12_COMMON_ON_N0	(0x01 << 4)
+#define EXYNOS4X12_CLK_SEL_12MHZ	(0x02 << 0)
+#define EXYNOS4X12_CLK_SEL_24MHZ	(0x05 << 0)
+
 /* Device Configuration Register DCFG */
 #define DEV_SPEED_HIGH_SPEED_20         (0x0 << 0)
 #define DEV_SPEED_FULL_SPEED_20         (0x1 << 0)
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index 7e20209..ba17a04 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -167,8 +167,13 @@ void otg_phy_init(struct s3c_udc *dev)
 		writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
 			&~FORCE_SUSPEND_0), &phy->phypwr);
 
-	writel((readl(&phy->phyclk) &~(ID_PULLUP0 | COMMON_ON_N0)) |
-	       CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
+	if (s5p_cpu_id == 0x4412)
+		writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
+			EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
+		       &phy->phyclk); /* PLL 24Mhz */
+	else
+		writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
+		       CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
 
 	writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
 	       | PHY_SW_RST0, &phy->rstcon);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index c4ce487..1b215c2 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -28,21 +28,48 @@ static struct omap_ehci *const ehci = (struct omap_ehci *)OMAP_EHCI_BASE;
 
 static int omap_uhh_reset(void)
 {
-/*
- * Soft resetting the UHH module causes instability issues on
- * all OMAPs so we just avoid it.
- *
- * See OMAP36xx Errata
- *  i571: USB host EHCI may stall when entering smart-standby mode
- *  i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
- *
- * On OMAP4/5, soft-resetting the UHH module will put it into
- * Smart-Idle mode and lead to a deadlock.
- *
- * On OMAP3, this doesn't seem to be the case but still instabilities
- * are observed on beagle (3530 ES1.0) if soft-reset is used.
- * e.g. NFS root failures with Linux kernel.
- */
+	int timeout = 0;
+	u32 rev;
+
+	rev = readl(&uhh->rev);
+
+	/* Soft RESET */
+	writel(OMAP_UHH_SYSCONFIG_SOFTRESET, &uhh->sysc);
+
+	switch (rev) {
+	case OMAP_USBHS_REV1:
+		/* Wait for soft RESET to complete */
+		while (!(readl(&uhh->syss) & 0x1)) {
+			if (timeout > 100) {
+				printf("%s: RESET timeout\n", __func__);
+				return -1;
+			}
+			udelay(10);
+			timeout++;
+		}
+
+		/* Set No-Idle, No-Standby */
+		writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+		break;
+
+	default:	/* Rev. 2 onwards */
+
+		udelay(2); /* Need to wait before accessing SYSCONFIG back */
+
+		/* Wait for soft RESET to complete */
+		while ((readl(&uhh->sysc) & 0x1)) {
+			if (timeout > 100) {
+				printf("%s: RESET timeout\n", __func__);
+				return -1;
+			}
+			udelay(10);
+			timeout++;
+		}
+
+		writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+		break;
+	}
+
 	return 0;
 }