diff options
| author | Marek Vasut <marex@denx.de> | 2014-11-04 04:23:25 +0100 |
|---|---|---|
| committer | Marek Vasut <marex@denx.de> | 2014-11-07 16:32:02 +0100 |
| commit | 481a11c552978132a7e291213762af82ed3e7003 (patch) | |
| tree | 26cce85bea2af306b8e04d4800b36ba69942f439 /drivers/usb | |
| parent | d1b6c77e1f7ed4821da008c80325f589fcf44df9 (diff) | |
| download | u-boot-imx-481a11c552978132a7e291213762af82ed3e7003.zip u-boot-imx-481a11c552978132a7e291213762af82ed3e7003.tar.gz u-boot-imx-481a11c552978132a7e291213762af82ed3e7003.tar.bz2 | |
usb: s3c-otg: Allow custom gusbcfg
Allow passing in a custom configuration of the gusbcfg register
via platform data.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Vince Bridgers <vbridger@altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
Cc: Stefan Roese <sr@denx.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/gadget/s3c_udc_otg.c | 18 | ||||
| -rw-r--r-- | drivers/usb/gadget/s3c_udc_otg_xfer_dma.c | 2 |
2 files changed, 13 insertions, 7 deletions
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c index b910053..7653f03 100644 --- a/drivers/usb/gadget/s3c_udc_otg.c +++ b/drivers/usb/gadget/s3c_udc_otg.c @@ -104,7 +104,7 @@ static void stop_activity(struct s3c_udc *dev, struct usb_gadget_driver *driver); static int udc_enable(struct s3c_udc *dev); static void udc_set_address(struct s3c_udc *dev, unsigned char address); -static void reconfig_usbd(void); +static void reconfig_usbd(struct s3c_udc *dev); static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed); static void nuke(struct s3c_ep *ep, int status); static int s3c_udc_set_halt(struct usb_ep *_ep, int value); @@ -215,7 +215,7 @@ static int udc_enable(struct s3c_udc *dev) debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev); otg_phy_init(dev); - reconfig_usbd(); + reconfig_usbd(dev); debug_cond(DEBUG_SETUP != 0, "S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n", @@ -396,15 +396,17 @@ static void stop_activity(struct s3c_udc *dev, udc_reinit(dev); } -static void reconfig_usbd(void) +static void reconfig_usbd(struct s3c_udc *dev) { /* 2. Soft-reset OTG Core and then unreset again. */ int i; unsigned int uTemp = writel(CORE_SOFT_RESET, ®->grstctl); + uint32_t dflt_gusbcfg; debug("Reseting OTG controller\n"); - writel(0<<15 /* PHY Low Power Clock sel*/ + dflt_gusbcfg = + 0<<15 /* PHY Low Power Clock sel*/ |1<<14 /* Non-Periodic TxFIFO Rewind Enable*/ |0x5<<10 /* Turnaround time*/ |0<<9 | 0<<8 /* [0:HNP disable,1:HNP enable][ 0:SRP disable*/ @@ -413,8 +415,12 @@ static void reconfig_usbd(void) |0<<6 /* 0: high speed utmi+, 1: full speed serial*/ |0<<4 /* 0: utmi+, 1:ulpi*/ |1<<3 /* phy i/f 0:8bit, 1:16bit*/ - |0x7<<0, /* HS/FS Timeout**/ - ®->gusbcfg); + |0x7<<0; /* HS/FS Timeout**/ + + if (dev->pdata->usb_gusbcfg) + dflt_gusbcfg = dev->pdata->usb_gusbcfg; + + writel(dflt_gusbcfg, ®->gusbcfg); /* 3. Put the OTG device core in the disconnected state.*/ uTemp = readl(®->dctl); diff --git a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c index 4f69b22..9c54b46 100644 --- a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c +++ b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c @@ -551,7 +551,7 @@ static int s3c_udc_irq(int irq, void *_dev) debug_cond(DEBUG_ISR, "\t\tOTG core got reset (%d)!!\n", reset_available); - reconfig_usbd(); + reconfig_usbd(dev); dev->ep0state = WAIT_FOR_SETUP; reset_available = 0; s3c_udc_pre_setup(); |