drivers/usb: regorganisation

move to linux usb driver organisation

as following

drivers/usb/gadget
drivers/usb/host
drivers/usb/musb

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>

1 files changed, 0 insertions, 483 deletions

diff --git a/drivers/usb/usb_ohci.h b/drivers/usb/usb_ohci.h
deleted file mode 100644
index a547337..0000000
--- a/drivers/usb/usb_ohci.h
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
- *
- * usb-ohci.h
- */
-
-/* functions for doing board or CPU specific setup/cleanup */
-extern int usb_board_init(void);
-extern int usb_board_stop(void);
-extern int usb_board_init_fail(void);
-
-extern int usb_cpu_init(void);
-extern int usb_cpu_stop(void);
-extern int usb_cpu_init_fail(void);
-
-
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
-	/* No  Error  */	       0,
-	/* CRC Error  */	       USB_ST_CRC_ERR,
-	/* Bit Stuff  */	       USB_ST_BIT_ERR,
-	/* Data Togg  */	       USB_ST_CRC_ERR,
-	/* Stall      */	       USB_ST_STALLED,
-	/* DevNotResp */	       -1,
-	/* PIDCheck   */	       USB_ST_BIT_ERR,
-	/* UnExpPID   */	       USB_ST_BIT_ERR,
-	/* DataOver   */	       USB_ST_BUF_ERR,
-	/* DataUnder  */	       USB_ST_BUF_ERR,
-	/* reservd    */	       -1,
-	/* reservd    */	       -1,
-	/* BufferOver */	       USB_ST_BUF_ERR,
-	/* BuffUnder  */	       USB_ST_BUF_ERR,
-	/* Not Access */	       -1,
-	/* Not Access */	       -1
-};
-
-static const char *cc_to_string[16] = {
-	"No Error",
-	"CRC: Last data packet from endpoint contained a CRC error.",
-	"BITSTUFFING: Last data packet from endpoint contained a bit " \
-		     "stuffing violation",
-	"DATATOGGLEMISMATCH: Last packet from endpoint had data toggle PID\n" \
-		     "that did not match the expected value.",
-	"STALL: TD was moved to the Done Queue because the endpoint returned" \
-		     " a STALL PID",
-	"DEVICENOTRESPONDING: Device did not respond to token (IN) or did\n" \
-		     "not provide a handshake (OUT)",
-	"PIDCHECKFAILURE: Check bits on PID from endpoint failed on data PID\n"\
-		     "(IN) or handshake (OUT)",
-	"UNEXPECTEDPID: Receive PID was not valid when encountered or PID\n" \
-		     "value is not defined.",
-	"DATAOVERRUN: The amount of data returned by the endpoint exceeded\n" \
-		     "either the size of the maximum data packet allowed\n" \
-		     "from the endpoint (found in MaximumPacketSize field\n" \
-		     "of ED) or the remaining buffer size.",
-	"DATAUNDERRUN: The endpoint returned less than MaximumPacketSize\n" \
-		     "and that amount was not sufficient to fill the\n" \
-		     "specified buffer",
-	"reserved1",
-	"reserved2",
-	"BUFFEROVERRUN: During an IN, HC received data from endpoint faster\n" \
-		     "than it could be written to system memory",
-	"BUFFERUNDERRUN: During an OUT, HC could not retrieve data from\n" \
-		     "system memory fast enough to keep up with data USB " \
-		     "data rate.",
-	"NOT ACCESSED: This code is set by software before the TD is placed" \
-		     "on a list to be processed by the HC.(1)",
-	"NOT ACCESSED: This code is set by software before the TD is placed" \
-		     "on a list to be processed by the HC.(2)",
-};
-
-/* ED States */
-
-#define ED_NEW		0x00
-#define ED_UNLINK	0x01
-#define ED_OPER		0x02
-#define ED_DEL		0x04
-#define ED_URB_DEL	0x08
-
-/* usb_ohci_ed */
-struct ed {
-	__u32 hwINFO;
-	__u32 hwTailP;
-	__u32 hwHeadP;
-	__u32 hwNextED;
-
-	struct ed *ed_prev;
-	__u8 int_period;
-	__u8 int_branch;
-	__u8 int_load;
-	__u8 int_interval;
-	__u8 state;
-	__u8 type;
-	__u16 last_iso;
-	struct ed *ed_rm_list;
-
-	struct usb_device *usb_dev;
-	void *purb;
-	__u32 unused[2];
-} __attribute((aligned(16)));
-typedef struct ed ed_t;
-
-
-/* TD info field */
-#define TD_CC	    0xf0000000
-#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
-#define TD_EC	    0x0C000000
-#define TD_T	    0x03000000
-#define TD_T_DATA0  0x02000000
-#define TD_T_DATA1  0x03000000
-#define TD_T_TOGGLE 0x00000000
-#define TD_R	    0x00040000
-#define TD_DI	    0x00E00000
-#define TD_DI_SET(X) (((X) & 0x07)<< 21)
-#define TD_DP	    0x00180000
-#define TD_DP_SETUP 0x00000000
-#define TD_DP_IN    0x00100000
-#define TD_DP_OUT   0x00080000
-
-#define TD_ISO	    0x00010000
-#define TD_DEL	    0x00020000
-
-/* CC Codes */
-#define TD_CC_NOERROR	   0x00
-#define TD_CC_CRC	   0x01
-#define TD_CC_BITSTUFFING  0x02
-#define TD_CC_DATATOGGLEM  0x03
-#define TD_CC_STALL	   0x04
-#define TD_DEVNOTRESP	   0x05
-#define TD_PIDCHECKFAIL	   0x06
-#define TD_UNEXPECTEDPID   0x07
-#define TD_DATAOVERRUN	   0x08
-#define TD_DATAUNDERRUN	   0x09
-#define TD_BUFFEROVERRUN   0x0C
-#define TD_BUFFERUNDERRUN  0x0D
-#define TD_NOTACCESSED	   0x0F
-
-
-#define MAXPSW 1
-
-struct td {
-	__u32 hwINFO;
-	__u32 hwCBP;		/* Current Buffer Pointer */
-	__u32 hwNextTD;		/* Next TD Pointer */
-	__u32 hwBE;		/* Memory Buffer End Pointer */
-
-/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */
-	__u16 hwPSW[MAXPSW];
-/* #endif */
-	__u8 unused;
-	__u8 index;
-	struct ed *ed;
-	struct td *next_dl_td;
-	struct usb_device *usb_dev;
-	int transfer_len;
-	__u32 data;
-
-	__u32 unused2[2];
-} __attribute((aligned(32)));
-typedef struct td td_t;
-
-#define OHCI_ED_SKIP	(1 << 14)
-
-/*
- * The HCCA (Host Controller Communications Area) is a 256 byte
- * structure defined in the OHCI spec. that the host controller is
- * told the base address of.  It must be 256-byte aligned.
- */
-
-#define NUM_INTS 32	/* part of the OHCI standard */
-struct ohci_hcca {
-	__u32	int_table[NUM_INTS];	/* Interrupt ED table */
-#if defined(CONFIG_MPC5200)
-	__u16	pad1;			/* set to 0 on each frame_no change */
-	__u16	frame_no;		/* current frame number */
-#else
-	__u16	frame_no;		/* current frame number */
-	__u16	pad1;			/* set to 0 on each frame_no change */
-#endif
-	__u32	done_head;		/* info returned for an interrupt */
-	u8		reserved_for_hc[116];
-} __attribute((aligned(256)));
-
-
-/*
- * Maximum number of root hub ports.
- */
-#ifndef CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS
-# error "CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS undefined!"
-#endif
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O
- * region.  This is Memory Mapped I/O.	You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
- */
-struct ohci_regs {
-	/* control and status registers */
-	__u32	revision;
-	__u32	control;
-	__u32	cmdstatus;
-	__u32	intrstatus;
-	__u32	intrenable;
-	__u32	intrdisable;
-	/* memory pointers */
-	__u32	hcca;
-	__u32	ed_periodcurrent;
-	__u32	ed_controlhead;
-	__u32	ed_controlcurrent;
-	__u32	ed_bulkhead;
-	__u32	ed_bulkcurrent;
-	__u32	donehead;
-	/* frame counters */
-	__u32	fminterval;
-	__u32	fmremaining;
-	__u32	fmnumber;
-	__u32	periodicstart;
-	__u32	lsthresh;
-	/* Root hub ports */
-	struct	ohci_roothub_regs {
-		__u32	a;
-		__u32	b;
-		__u32	status;
-		__u32	portstatus[CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS];
-	} roothub;
-} __attribute((aligned(32)));
-
-/* Some EHCI controls */
-#define EHCI_USBCMD_OFF		0x20
-#define EHCI_USBCMD_HCRESET	(1 << 1)
-
-/* OHCI CONTROL AND STATUS REGISTER MASKS */
-
-/*
- * HcControl (control) register masks
- */
-#define OHCI_CTRL_CBSR	(3 << 0)	/* control/bulk service ratio */
-#define OHCI_CTRL_PLE	(1 << 2)	/* periodic list enable */
-#define OHCI_CTRL_IE	(1 << 3)	/* isochronous enable */
-#define OHCI_CTRL_CLE	(1 << 4)	/* control list enable */
-#define OHCI_CTRL_BLE	(1 << 5)	/* bulk list enable */
-#define OHCI_CTRL_HCFS	(3 << 6)	/* host controller functional state */
-#define OHCI_CTRL_IR	(1 << 8)	/* interrupt routing */
-#define OHCI_CTRL_RWC	(1 << 9)	/* remote wakeup connected */
-#define OHCI_CTRL_RWE	(1 << 10)	/* remote wakeup enable */
-
-/* pre-shifted values for HCFS */
-#	define OHCI_USB_RESET	(0 << 6)
-#	define OHCI_USB_RESUME	(1 << 6)
-#	define OHCI_USB_OPER	(2 << 6)
-#	define OHCI_USB_SUSPEND (3 << 6)
-
-/*
- * HcCommandStatus (cmdstatus) register masks
- */
-#define OHCI_HCR	(1 << 0)	/* host controller reset */
-#define OHCI_CLF	(1 << 1)	/* control list filled */
-#define OHCI_BLF	(1 << 2)	/* bulk list filled */
-#define OHCI_OCR	(1 << 3)	/* ownership change request */
-#define OHCI_SOC	(3 << 16)	/* scheduling overrun count */
-
-/*
- * masks used with interrupt registers:
- * HcInterruptStatus (intrstatus)
- * HcInterruptEnable (intrenable)
- * HcInterruptDisable (intrdisable)
- */
-#define OHCI_INTR_SO	(1 << 0)	/* scheduling overrun */
-#define OHCI_INTR_WDH	(1 << 1)	/* writeback of done_head */
-#define OHCI_INTR_SF	(1 << 2)	/* start frame */
-#define OHCI_INTR_RD	(1 << 3)	/* resume detect */
-#define OHCI_INTR_UE	(1 << 4)	/* unrecoverable error */
-#define OHCI_INTR_FNO	(1 << 5)	/* frame number overflow */
-#define OHCI_INTR_RHSC	(1 << 6)	/* root hub status change */
-#define OHCI_INTR_OC	(1 << 30)	/* ownership change */
-#define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
-
-
-/* Virtual Root HUB */
-struct virt_root_hub {
-	int devnum; /* Address of Root Hub endpoint */
-	void *dev;  /* was urb */
-	void *int_addr;
-	int send;
-	int interval;
-};
-
-/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
-
-/* destination of request */
-#define RH_INTERFACE		   0x01
-#define RH_ENDPOINT		   0x02
-#define RH_OTHER		   0x03
-
-#define RH_CLASS		   0x20
-#define RH_VENDOR		   0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS		0x0080
-#define RH_CLEAR_FEATURE	0x0100
-#define RH_SET_FEATURE		0x0300
-#define RH_SET_ADDRESS		0x0500
-#define RH_GET_DESCRIPTOR	0x0680
-#define RH_SET_DESCRIPTOR	0x0700
-#define RH_GET_CONFIGURATION	0x0880
-#define RH_SET_CONFIGURATION	0x0900
-#define RH_GET_STATE		0x0280
-#define RH_GET_INTERFACE	0x0A80
-#define RH_SET_INTERFACE	0x0B00
-#define RH_SYNC_FRAME		0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP		0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION	   0x00
-#define RH_PORT_ENABLE		   0x01
-#define RH_PORT_SUSPEND		   0x02
-#define RH_PORT_OVER_CURRENT	   0x03
-#define RH_PORT_RESET		   0x04
-#define RH_PORT_POWER		   0x08
-#define RH_PORT_LOW_SPEED	   0x09
-
-#define RH_C_PORT_CONNECTION	   0x10
-#define RH_C_PORT_ENABLE	   0x11
-#define RH_C_PORT_SUSPEND	   0x12
-#define RH_C_PORT_OVER_CURRENT	   0x13
-#define RH_C_PORT_RESET		   0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER	   0x00
-#define RH_C_HUB_OVER_CURRENT	   0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP	   0x00
-#define RH_ENDPOINT_STALL	   0x01
-
-#define RH_ACK			   0x01
-#define RH_REQ_ERR		   -1
-#define RH_NACK			   0x00
-
-
-/* OHCI ROOT HUB REGISTER MASKS */
-
-/* roothub.portstatus [i] bits */
-#define RH_PS_CCS	     0x00000001		/* current connect status */
-#define RH_PS_PES	     0x00000002		/* port enable status*/
-#define RH_PS_PSS	     0x00000004		/* port suspend status */
-#define RH_PS_POCI	     0x00000008		/* port over current indicator */
-#define RH_PS_PRS	     0x00000010		/* port reset status */
-#define RH_PS_PPS	     0x00000100		/* port power status */
-#define RH_PS_LSDA	     0x00000200		/* low speed device attached */
-#define RH_PS_CSC	     0x00010000		/* connect status change */
-#define RH_PS_PESC	     0x00020000		/* port enable status change */
-#define RH_PS_PSSC	     0x00040000		/* port suspend status change */
-#define RH_PS_OCIC	     0x00080000		/* over current indicator change */
-#define RH_PS_PRSC	     0x00100000		/* port reset status change */
-
-/* roothub.status bits */
-#define RH_HS_LPS	     0x00000001		/* local power status */
-#define RH_HS_OCI	     0x00000002		/* over current indicator */
-#define RH_HS_DRWE	     0x00008000		/* device remote wakeup enable */
-#define RH_HS_LPSC	     0x00010000		/* local power status change */
-#define RH_HS_OCIC	     0x00020000		/* over current indicator change */
-#define RH_HS_CRWE	     0x80000000		/* clear remote wakeup enable */
-
-/* roothub.b masks */
-#define RH_B_DR		0x0000ffff		/* device removable flags */
-#define RH_B_PPCM	0xffff0000		/* port power control mask */
-
-/* roothub.a masks */
-#define RH_A_NDP	(0xff << 0)		/* number of downstream ports */
-#define RH_A_PSM	(1 << 8)		/* power switching mode */
-#define RH_A_NPS	(1 << 9)		/* no power switching */
-#define RH_A_DT		(1 << 10)		/* device type (mbz) */
-#define RH_A_OCPM	(1 << 11)		/* over current protection mode */
-#define RH_A_NOCP	(1 << 12)		/* no over current protection */
-#define RH_A_POTPGT	(0xff << 24)		/* power on to power good time */
-
-/* urb */
-#define N_URB_TD 48
-typedef struct
-{
-	ed_t *ed;
-	__u16 length;	/* number of tds associated with this request */
-	__u16 td_cnt;	/* number of tds already serviced */
-	struct usb_device *dev;
-	int   state;
-	unsigned long pipe;
-	void *transfer_buffer;
-	int transfer_buffer_length;
-	int interval;
-	int actual_length;
-	int finished;
-	td_t *td[N_URB_TD];	/* list pointer to all corresponding TDs associated with this request */
-} urb_priv_t;
-#define URB_DEL 1
-
-/*
- * This is the full ohci controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-
-typedef struct ohci {
-	struct ohci_hcca *hcca;		/* hcca */
-	/*dma_addr_t hcca_dma;*/
-
-	int irq;
-	int disabled;			/* e.g. got a UE, we're hung */
-	int sleeping;
-	unsigned long flags;		/* for HC bugs */
-
-	struct ohci_regs *regs; /* OHCI controller's memory */
-
-	int ohci_int_load[32];	 /* load of the 32 Interrupt Chains (for load balancing)*/
-	ed_t *ed_rm_list[2];	 /* lists of all endpoints to be removed */
-	ed_t *ed_bulktail;	 /* last endpoint of bulk list */
-	ed_t *ed_controltail;	 /* last endpoint of control list */
-	int intrstatus;
-	__u32 hc_control;		/* copy of the hc control reg */
-	struct usb_device *dev[32];
-	struct virt_root_hub rh;
-
-	const char	*slot_name;
-} ohci_t;
-
-#define NUM_EDS 8		/* num of preallocated endpoint descriptors */
-
-struct ohci_device {
-	ed_t	ed[NUM_EDS];
-	int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe,
-		int interval, int load);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-td_t gtd[NUM_TD+1];
-/* pointers to aligned storage */
-td_t *ptd;
-
-/* TDs ... */
-static inline struct td *
-td_alloc (struct usb_device *usb_dev)
-{
-	int i;
-	struct td	*td;
-
-	td = NULL;
-	for (i = 0; i < NUM_TD; i++)
-	{
-		if (ptd[i].usb_dev == NULL)
-		{
-			td = &ptd[i];
-			td->usb_dev = usb_dev;
-			break;
-		}
-	}
-
-	return td;
-}
-
-static inline void
-ed_free (struct ed *ed)
-{
-	ed->usb_dev = NULL;
-}