drivers/usb: regorganisation

move to linux usb driver organisation

as following

drivers/usb/gadget
drivers/usb/host
drivers/usb/musb

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>

1 files changed, 0 insertions, 100 deletions

diff --git a/drivers/usb/usb_ehci_fsl.c b/drivers/usb/usb_ehci_fsl.c
deleted file mode 100644
index 81d5d21..0000000
--- a/drivers/usb/usb_ehci_fsl.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2008, Excito Elektronik i Sk=E5ne AB
- *
- * Author: Tor Krill tor@excito.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <usb.h>
-#include <mpc83xx.h>
-#include <asm/io.h>
-#include <asm/bitops.h>
-
-#include "usb_ehci.h"
-#include "usb_ehci_fsl.h"
-#include "usb_ehci_core.h"
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- *
- * Excerpts from linux ehci fsl driver.
- */
-int ehci_hcd_init(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	uint32_t addr, temp;
-
-	addr = (uint32_t)&(im->usb[0]);
-	hccr = (struct ehci_hccr *)(addr + FSL_SKIP_PCI);
-	hcor = (struct ehci_hcor *)((uint32_t) hccr +
-			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
-
-	/* Configure clock */
-	clrsetbits_be32(&(im->clk.sccr), MPC83XX_SCCR_USB_MASK,
-			MPC83XX_SCCR_USB_DRCM_11);
-
-	/* Confgure interface. */
-	temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
-	out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp
-		 | REFSEL_16MHZ | UTMI_PHY_EN);
-
-	/* Wait for clock to stabilize */
-	do {
-		temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
-		udelay(1000);
-	} while (!(temp & PHY_CLK_VALID));
-
-	/* Set to Host mode */
-	temp = in_le32((void *)(addr + FSL_SOC_USB_USBMODE));
-	out_le32((void *)(addr + FSL_SOC_USB_USBMODE), temp | CM_HOST);
-
-	out_be32((void *)(addr + FSL_SOC_USB_SNOOP1), SNOOP_SIZE_2GB);
-	out_be32((void *)(addr + FSL_SOC_USB_SNOOP2),
-		 0x80000000 | SNOOP_SIZE_2GB);
-
-	/* Init phy */
-	/* TODO: handle different phys? */
-	out_le32(&(hcor->or_portsc[0]), PORT_PTS_UTMI);
-
-	/* Enable interface. */
-	temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
-	out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp | USB_EN);
-
-	out_be32((void *)(addr + FSL_SOC_USB_PRICTRL), 0x0000000c);
-	out_be32((void *)(addr + FSL_SOC_USB_AGECNTTHRSH), 0x00000040);
-	out_be32((void *)(addr + FSL_SOC_USB_SICTRL), 0x00000001);
-
-	/* Enable interface. */
-	temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
-	out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp | USB_EN);
-
-	temp = in_le32((void *)(addr + FSL_SOC_USB_USBMODE));
-
-	return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(void)
-{
-	return 0;
-}