drivers/usb: regorganisation

move to linux usb driver organisation

as following

drivers/usb/gadget
drivers/usb/host
drivers/usb/musb

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>

1 files changed, 0 insertions, 194 deletions

diff --git a/drivers/usb/usb_ehci.h b/drivers/usb/usb_ehci.h
deleted file mode 100644
index b3c1d5d..0000000
--- a/drivers/usb/usb_ehci.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/*-
- * Copyright (c) 2007-2008, Juniper Networks, Inc.
- * Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef USB_EHCI_H
-#define USB_EHCI_H
-
-#if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS)
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#endif
-
-/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
-#define DeviceRequest \
-	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
-
-#define DeviceOutRequest \
-	((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
-
-#define InterfaceRequest \
-	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
-
-#define EndpointRequest \
-	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
-
-#define EndpointOutRequest \
-	((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
-
-/*
- * Register Space.
- */
-struct ehci_hccr {
-	uint32_t cr_capbase;
-#define HC_LENGTH(p)		(((p) >> 0) & 0x00ff)
-#define HC_VERSION(p)		(((p) >> 16) & 0xffff)
-	uint32_t cr_hcsparams;
-#define HCS_PPC(p)		((p) & (1 << 4))
-#define HCS_INDICATOR(p)	((p) & (1 << 16)) /* Port indicators */
-#define HCS_N_PORTS(p)		(((p) >> 0) & 0xf)
-	uint32_t cr_hccparams;
-	uint8_t cr_hcsp_portrt[8];
-} __attribute__ ((packed));
-
-struct ehci_hcor {
-	uint32_t or_usbcmd;
-#define CMD_PARK	(1 << 11)		/* enable "park" */
-#define CMD_PARK_CNT(c)	(((c) >> 8) & 3)	/* how many transfers to park */
-#define CMD_ASE		(1 << 5)		/* async schedule enable */
-#define CMD_LRESET	(1 << 7)		/* partial reset */
-#define CMD_IAAD	(1 << 5)		/* "doorbell" interrupt */
-#define CMD_PSE		(1 << 4)		/* periodic schedule enable */
-#define CMD_RESET	(1 << 1)		/* reset HC not bus */
-#define CMD_RUN		(1 << 0)		/* start/stop HC */
-	uint32_t or_usbsts;
-#define	STD_ASS		(1 << 15)
-#define STS_HALT	(1 << 12)
-	uint32_t or_usbintr;
-	uint32_t or_frindex;
-	uint32_t or_ctrldssegment;
-	uint32_t or_periodiclistbase;
-	uint32_t or_asynclistaddr;
-	uint32_t _reserved_[9];
-	uint32_t or_configflag;
-#define FLAG_CF		(1 << 0)	/* true:  we'll support "high speed" */
-	uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
-	uint32_t or_systune;
-} __attribute__ ((packed));
-
-#define USBMODE		0x68		/* USB Device mode */
-#define USBMODE_SDIS	(1 << 3)	/* Stream disable */
-#define USBMODE_BE	(1 << 2)	/* BE/LE endiannes select */
-#define USBMODE_CM_HC	(3 << 0)	/* host controller mode */
-#define USBMODE_CM_IDLE	(0 << 0)	/* idle state */
-
-/* Interface descriptor */
-struct usb_linux_interface_descriptor {
-	unsigned char	bLength;
-	unsigned char	bDescriptorType;
-	unsigned char	bInterfaceNumber;
-	unsigned char	bAlternateSetting;
-	unsigned char	bNumEndpoints;
-	unsigned char	bInterfaceClass;
-	unsigned char	bInterfaceSubClass;
-	unsigned char	bInterfaceProtocol;
-	unsigned char	iInterface;
-} __attribute__ ((packed));
-
-/* Configuration descriptor information.. */
-struct usb_linux_config_descriptor {
-	unsigned char	bLength;
-	unsigned char	bDescriptorType;
-	unsigned short	wTotalLength;
-	unsigned char	bNumInterfaces;
-	unsigned char	bConfigurationValue;
-	unsigned char	iConfiguration;
-	unsigned char	bmAttributes;
-	unsigned char	MaxPower;
-} __attribute__ ((packed));
-
-#if defined CONFIG_EHCI_DESC_BIG_ENDIAN
-#define	ehci_readl(x)		(*((volatile u32 *)(x)))
-#define ehci_writel(a, b)	(*((volatile u32 *)(a)) = ((volatile u32)b))
-#else
-#define ehci_readl(x)		cpu_to_le32((*((volatile u32 *)(x))))
-#define ehci_writel(a, b)	(*((volatile u32 *)(a)) = \
-					cpu_to_le32(((volatile u32)b)))
-#endif
-
-#if defined CONFIG_EHCI_MMIO_BIG_ENDIAN
-#define hc32_to_cpu(x)		be32_to_cpu((x))
-#define cpu_to_hc32(x)		cpu_to_be32((x))
-#else
-#define hc32_to_cpu(x)		le32_to_cpu((x))
-#define cpu_to_hc32(x)		cpu_to_le32((x))
-#endif
-
-#define EHCI_PS_WKOC_E		(1 << 22)	/* RW wake on over current */
-#define EHCI_PS_WKDSCNNT_E	(1 << 21)	/* RW wake on disconnect */
-#define EHCI_PS_WKCNNT_E	(1 << 20)	/* RW wake on connect */
-#define EHCI_PS_PO		(1 << 13)	/* RW port owner */
-#define EHCI_PS_PP		(1 << 12)	/* RW,RO port power */
-#define EHCI_PS_LS		(3 << 10)	/* RO line status */
-#define EHCI_PS_PR		(1 << 8)	/* RW port reset */
-#define EHCI_PS_SUSP		(1 << 7)	/* RW suspend */
-#define EHCI_PS_FPR		(1 << 6)	/* RW force port resume */
-#define EHCI_PS_OCC		(1 << 5)	/* RWC over current change */
-#define EHCI_PS_OCA		(1 << 4)	/* RO over current active */
-#define EHCI_PS_PEC		(1 << 3)	/* RWC port enable change */
-#define EHCI_PS_PE		(1 << 2)	/* RW port enable */
-#define EHCI_PS_CSC		(1 << 1)	/* RWC connect status change */
-#define EHCI_PS_CS		(1 << 0)	/* RO connect status */
-#define EHCI_PS_CLEAR		(EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC)
-
-#define EHCI_PS_IS_LOWSPEED(x)	(((x) & EHCI_PS_LS) == (1 << 10))
-
-/*
- * Schedule Interface Space.
- *
- * IMPORTANT: Software must ensure that no interface data structure
- * reachable by the EHCI host controller spans a 4K page boundary!
- *
- * Periodic transfers (i.e. isochronous and interrupt transfers) are
- * not supported.
- */
-
-/* Queue Element Transfer Descriptor (qTD). */
-struct qTD {
-	uint32_t qt_next;
-#define	QT_NEXT_TERMINATE	1
-	uint32_t qt_altnext;
-	uint32_t qt_token;
-	uint32_t qt_buffer[5];
-};
-
-/* Queue Head (QH). */
-struct QH {
-	uint32_t qh_link;
-#define	QH_LINK_TERMINATE	1
-#define	QH_LINK_TYPE_ITD	0
-#define	QH_LINK_TYPE_QH		2
-#define	QH_LINK_TYPE_SITD	4
-#define	QH_LINK_TYPE_FSTN	6
-	uint32_t qh_endpt1;
-	uint32_t qh_endpt2;
-	uint32_t qh_curtd;
-	struct qTD qh_overlay;
-	/*
-	 * Add dummy fill value to make the size of this struct
-	 * aligned to 32 bytes
-	 */
-	uint8_t fill[16];
-};
-
-/* Low level init functions */
-int ehci_hcd_init(void);
-int ehci_hcd_stop(void);
-
-#endif /* USB_EHCI_H */