usb: omap: Move the usb phy code to the usb/phy directory

Moving the usb/phy code from xhci-omap to the usb/phy directory
and moving the associated phy code over to the new file.

Newer TI processors adding xHCI support will have different PHY configurations
so therefore abstracting this code away will prevent messing around with the
xhci-omap file itself.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

2 files changed, 198 insertions, 0 deletions

diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index f93121a..5beec78 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -10,6 +10,7 @@ include $(TOPDIR)/config.mk
 LIB	:= $(obj)libusb_phy.o
 
 COBJS-$(CONFIG_TWL4030_USB) += twl4030.o
+COBJS-$(CONFIG_OMAP_USB_PHY) += omap_usb_phy.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c
new file mode 100644
index 0000000..ed727bf
--- /dev/null
+++ b/drivers/usb/phy/omap_usb_phy.c
@@ -0,0 +1,197 @@
+/*
+ * OMAP USB PHY Support
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm-generic/errno.h>
+#include <asm/omap_common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+
+#include <linux/compat.h>
+#include <linux/usb/dwc3.h>
+#include <linux/usb/xhci-omap.h>
+
+#include "../host/xhci.h"
+
+struct usb_dpll_params {
+	u16	m;
+	u8	n;
+	u8	freq:3;
+	u8	sd;
+	u32	mf;
+};
+
+#define	NUM_USB_CLKS		6
+
+static struct usb_dpll_params omap_usb3_dpll_params[NUM_USB_CLKS] = {
+	{1250, 5, 4, 20, 0},		/* 12 MHz */
+	{3125, 20, 4, 20, 0},		/* 16.8 MHz */
+	{1172, 8, 4, 20, 65537},	/* 19.2 MHz */
+	{1250, 12, 4, 20, 0},		/* 26 MHz */
+	{3125, 47, 4, 20, 92843},	/* 38.4 MHz */
+	{1000, 7, 4, 10, 0},        /* 20 MHz */
+};
+
+static void omap_usb_dpll_relock(struct omap_usb3_phy *phy_regs)
+{
+	u32 val;
+
+	writel(SET_PLL_GO, &phy_regs->pll_go);
+	do {
+		val = readl(&phy_regs->pll_status);
+			if (val & PLL_LOCK)
+				break;
+	} while (1);
+}
+
+static void omap_usb_dpll_lock(struct omap_usb3_phy *phy_regs)
+{
+	u32 clk_index = get_sys_clk_index();
+	u32 val;
+
+	val = readl(&phy_regs->pll_config_1);
+	val &= ~PLL_REGN_MASK;
+	val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT;
+	writel(val, &phy_regs->pll_config_1);
+
+	val = readl(&phy_regs->pll_config_2);
+	val &= ~PLL_SELFREQDCO_MASK;
+	val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT;
+	writel(val, &phy_regs->pll_config_2);
+
+	val = readl(&phy_regs->pll_config_1);
+	val &= ~PLL_REGM_MASK;
+	val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT;
+	writel(val, &phy_regs->pll_config_1);
+
+	val = readl(&phy_regs->pll_config_4);
+	val &= ~PLL_REGM_F_MASK;
+	val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT;
+	writel(val, &phy_regs->pll_config_4);
+
+	val = readl(&phy_regs->pll_config_3);
+	val &= ~PLL_SD_MASK;
+	val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT;
+	writel(val, &phy_regs->pll_config_3);
+
+	omap_usb_dpll_relock(phy_regs);
+}
+
+static void usb3_phy_partial_powerup(struct omap_usb3_phy *phy_regs)
+{
+	u32 rate = get_sys_clk_freq()/1000000;
+	u32 val;
+
+	val = readl((*ctrl)->control_phy_power_usb);
+	val &= ~(USB3_PWRCTL_CLK_CMD_MASK | USB3_PWRCTL_CLK_FREQ_MASK);
+	val |= (USB3_PHY_PARTIAL_RX_POWERON | USB3_PHY_TX_RX_POWERON);
+	val |= rate << USB3_PWRCTL_CLK_FREQ_SHIFT;
+
+	writel(val, (*ctrl)->control_phy_power_usb);
+}
+
+void usb3_phy_power(int on)
+{
+	u32 val;
+
+	val = readl((*ctrl)->control_phy_power_usb);
+	if (on) {
+		val &= ~USB3_PWRCTL_CLK_CMD_MASK;
+		val |= USB3_PHY_TX_RX_POWERON;
+	} else {
+		val &= (~USB3_PWRCTL_CLK_CMD_MASK & ~USB3_PHY_TX_RX_POWERON);
+	}
+
+	writel(val, (*ctrl)->control_phy_power_usb);
+}
+
+void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs)
+{
+	omap_usb_dpll_lock(phy_regs);
+
+	usb3_phy_partial_powerup(phy_regs);
+	/*
+	 * Give enough time for the PHY to partially power-up before
+	 * powering it up completely. delay value suggested by the HW
+	 * team.
+	 */
+	mdelay(100);
+	usb3_phy_power(1);
+}
+
+void omap_enable_phy_clocks(struct omap_xhci *omap)
+{
+	u32	val;
+
+	/* Setting OCP2SCP1 register */
+	setbits_le32((*prcm)->cm_l3init_ocp2scp1_clkctrl,
+		     OCP2SCP1_CLKCTRL_MODULEMODE_HW);
+
+	/* Turn on 32K AON clk */
+	setbits_le32((*prcm)->cm_coreaon_usb_phy_core_clkctrl,
+		     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+
+	/* Setting CM_L3INIT_CLKSTCTRL to 0x0 i.e NO sleep */
+	writel(0x0, (*prcm)->cm_l3init_clkstctrl);
+
+	val = (USBOTGSS_DMADISABLE |
+			USBOTGSS_STANDBYMODE_SMRT_WKUP |
+			USBOTGSS_IDLEMODE_NOIDLE);
+	writel(val, &omap->otg_wrapper->sysconfig);
+
+	/* Clear the utmi OTG status */
+	val = readl(&omap->otg_wrapper->utmi_otg_status);
+	writel(val, &omap->otg_wrapper->utmi_otg_status);
+
+	/* Enable interrupts */
+	writel(USBOTGSS_COREIRQ_EN, &omap->otg_wrapper->irqenable_set_0);
+	val = (USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN |
+			USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN |
+			USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN	|
+			USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN	|
+			USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN	|
+			USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN	|
+			USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN |
+			USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN |
+			USBOTGSS_IRQ_SET_1_OEVT_EN);
+	writel(val, &omap->otg_wrapper->irqenable_set_1);
+
+	/* Clear the IRQ status */
+	val = readl(&omap->otg_wrapper->irqstatus_1);
+	writel(val, &omap->otg_wrapper->irqstatus_1);
+	val = readl(&omap->otg_wrapper->irqstatus_0);
+	writel(val, &omap->otg_wrapper->irqstatus_0);
+
+	/* Enable the USB OTG Super speed clocks */
+	val = (OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW);
+	setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, val);
+
+};
+
+void omap_reset_usb_phy(struct dwc3 *dwc3_reg)
+{
+	/* Assert USB3 PHY reset */
+	setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
+
+	/* Assert USB2 PHY reset */
+	setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
+
+	mdelay(100);
+
+	/* Clear USB3 PHY reset */
+	clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
+
+	/* Clear USB2 PHY reset */
+	clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
+
+}
+