summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-tegra.c
diff options
context:
space:
mode:
authorStephen Warren <swarren@nvidia.com>2014-04-30 15:09:56 -0600
committerMarek Vasut <marex@denx.de>2014-05-15 00:21:17 +0200
commit2d34151f7501ddaa599897f0d89ad576126b03eb (patch)
treee52cac31da3f4b5daad4aa53884c34ca4ea24233 /drivers/usb/host/ehci-tegra.c
parent9b20fe6f1affdfc7441481dc0acb55eadd80134f (diff)
downloadu-boot-imx-2d34151f7501ddaa599897f0d89ad576126b03eb.zip
u-boot-imx-2d34151f7501ddaa599897f0d89ad576126b03eb.tar.gz
u-boot-imx-2d34151f7501ddaa599897f0d89ad576126b03eb.tar.bz2
usb: tegra: refactor PHY type selection
Both init_{utmi,ulpi}_usb_controller() have nearly identical code for PHY type selection. Pull this out into a common function to remove the duplication. Cc: Jim Lin <jilin@nvidia.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
Diffstat (limited to 'drivers/usb/host/ehci-tegra.c')
-rw-r--r--drivers/usb/host/ehci-tegra.c58
1 files changed, 28 insertions, 30 deletions
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 9a9a127..55a546e 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -293,6 +293,32 @@ static const unsigned *get_pll_timing(void)
return timing;
}
+/* select the PHY to use with a USB controller */
+static void init_phy_mux(struct fdt_usb *config, uint pts)
+{
+ struct usb_ctlr *usbctlr = config->reg;
+
+#if defined(CONFIG_TEGRA20)
+ if (config->periph_id == PERIPH_ID_USBD) {
+ clrsetbits_le32(&usbctlr->port_sc1, PTS1_MASK,
+ PTS_UTMI << PTS1_SHIFT);
+ clrbits_le32(&usbctlr->port_sc1, STS1);
+ } else {
+ clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
+ PTS_UTMI << PTS_SHIFT);
+ clrbits_le32(&usbctlr->port_sc1, STS);
+ }
+#else
+ /* Set to Host mode after Controller Reset was done */
+ clrsetbits_le32(&usbctlr->usb_mode, USBMODE_CM_HC,
+ USBMODE_CM_HC);
+ /* Select PHY interface after setting host mode */
+ clrsetbits_le32(&usbctlr->hostpc1_devlc, PTS_MASK,
+ pts << PTS_SHIFT);
+ clrbits_le32(&usbctlr->hostpc1_devlc, STS);
+#endif
+}
+
/* set up the UTMI USB controller with the parameters provided */
static int init_utmi_usb_controller(struct fdt_usb *config)
{
@@ -485,25 +511,7 @@ static int init_utmi_usb_controller(struct fdt_usb *config)
clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1);
/* Select UTMI parallel interface */
-#if defined(CONFIG_TEGRA20)
- if (config->periph_id == PERIPH_ID_USBD) {
- clrsetbits_le32(&usbctlr->port_sc1, PTS1_MASK,
- PTS_UTMI << PTS1_SHIFT);
- clrbits_le32(&usbctlr->port_sc1, STS1);
- } else {
- clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
- PTS_UTMI << PTS_SHIFT);
- clrbits_le32(&usbctlr->port_sc1, STS);
- }
-#else
- /* Set to Host mode after Controller Reset was done */
- clrsetbits_le32(&usbctlr->usb_mode, USBMODE_CM_HC,
- USBMODE_CM_HC);
- /* Select PHY interface after setting host mode */
- clrsetbits_le32(&usbctlr->hostpc1_devlc, PTS_MASK,
- PTS_UTMI << PTS_SHIFT);
- clrbits_le32(&usbctlr->hostpc1_devlc, STS);
-#endif
+ init_phy_mux(config, PTS_UTMI);
/* Deassert power down state */
clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN |
@@ -561,17 +569,7 @@ static int init_ulpi_usb_controller(struct fdt_usb *config)
ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP);
/* Select ULPI parallel interface */
-#if defined(CONFIG_TEGRA20)
- clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
- PTS_ULPI << PTS_SHIFT);
-#else
- /* Set to Host mode after Controller Reset was done */
- clrsetbits_le32(&usbctlr->usb_mode, USBMODE_CM_HC,
- USBMODE_CM_HC);
- /* Select PHY interface after setting host mode */
- clrsetbits_le32(&usbctlr->hostpc1_devlc, PTS_MASK,
- PTS_ULPI << PTS_SHIFT);
-#endif
+ init_phy_mux(config, PTS_ULPI);
/* enable ULPI transceiver */
setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB);