diff options
author | Stefan Agner <stefan.agner@toradex.com> | 2016-07-13 00:25:37 -0700 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2016-07-19 19:52:14 +0200 |
commit | 9a88180bfbb6ee7b2fba5516391ff0e611794de5 (patch) | |
tree | e5d80891945cf687fa276d29aa23d03b85ec1c0c /drivers/usb/host/ehci-mx6.c | |
parent | 2deebe2481c4a193c3c02e0a56b0b43039bcecb7 (diff) | |
download | u-boot-imx-9a88180bfbb6ee7b2fba5516391ff0e611794de5.zip u-boot-imx-9a88180bfbb6ee7b2fba5516391ff0e611794de5.tar.gz u-boot-imx-9a88180bfbb6ee7b2fba5516391ff0e611794de5.tar.bz2 |
usb: ehci-mx6: configure power polarity in usb_power_config
USBNC_n_CTRL1 bit 9 actually controls the power pin polarity.
Rename UCTRL_PM to align reference manual and set the bit in
the appropriate callback usb_power_config.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Diffstat (limited to 'drivers/usb/host/ehci-mx6.c')
-rw-r--r-- | drivers/usb/host/ehci-mx6.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 069f116..277f461 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -49,7 +49,7 @@ #define USBNC_OFFSET 0x200 #define USBNC_PHYSTATUS_ID_DIG (1 << 4) /* otg_id status */ #define USBNC_PHYCFG2_ACAENB (1 << 4) /* otg_id detection enable */ -#define UCTRL_PM (1 << 9) /* OTG Power Mask */ +#define UCTRL_PWR_POL (1 << 9) /* OTG Polarity of Power Pin */ #define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */ #define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */ @@ -207,12 +207,16 @@ static void usb_power_config(int index) struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR + (0x10000 * index) + USBNC_OFFSET); void __iomem *phy_cfg2 = (void __iomem *)(&usbnc->phy_cfg2); + void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl1); /* * Clear the ACAENB to enable usb_otg_id detection, * otherwise it is the ACA detection enabled. */ clrbits_le32(phy_cfg2, USBNC_PHYCFG2_ACAENB); + + /* Set power polarity to high active */ + setbits_le32(ctrl, UCTRL_PWR_POL); } int usb_phy_mode(int port) @@ -250,11 +254,7 @@ static void usb_oc_config(int index) setbits_le32(ctrl, UCTRL_OVER_CUR_POL); #endif -#if defined(CONFIG_MX6) setbits_le32(ctrl, UCTRL_OVER_CUR_DIS); -#elif defined(CONFIG_MX7) - setbits_le32(ctrl, UCTRL_OVER_CUR_DIS | UCTRL_PM); -#endif } /** |