summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.m@jp.panasonic.com>2014-07-30 19:11:41 +0900
committerTom Rini <trini@ti.com>2014-08-09 11:17:04 -0400
commit8ac22a60e29c4d0925e3d640a3607eabb2732b26 (patch)
treed9c43e2208f31b56ea3634397a158877aa2b0584 /drivers/usb/gadget
parent0596d35d80f5090440bd9a2a2beaacb268ff59c0 (diff)
downloadu-boot-imx-8ac22a60e29c4d0925e3d640a3607eabb2732b26.zip
u-boot-imx-8ac22a60e29c4d0925e3d640a3607eabb2732b26.tar.gz
u-boot-imx-8ac22a60e29c4d0925e3d640a3607eabb2732b26.tar.bz2
omap: clean-up dead configs
The following configs are not defined at all. - CONFIG_OMAP1510 - CONFIG_OMAP_1510P1 - CONFIG_OMAP_SX1 - CONFIG_OMAP3_DMA - CONFIG_OMAP3_ZOOM2 - CONFIG_OMAP_INNOVATOR Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r--drivers/usb/gadget/Makefile1
-rw-r--r--drivers/usb/gadget/omap1510_udc.c49
2 files changed, 0 insertions, 50 deletions
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 66becdc..4eea907 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -31,7 +31,6 @@ ifdef CONFIG_USB_DEVICE
obj-y += core.o
obj-y += ep0.o
obj-$(CONFIG_DW_UDC) += designware_udc.o
-obj-$(CONFIG_OMAP1510) += omap1510_udc.o
obj-$(CONFIG_OMAP1610) += omap1510_udc.o
obj-$(CONFIG_MPC885_FAMILY) += mpc8xx_udc.o
obj-$(CONFIG_CPU_PXA27X) += pxa27x_udc.o
diff --git a/drivers/usb/gadget/omap1510_udc.c b/drivers/usb/gadget/omap1510_udc.c
index bdc1b88..959df8c 100644
--- a/drivers/usb/gadget/omap1510_udc.c
+++ b/drivers/usb/gadget/omap1510_udc.c
@@ -15,9 +15,6 @@
#include <common.h>
#include <asm/io.h>
-#ifdef CONFIG_OMAP_SX1
-#include <i2c.h>
-#endif
#include <usbdevice.h>
#include <usb/omap1510_udc.h>
#include <usb/udc.h>
@@ -1097,20 +1094,6 @@ int udc_init (void)
outw ((1 << 4) | (1 << 5), CLOCK_CTRL);
UDCREG (CLOCK_CTRL);
-#ifdef CONFIG_OMAP1510
- /* This code was originally implemented for OMAP1510 and
- * therefore is only applicable for OMAP1510 boards. For
- * OMAP5912 or OMAP16xx the register APLL_CTRL does not
- * exist and DPLL_CTRL is already configured.
- */
-
- /* Set and check APLL */
- outw (0x0008, APLL_CTRL);
- UDCREG (APLL_CTRL);
- /* Set and check DPLL */
- outw (0x2210, DPLL_CTRL);
- UDCREG (DPLL_CTRL);
-#endif
/* Set and check SOFT
* The below line of code has been changed to perform a
* read-modify-write instead of a simple write for
@@ -1124,44 +1107,12 @@ int udc_init (void)
/* Print banner with device revision */
udc_rev = inw (UDC_REV) & 0xff;
-#ifdef CONFIG_OMAP1510
- printf ("USB: TI OMAP1510 USB function module rev %d.%d\n",
- udc_rev >> 4, udc_rev & 0xf);
-#endif
#ifdef CONFIG_OMAP1610
printf ("USB: TI OMAP5912 USB function module rev %d.%d\n",
udc_rev >> 4, udc_rev & 0xf);
#endif
-#ifdef CONFIG_OMAP_SX1
- i2c_read (0x32, 0x04, 1, &value, 1);
- value |= 0x04;
- i2c_write (0x32, 0x04, 1, &value, 1);
-
- i2c_read (0x32, 0x03, 1, &value, 1);
- value |= 0x01;
- i2c_write (0x32, 0x03, 1, &value, 1);
-
- gpio = inl(GPIO_PIN_CONTROL_REG);
- gpio |= 0x0002; /* A_IRDA_OFF */
- gpio |= 0x0800; /* A_SWITCH */
- gpio |= 0x8000; /* A_USB_ON */
- outl (gpio, GPIO_PIN_CONTROL_REG);
-
- gpio = inl(GPIO_DIR_CONTROL_REG);
- gpio &= ~0x0002; /* A_IRDA_OFF */
- gpio &= ~0x0800; /* A_SWITCH */
- gpio &= ~0x8000; /* A_USB_ON */
- outl (gpio, GPIO_DIR_CONTROL_REG);
-
- gpio = inl(GPIO_DATA_OUTPUT_REG);
- gpio |= 0x0002; /* A_IRDA_OFF */
- gpio &= ~0x0800; /* A_SWITCH */
- gpio &= ~0x8000; /* A_USB_ON */
- outl (gpio, GPIO_DATA_OUTPUT_REG);
-#endif
-
/* The VBUS_MODE bit selects whether VBUS detection is done via
* software (1) or hardware (0). When software detection is
* selected, VBUS_CTRL selects whether USB is not connected (0)