Integrate USB gadget layer and USB CDC driver layer

Derived from Linux kernel 2.6.27

Signed-off-by: Thomas Smits <ts.smits@gmail.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>

1 files changed, 306 insertions, 0 deletions

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
new file mode 100644
index 0000000..c7fad39
--- /dev/null
+++ b/drivers/usb/gadget/epautoconf.c
@@ -0,0 +1,306 @@
+/*
+ * epautoconf.c -- endpoint autoconfiguration for usb gadget drivers
+ *
+ * Copyright (C) 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Ported to U-boot by: Thomas Smits <ts.smits@gmail.com> and
+ *                      Remy Bohmer <linux@bohmer.net>
+ */
+
+#include <common.h>
+#include <linux/usb/ch9.h>
+#include <asm/errno.h>
+#include <linux/usb/gadget.h>
+#include "gadget_chips.h"
+
+#define isdigit(c)      ('0' <= (c) && (c) <= '9')
+
+/* we must assign addresses for configurable endpoints (like net2280) */
+static unsigned epnum;
+
+// #define MANY_ENDPOINTS
+#ifdef MANY_ENDPOINTS
+/* more than 15 configurable endpoints */
+static unsigned in_epnum;
+#endif
+
+
+/*
+ * This should work with endpoints from controller drivers sharing the
+ * same endpoint naming convention.  By example:
+ *
+ *	- ep1, ep2, ... address is fixed, not direction or type
+ *	- ep1in, ep2out, ... address and direction are fixed, not type
+ *	- ep1-bulk, ep2-bulk, ... address and type are fixed, not direction
+ *	- ep1in-bulk, ep2out-iso, ... all three are fixed
+ *	- ep-* ... no functionality restrictions
+ *
+ * Type suffixes are "-bulk", "-iso", or "-int".  Numbers are decimal.
+ * Less common restrictions are implied by gadget_is_*().
+ *
+ * NOTE:  each endpoint is unidirectional, as specified by its USB
+ * descriptor; and isn't specific to a configuration or altsetting.
+ */
+static int
+ep_matches (
+	struct usb_gadget		*gadget,
+	struct usb_ep			*ep,
+	struct usb_endpoint_descriptor	*desc
+)
+{
+	u8		type;
+	const char	*tmp;
+	u16		max;
+
+	/* endpoint already claimed? */
+	if (NULL != ep->driver_data)
+		return 0;
+
+	/* only support ep0 for portable CONTROL traffic */
+	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	if (USB_ENDPOINT_XFER_CONTROL == type)
+		return 0;
+
+	/* some other naming convention */
+	if ('e' != ep->name[0])
+		return 0;
+
+	/* type-restriction:  "-iso", "-bulk", or "-int".
+	 * direction-restriction:  "in", "out".
+	 */
+	if ('-' != ep->name[2]) {
+		tmp = strrchr (ep->name, '-');
+		if (tmp) {
+			switch (type) {
+			case USB_ENDPOINT_XFER_INT:
+				/* bulk endpoints handle interrupt transfers,
+				 * except the toggle-quirky iso-synch kind
+				 */
+				if ('s' == tmp[2])	// == "-iso"
+					return 0;
+				/* for now, avoid PXA "interrupt-in";
+				 * it's documented as never using DATA1.
+				 */
+				if (gadget_is_pxa (gadget)
+						&& 'i' == tmp [1])
+					return 0;
+				break;
+			case USB_ENDPOINT_XFER_BULK:
+				if ('b' != tmp[1])	// != "-bulk"
+					return 0;
+				break;
+			case USB_ENDPOINT_XFER_ISOC:
+				if ('s' != tmp[2])	// != "-iso"
+					return 0;
+			}
+		} else {
+			tmp = ep->name + strlen (ep->name);
+		}
+
+		/* direction-restriction:  "..in-..", "out-.." */
+		tmp--;
+		if (!isdigit (*tmp)) {
+			if (desc->bEndpointAddress & USB_DIR_IN) {
+				if ('n' != *tmp)
+					return 0;
+			} else {
+				if ('t' != *tmp)
+					return 0;
+			}
+		}
+	}
+
+	/* endpoint maxpacket size is an input parameter, except for bulk
+	 * where it's an output parameter representing the full speed limit.
+	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.
+	 */
+	max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
+	switch (type) {
+	case USB_ENDPOINT_XFER_INT:
+		/* INT:  limit 64 bytes full speed, 1024 high speed */
+		if (!gadget->is_dualspeed && max > 64)
+			return 0;
+		/* FALLTHROUGH */
+
+	case USB_ENDPOINT_XFER_ISOC:
+		/* ISO:  limit 1023 bytes full speed, 1024 high speed */
+		if (ep->maxpacket < max)
+			return 0;
+		if (!gadget->is_dualspeed && max > 1023)
+			return 0;
+
+		/* BOTH:  "high bandwidth" works only at high speed */
+		if ((desc->wMaxPacketSize & __constant_cpu_to_le16(3<<11))) {
+			if (!gadget->is_dualspeed)
+				return 0;
+			/* configure your hardware with enough buffering!! */
+		}
+		break;
+	}
+
+	/* MATCH!! */
+
+	/* report address */
+	if (isdigit (ep->name [2])) {
+		u8	num = simple_strtol (&ep->name [2], NULL, 10);
+		desc->bEndpointAddress |= num;
+#ifdef	MANY_ENDPOINTS
+	} else if (desc->bEndpointAddress & USB_DIR_IN) {
+		if (++in_epnum > 15)
+			return 0;
+		desc->bEndpointAddress = USB_DIR_IN | in_epnum;
+#endif
+	} else {
+		if (++epnum > 15)
+			return 0;
+		desc->bEndpointAddress |= epnum;
+	}
+
+	/* report (variable) full speed bulk maxpacket */
+	if (USB_ENDPOINT_XFER_BULK == type) {
+		int size = ep->maxpacket;
+
+		/* min() doesn't work on bitfields with gcc-3.5 */
+		if (size > 64)
+			size = 64;
+		desc->wMaxPacketSize = cpu_to_le16(size);
+	}
+	return 1;
+}
+
+static struct usb_ep *
+find_ep (struct usb_gadget *gadget, const char *name)
+{
+	struct usb_ep	*ep;
+
+	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+		if (0 == strcmp (ep->name, name))
+			return ep;
+	}
+	return NULL;
+}
+
+/**
+ * usb_ep_autoconfig - choose an endpoint matching the descriptor
+ * @gadget: The device to which the endpoint must belong.
+ * @desc: Endpoint descriptor, with endpoint direction and transfer mode
+ *	initialized.  For periodic transfers, the maximum packet
+ *	size must also be initialized.  This is modified on success.
+ *
+ * By choosing an endpoint to use with the specified descriptor, this
+ * routine simplifies writing gadget drivers that work with multiple
+ * USB device controllers.  The endpoint would be passed later to
+ * usb_ep_enable(), along with some descriptor.
+ *
+ * That second descriptor won't always be the same as the first one.
+ * For example, isochronous endpoints can be autoconfigured for high
+ * bandwidth, and then used in several lower bandwidth altsettings.
+ * Also, high and full speed descriptors will be different.
+ *
+ * Be sure to examine and test the results of autoconfiguration on your
+ * hardware.  This code may not make the best choices about how to use the
+ * USB controller, and it can't know all the restrictions that may apply.
+ * Some combinations of driver and hardware won't be able to autoconfigure.
+ *
+ * On success, this returns an un-claimed usb_ep, and modifies the endpoint
+ * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
+ * is initialized as if the endpoint were used at full speed.  To prevent
+ * the endpoint from being returned by a later autoconfig call, claim it
+ * by assigning ep->driver_data to some non-null value.
+ *
+ * On failure, this returns a null endpoint descriptor.
+ */
+struct usb_ep * usb_ep_autoconfig (
+	struct usb_gadget		*gadget,
+	struct usb_endpoint_descriptor	*desc
+)
+{
+	struct usb_ep	*ep;
+	u8		type;
+
+	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* First, apply chip-specific "best usage" knowledge.
+	 * This might make a good usb_gadget_ops hook ...
+	 */
+	if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) {
+		/* ep-e, ep-f are PIO with only 64 byte fifos */
+		ep = find_ep (gadget, "ep-e");
+		if (ep && ep_matches (gadget, ep, desc))
+			return ep;
+		ep = find_ep (gadget, "ep-f");
+		if (ep && ep_matches (gadget, ep, desc))
+			return ep;
+
+	} else if (gadget_is_goku (gadget)) {
+		if (USB_ENDPOINT_XFER_INT == type) {
+			/* single buffering is enough */
+			ep = find_ep (gadget, "ep3-bulk");
+			if (ep && ep_matches (gadget, ep, desc))
+				return ep;
+		} else if (USB_ENDPOINT_XFER_BULK == type
+				&& (USB_DIR_IN & desc->bEndpointAddress)) {
+			/* DMA may be available */
+			ep = find_ep (gadget, "ep2-bulk");
+			if (ep && ep_matches (gadget, ep, desc))
+				return ep;
+		}
+
+	} else if (gadget_is_sh (gadget) && USB_ENDPOINT_XFER_INT == type) {
+		/* single buffering is enough; maybe 8 byte fifo is too */
+		ep = find_ep (gadget, "ep3in-bulk");
+		if (ep && ep_matches (gadget, ep, desc))
+			return ep;
+
+	} else if (gadget_is_mq11xx (gadget) && USB_ENDPOINT_XFER_INT == type) {
+		ep = find_ep (gadget, "ep1-bulk");
+		if (ep && ep_matches (gadget, ep, desc))
+			return ep;
+	}
+
+	/* Second, look at endpoints until an unclaimed one looks usable */
+	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+		if (ep_matches (gadget, ep, desc))
+			return ep;
+	}
+
+	/* Fail */
+	return NULL;
+}
+
+/**
+ * usb_ep_autoconfig_reset - reset endpoint autoconfig state
+ * @gadget: device for which autoconfig state will be reset
+ *
+ * Use this for devices where one configuration may need to assign
+ * endpoint resources very differently from the next one.  It clears
+ * state such as ep->driver_data and the record of assigned endpoints
+ * used by usb_ep_autoconfig().
+ */
+void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+{
+	struct usb_ep	*ep;
+
+	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+		ep->driver_data = NULL;
+	}
+#ifdef	MANY_ENDPOINTS
+	in_epnum = 0;
+#endif
+	epnum = 0;
+}
+