usb: ci_udc: complete ep0 direction handling

handle_setup() currently assumes that the response to a Setup transaction
will be an OUT transaction, and any subsequent packet (if any) will be an
IN transaction. This appears to be valid in many cases; both USB
enumeration and Mass Storage work OK with this restriction. However, DFU
uses ep0 to transfer data in both directions. This renders the assumption
invalid; when sending data from device to host, the Data Stage is an IN
transaction, and the Status Stage is an OUT transaction. Enhance
handle_setup() to deduce the correct direction for the USB transactions
based on Setup transaction data.

ep0's request object only needs to be automatically re-queued when the
Data Stage completes, in order to implement the Status Stage. Once the
Status Stage transaction is complete, there is no need to re-queue the
USB request, so don't do that.

Don't sent USB request completion callbacks for Status Stage transactions.
These were queued by ci_udc itself, and only serve to confuse the USB
function code. For example, f_dfu attempts to interpret the 0-length data
buffers for Status Stage transactions as DFU packets. These buffers
contain stale data from the previous transaction. This causes f_dfu to
complain about a sequence number mismatch.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

1 files changed, 1 insertions, 0 deletions

diff --git a/drivers/usb/gadget/ci_udc.h b/drivers/usb/gadget/ci_udc.h
index 7d76af8..c214402 100644
--- a/drivers/usb/gadget/ci_udc.h
+++ b/drivers/usb/gadget/ci_udc.h
@@ -98,6 +98,7 @@ struct ci_ep {
 struct ci_drv {
 	struct usb_gadget		gadget;
 	struct ci_req			*ep0_req;
+	bool				ep0_data_phase;
 	struct usb_gadget_driver	*driver;
 	struct ehci_ctrl		*ctrl;
 	struct ept_queue_head		*epts;