spi: Zap andes_spi driver

Zap andes_spi driver since the boards used this driver
is no longer been active.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Macpaul Lin <macpaul@andestech.com>

3 files changed, 0 insertions, 400 deletions

diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index e288692..93065b7 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -17,7 +17,6 @@ endif
 
 obj-$(CONFIG_EP93XX_SPI) += ep93xx_spi.o
 obj-$(CONFIG_ALTERA_SPI) += altera_spi.o
-obj-$(CONFIG_ANDES_SPI) += andes_spi.o
 obj-$(CONFIG_ARMADA100_SPI) += armada100_spi.o
 obj-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o
 obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o
diff --git a/drivers/spi/andes_spi.c b/drivers/spi/andes_spi.c
deleted file mode 100644
index 82aed75..0000000
--- a/drivers/spi/andes_spi.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Driver of Andes SPI Controller
- *
- * (C) Copyright 2011 Andes Technology
- * Macpaul Lin <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi.h>
-
-#include <asm/io.h>
-#include "andes_spi.h"
-
-void spi_init(void)
-{
-	/* do nothing */
-}
-
-static void andes_spi_spit_en(struct andes_spi_slave *ds)
-{
-	unsigned int dcr = readl(&ds->regs->dcr);
-
-	debug("%s: dcr: %x, write value: %x\n",
-			__func__, dcr, (dcr | ANDES_SPI_DCR_SPIT));
-
-	writel((dcr | ANDES_SPI_DCR_SPIT), &ds->regs->dcr);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-			unsigned int max_hz, unsigned int mode)
-{
-	struct andes_spi_slave	*ds;
-
-	if (!spi_cs_is_valid(bus, cs))
-		return NULL;
-
-	ds = spi_alloc_slave(struct andes_spi_slave, bus, cs);
-	if (!ds)
-		return NULL;
-
-	ds->regs = (struct andes_spi_regs *)CONFIG_SYS_SPI_BASE;
-
-	/*
-	 * The hardware of andes_spi will set its frequency according
-	 * to APB/AHB bus clock. Hence the hardware doesn't allow changing of
-	 * requency and so the user requested speed is always ignored.
-	 */
-	ds->freq = max_hz;
-
-	return &ds->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-	struct andes_spi_slave *ds = to_andes_spi(slave);
-
-	free(ds);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-	struct andes_spi_slave *ds = to_andes_spi(slave);
-	unsigned int apb;
-	unsigned int baud;
-
-	/* Enable the SPI hardware */
-	writel(ANDES_SPI_CR_SPIRST, &ds->regs->cr);
-	udelay(1000);
-
-	/* setup format */
-	baud = ((CONFIG_SYS_CLK_FREQ / CONFIG_SYS_SPI_CLK / 2) - 1) & 0xFF;
-
-	/*
-	 * SPI_CLK = AHB bus clock / ((BAUD + 1)*2)
-	 * BAUD = AHB bus clock / SPI_CLK / 2) - 1
-	 */
-	apb = (readl(&ds->regs->apb) & 0xffffff00) | baud;
-	writel(apb, &ds->regs->apb);
-
-	/* no interrupts */
-	writel(0, &ds->regs->ie);
-
-	return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-	struct andes_spi_slave *ds = to_andes_spi(slave);
-
-	/* Disable the SPI hardware */
-	writel(ANDES_SPI_CR_SPIRST, &ds->regs->cr);
-}
-
-static int andes_spi_read(struct spi_slave *slave, unsigned int len,
-			    u8 *rxp, unsigned long flags)
-{
-	struct andes_spi_slave *ds = to_andes_spi(slave);
-	unsigned int i, left;
-	unsigned int data;
-
-	debug("%s: slave: %x, len: %d, rxp: %x, flags: %d\n",
-		__func__, slave, len, rxp, flags);
-
-	debug("%s: data: ", __func__);
-	while (len > 0) {
-		left = min(len, 4);
-		data = readl(&ds->regs->data);
-
-		debug(" ");
-		for (i = 0; i < left; i++) {
-			debug("%02x ", data & 0xff);
-			*rxp++ = data;
-			data >>= 8;
-			len--;
-		}
-	}
-	debug("\n");
-
-	return 0;
-}
-
-static int andes_spi_write(struct spi_slave *slave, unsigned int wlen,
-			unsigned int rlen, const u8 *txp, unsigned long flags)
-{
-	struct andes_spi_slave *ds = to_andes_spi(slave);
-	unsigned int data;
-	unsigned int i, left;
-	unsigned int spit_enabled = 0;
-
-	debug("%s: slave: %x, wlen: %d, rlen: %d, txp: %x, flags: %x\n",
-		__func__, slave, wlen, rlen, txp, flags);
-
-	/* The value of wlen and rlen wrote to register must minus 1 */
-	if (rlen == 0)					/* write only */
-		writel(ANDES_SPI_DCR_MODE_WO | ANDES_SPI_DCR_WCNT(wlen-1) |
-				ANDES_SPI_DCR_RCNT(0), &ds->regs->dcr);
-	else						/* write then read */
-		writel(ANDES_SPI_DCR_MODE_WR | ANDES_SPI_DCR_WCNT(wlen-1) |
-				ANDES_SPI_DCR_RCNT(rlen-1), &ds->regs->dcr);
-
-	/* wait till SPIBSY is cleared */
-	while (readl(&ds->regs->st) & ANDES_SPI_ST_SPIBSY)
-		;
-
-	/* data write process */
-	debug("%s: txp: ", __func__);
-	while (wlen > 0) {
-		/* clear the data */
-		data = 0;
-
-		/* data are usually be read 32bits once a time */
-		left = min(wlen, 4);
-
-		for (i = 0; i < left; i++) {
-			debug("%x ", *txp);
-			data |= *txp++ << (i * 8);
-			wlen--;
-		}
-		debug("\n");
-
-		debug("data: %08x\n", data);
-		debug("streg before write: %08x\n", readl(&ds->regs->st));
-		/* wait till TXFULL is deasserted */
-		while (readl(&ds->regs->st) & ANDES_SPI_ST_TXFEL)
-			;
-		writel(data, &ds->regs->data);
-		debug("streg after write: %08x\n", readl(&ds->regs->st));
-
-
-		if (spit_enabled == 0) {
-			/* enable SPIT bit -  trigger the tx and rx progress */
-			andes_spi_spit_en(ds);
-			spit_enabled = 1;
-		}
-
-	}
-	debug("\n");
-
-	return 0;
-}
-
-/*
- * spi_xfer:
- *	Since andes_spi doesn't support independent command transaction,
- *	that is, write and than read must be operated in continuous
- *	execution, there is no need to set dcr and trigger spit again in
- *	RX process.
- */
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
-	     const void *dout, void *din, unsigned long flags)
-{
-	unsigned int len;
-	static int op_nextime;
-	static u8 tmp_cmd[5];
-	static int tmp_wlen;
-	unsigned int i;
-
-	if (bitlen == 0)
-		/* Finish any previously submitted transfers */
-		goto out;
-
-	if (bitlen % 8) {
-		/* Errors always terminate an ongoing transfer */
-		flags |= SPI_XFER_END;
-		goto out;
-	}
-
-	len = bitlen / 8;
-
-	debug("%s: slave: %08x, bitlen: %d, dout: "
-		"%08x, din: %08x, flags: %d, len: %d\n",
-		__func__, slave, bitlen, dout, din, flags, len);
-
-	/*
-	 * Important:
-	 *	andes_spi's hardware doesn't support 2 data channel. The read
-	 *	and write cmd/data share the same register (data register).
-	 *
-	 *	If a command has write and read transaction, you cannot do write
-	 *	this time and then do read on next time.
-	 *
-	 *	A command writes first with a read response must indicating
-	 *	the read length in write operation. Hence the write action must
-	 *	be stored temporary and wait until the next read action has been
-	 *	arrived. Then we flush the write and read action out together.
-	 */
-	if (!dout) {
-		if (op_nextime == 1) {
-			/* flags should be SPI_XFER_END, value is 2 */
-			op_nextime = 0;
-			andes_spi_write(slave, tmp_wlen, len, tmp_cmd, flags);
-		}
-		return andes_spi_read(slave, len, din, flags);
-	} else if (!din) {
-		if (flags == SPI_XFER_BEGIN) {
-			/* store the write command and do operation next time */
-			op_nextime = 1;
-			memset(tmp_cmd, 0, sizeof(tmp_cmd));
-			memcpy(tmp_cmd, dout, len);
-
-			debug("%s: tmp_cmd: ", __func__);
-			for (i = 0; i < len; i++)
-				debug("%x ", *(tmp_cmd + i));
-			debug("\n");
-
-			tmp_wlen = len;
-		} else {
-			/*
-			 * flags should be (SPI_XFER_BEGIN | SPI_XFER_END),
-			 * the value is 3.
-			 */
-			if (op_nextime == 1) {
-				/* flags should be SPI_XFER_END, value is 2 */
-				op_nextime = 0;
-				/* flags 3 implies write only */
-				andes_spi_write(slave, tmp_wlen, 0, tmp_cmd, 3);
-			}
-
-			debug("flags: %x\n", flags);
-			return andes_spi_write(slave, len, 0, dout, flags);
-		}
-	}
-
-out:
-	return 0;
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	/* do nothing */
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	/* do nothing */
-}
diff --git a/drivers/spi/andes_spi.h b/drivers/spi/andes_spi.h
deleted file mode 100644
index b7d2945..0000000
--- a/drivers/spi/andes_spi.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Register definitions for the Andes SPI Controller
- *
- * (C) Copyright 2011 Andes Technology
- * Macpaul Lin <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __ANDES_SPI_H
-#define __ANDES_SPI_H
-
-struct andes_spi_regs {
-	unsigned int	apb;		/* 0x00 - APB SPI interface setting */
-	unsigned int	pio;		/* 0x04 - PIO reg */
-	unsigned int	cr;		/* 0x08 - SPI Control reg */
-	unsigned int	st;		/* 0x0c - SPI Status reg */
-	unsigned int	ie;		/* 0x10 - Interrupt Enable reg */
-	unsigned int	ist;		/* 0x14 - Interrupt Status reg */
-	unsigned int	dcr;		/* 0x18 - data control reg */
-	unsigned int	data;		/* 0x1c - data register */
-	unsigned int	ahb;		/* 0x20 - AHB SPI interface setting */
-	unsigned int	ver;		/* 0x3c - SPI version reg */
-};
-
-#define BIT(x)			(1 << (x))
-
-/* 0x00 - APB SPI interface setting register */
-#define ANDES_SPI_APB_BAUD(x)	(((x) & 0xff) < 0)
-#define ANDES_SPI_APB_CSHT(x)	(((x) & 0xf) < 16)
-#define ANDES_SPI_APB_SPNTS	BIT(20)		/* 0: normal, 1: delay */
-#define ANDES_SPI_APB_CPHA	BIT(24)		/* 0: Sampling at odd edges */
-#define ANDES_SPI_APB_CPOL	BIT(25)		/* 0: SCK low, 1: SCK high */
-#define ANDES_SPI_APB_MSSL	BIT(26)		/* 0: SPI Master, 1: slave */
-
-/* 0x04 - PIO register */
-#define ANDES_SPI_PIO_MISO	BIT(0)		/* input value of pin MISO */
-#define ANDES_SPI_PIO_MOSI	BIT(1)		/* I/O value of pin MOSI */
-#define ANDES_SPI_PIO_SCK	BIT(2)		/* I/O value of pin SCK */
-#define ANDES_SPI_PIO_CS	BIT(3)		/* I/O value of pin CS */
-#define ANDES_SPI_PIO_PIOE	BIT(4)		/* Programming IO Enable */
-
-/* 0x08 - SPI Control register */
-#define ANDES_SPI_CR_SPIRST	BIT(0)		/* SPI mode reset */
-#define ANDES_SPI_CR_RXFRST	BIT(1)		/* RxFIFO reset */
-#define ANDES_SPI_CR_TXFRST	BIT(2)		/* TxFIFO reset */
-#define ANDES_SPI_CR_RXFTH(x)	(((x) & 0x1f) << 10)	/* RxFIFO Threshold */
-#define ANDES_SPI_CR_TXFTH(x)	(((x) & 0x1f) << 18)	/* TxFIFO Threshold */
-
-/* 0x0c - SPI Status register */
-#define ANDES_SPI_ST_SPIBSY	BIT(0)		/* SPI Transfer is active */
-#define ANDES_SPI_ST_RXFEM	BIT(8)		/* RxFIFO Empty Flag */
-#define ANDES_SPI_ST_RXFEL	BIT(9)		/* RxFIFO Full Flag */
-#define ANDES_SPI_ST_RXFVE(x)	(((x) >> 10) & 0x1f)
-#define ANDES_SPI_ST_TXFEM	BIT(16)		/* TxFIFO Empty Flag */
-#define ANDES_SPI_ST_TXFEL	BIT(7)		/* TxFIFO Full Flag */
-#define ANDES_SPI_ST_TXFVE(x)	(((x) >> 18) & 0x1f)
-
-/* 0x10 - Interrupt Enable register */
-#define ANDES_SPI_IE_RXFORIE	BIT(0)		/* RxFIFO overrun intr */
-#define ANDES_SPI_IE_TXFURIE	BIT(1)		/* TxFOFO underrun intr */
-#define ANDES_SPI_IE_RXFTHIE	BIT(2)		/* RxFIFO threshold intr */
-#define ANDES_SPI_IE_TXFTHIE	BIT(3)		/* TxFIFO threshold intr */
-#define ANDES_SPI_IE_SPIEIE	BIT(4)		/* SPI transmit END intr */
-#define ANDES_SPI_IE_SPCFIE	BIT(5)		/* AHB/APB TxReq conflict */
-
-/* 0x14 - Interrupt Status Register */
-#define ANDES_SPI_IST_RXFORI	BIT(0)		/* has RxFIFO overrun */
-#define ANDES_SPI_IST_TXFURI	BIT(1)		/* has TxFOFO underrun */
-#define ANDES_SPI_IST_RXFTHI	BIT(2)		/* has RxFIFO threshold */
-#define ANDES_SPI_IST_TXFTHI	BIT(3)		/* has TxFIFO threshold */
-#define ANDES_SPI_IST_SPIEI	BIT(4)		/* has SPI transmit END */
-#define ANDES_SPI_IST_SPCFI	BIT(5)		/* has AHB/APB TxReq conflict */
-
-/* 0x18 - Data Control Register */
-#define ANDES_SPI_DCR_RCNT(x)		(((x) & 0x3ff) << 0)
-#define ANDES_SPI_DCR_DYCNT(x)		(((x) & 0x7) << 12)
-#define ANDES_SPI_DCR_WCNT(x)		(((x) & 0x3ff) << 16)
-#define ANDES_SPI_DCR_TRAMODE(x)	(((x) & 0x7) << 28)
-#define ANDES_SPI_DCR_SPIT		BIT(31)		/* SPI bus trigger */
-
-#define ANDES_SPI_DCR_MODE_WRCON	ANDES_SPI_DCR_TRAMODE(0)	/* w/r at the same time */
-#define ANDES_SPI_DCR_MODE_WO		ANDES_SPI_DCR_TRAMODE(1)	/* write only		*/
-#define ANDES_SPI_DCR_MODE_RO		ANDES_SPI_DCR_TRAMODE(2)	/* read only		*/
-#define ANDES_SPI_DCR_MODE_WR		ANDES_SPI_DCR_TRAMODE(3)	/* write, read		*/
-#define ANDES_SPI_DCR_MODE_RW		ANDES_SPI_DCR_TRAMODE(4)	/* read, write		*/
-#define ANDES_SPI_DCR_MODE_WDR		ANDES_SPI_DCR_TRAMODE(5)	/* write, dummy, read	*/
-#define ANDES_SPI_DCR_MODE_RDW		ANDES_SPI_DCR_TRAMODE(6)	/* read, dummy, write	*/
-#define ANDES_SPI_DCR_MODE_RECEIVE	ANDES_SPI_DCR_TRAMODE(7)	/* receive		*/
-
-/* 0x20 - AHB SPI interface setting register */
-#define ANDES_SPI_AHB_BAUD(x)	(((x) & 0xff) < 0)
-#define ANDES_SPI_AHB_CSHT(x)	(((x) & 0xf) < 16)
-#define ANDES_SPI_AHB_SPNTS	BIT(20)		/* 0: normal, 1: delay */
-#define ANDES_SPI_AHB_CPHA	BIT(24)		/* 0: Sampling at odd edges */
-#define ANDES_SPI_AHB_CPOL	BIT(25)		/* 0: SCK low, 1: SCK high */
-#define ANDES_SPI_AHB_MSSL	BIT(26)		/* only Master mode */
-
-/* 0x3c - Version Register - (Year V.MAJOR.MINOR) */
-#define ANDES_SPI_VER_MINOR(x)	(((x) >> 0) & 0xf)
-#define ANDES_SPI_VER_MAJOR(x)	(((x) >> 8) & 0xf)
-#define ANDES_SPI_VER_YEAR(x)	(((x) >> 16) & 0xf)
-
-struct andes_spi_slave {
-	struct spi_slave slave;
-	struct andes_spi_regs *regs;
-	unsigned int freq;
-};
-
-static inline struct andes_spi_slave *to_andes_spi(struct spi_slave *slave)
-{
-	return container_of(slave, struct andes_spi_slave, slave);
-}
-
-#endif /* __ANDES_SPI_H */