summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2012-03-30 18:09:08 +0200
committerWolfgang Denk <wd@denx.de>2012-03-30 18:09:08 +0200
commitbc6f6c87b685bcdcd5bef522982d15209b6b9601 (patch)
treee5f924a962f002a1015e157a54450dfa9b953e9e /drivers/spi
parentf2ea62474b4da9fc41735cbc1fe8491b247e0930 (diff)
parent4a0764858b0bdcb3508f01b96e3fa32b16cdb30f (diff)
downloadu-boot-imx-bc6f6c87b685bcdcd5bef522982d15209b6b9601.zip
u-boot-imx-bc6f6c87b685bcdcd5bef522982d15209b6b9601.tar.gz
u-boot-imx-bc6f6c87b685bcdcd5bef522982d15209b6b9601.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: (146 commits) arm: Use common .lds file where possible arm: add a common .lds link script arm: Remove unneeded setting of LDCSRIPT Define CPUDIR for the .lds link script arm: Remove zipitz2 link script Allow arch directory to contain .lds without requiring Makefile OMAP: Remove omap1610inn-based boards arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings board/ti/beagle/beagle.c: Fix build warnings sdrc.c: Fix typo in do_sdrc_init() for SPL tegra: i2c: Add I2C driver tegra: fdt: i2c: Add extra I2C bindings for U-Boot tegra: i2c: Select I2C ordering for Seaboard tegra: i2c: Enable I2C on Seaboard tegra: i2c: Select number of controllers for Tegra2 boards tegra: i2c: Initialise I2C on Nvidia boards tegra: Enhance clock support to handle 16-bit clock divisors fdt: Add function to allow aliases to refer to multiple nodes tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE tegra: fdt: Enable FDT support for Ventana tegra: fdt: Enable FDT support for Seaboard tegra: usb: Enable USB on Seaboard tegra: usb: Add common USB defines for tegra2 boards tegra: usb: Add USB support to nvidia boards arm: Check for valid FDT after console is up fdt: Avoid early panic() when there is no FDT present tegra: usb: Add support for Tegra USB peripheral tegra: fdt: Add function to return peripheral/clock ID usb: Add support for txfifo threshold tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard tegra: usb: fdt: Add additional device tree definitions for USB ports tegra: fdt: Add clock bindings for Tegra2 Seaboard tegra: fdt: Add clock bindings tegra: fdt: Add additional USB binding fdt: Add tegra-usb bindings file from linux fdt: Add staging area for device tree binding documentation tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel tegra: fdt: Add Tegra2x device tree file from kernel arm: fdt: Add skeleton device tree file from kernel fdt: Add basic support for decoding GPIO definitions fdt: Add functions to access phandles, arrays and bools fdt: Tidy up a few fdtdec problems fdt: Add tests for fdtdec fdt: Add fdtdec_find_aliases() to deal with alias nodes arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load net: fec_mxc: allow use with cache enabled net: force PKTALIGN to ARCH_DMA_MINALIGN i.MX28: Enable caches by default i.MX28: Make use of the bounce buffer i.MX28: Do data transfers via DMA in MMC driver MMC: Implement generic bounce buffer i.MX28: Add cache support to MXS NAND driver i.MX28: Add cache support into the APBH DMA driver ARM926EJS: Implement cache operations board/vpac270/onenand.c: Fix build errors nhk8815: fix build errors atmel-boards: add missing atmel_mci.h ARM: highbank: setup env from boot source register ARM: highbank: change env config to use nvram ARM: highbank: add reset support ARM: highbank: Add boot counter support ARM: highbank: change TEXT_BASE to 0x8000 ARM: highbank: fix us_to_tick calculation ARM: highbank: add missing get_tbclk ARM: highbank: fix warning for calxedaxgmac_initialize net: calxedaxgmac: fix build due to missing __aligned definition EXYNOS: Add structure for Exynos4 DMC EXYNOS: SMDK5250: Support all 4 UARTs ARM: fix s3c2410 timer code ARM: davinci: fixes for cam_enc_4xx board omap3_spi: receive transmit mode calimain, enbw_cmc: Fix typo in comments Davinci: ea20: use gpio framework to access gpios OMAP3: mt_ventoux: sets its own mtdparts OMAP3: mt_ventoux: updated timing for FPGA twl4030: fix potential power supply handling issues NAND: TI: fix warnings in omap_gpmc.c cam_enc_4xx: Rename 'images' to 'imgs' arm: Add Prep subcommand support to bootm OMAP3: twister: add support to boot Linux from SPL SPL: call cleanup_before_linux() before booting Linux OMAP3: SPL: do not call I2C init if no I2C is set. Add cache functions to SPL for armv7 devkit8000: Implement and activate direct OS boot omap/spl: change output of spl_parse_image_header omap-common/spl: Add linux boot to SPL devkit8000/spl: init GPMC for dm9000 in SPL omap-common: Add NAND SPL linux booting devkit8000: add config for spl command Add cmd_spl command mx53ard: Initialize return code with error mx53: Make PLL2 to be the parent of UART clock configs: imx: Use CONFIG_SF_DEFAULT_CS mx28evk: Provide default values for SPI bus and chip select USB: ehci-mx6: Add proper IO accessors mx6: Read silicon revision from register i.MX28: Drop __naked function from spl_mem_init mxs_spi: Return proper timeout error i.MX28: Make the stabilization delays shorter pmic_i2c: Return error in case of invalid pmic_i2c_tx_num mx6: Remove duplicate definition of ANATOP_BASE_ADDR mx6: Fix reset cause for Power On Reset case i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG i.MX28: Enable additional DRAM address bits mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment mx31: add "ARM11P power gating" to get_reset_cause mx31pdk: Fix CONFIG_SYS_MEMTEST_END efikamx: Fix CONFIG_SYS_MEMTEST_END mx53smd: Fix CONFIG_SYS_MEMTEST_END mx53evk: Fix CONFIG_SYS_MEMTEST_END mx51evk: Fix CONFIG_SYS_MEMTEST_END i.MX6: mx6qsabrelite: add ext2 support imximage: Remove overwriting of flash_offset IXP: Fix GPIO_INT_ACT_LOW_SET() IXP: Fix NAND build warning on PDNB3 and SCPU IXP: Move PDNB3 and SCPU from Makefile to boards.cfg IXP: Squash warnings in IXP NPE IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST} IXP: Make IXP buildable with arm-linux- toolchains Examples: Properly append LDFLAGS to LD command SPL: Enable YMODEM support on BeagleBone and AM335x EVM SPL: Add YMODEM over UART load support SPL: Add README.omap3 README: document more SPL config options spl.c: Use __noreturn decorator config.mk: Check for -fstack-usage support config.mk: Make cc-option create a file under include/generated ...
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/mxs_spi.c6
-rw-r--r--drivers/spi/omap3_spi.c66
-rw-r--r--drivers/spi/omap3_spi.h2
3 files changed, 68 insertions, 6 deletions
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
index adb9ca8..4e6f14e 100644
--- a/drivers/spi/mxs_spi.c
+++ b/drivers/spi/mxs_spi.c
@@ -162,7 +162,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for start\n");
- return -1;
+ return -ETIMEDOUT;
}
if (tx)
@@ -174,7 +174,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for data\n");
- return -1;
+ return -ETIMEDOUT;
}
*rx = readl(&ssp_regs->hw_ssp_data);
@@ -184,7 +184,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for finish\n");
- return -1;
+ return -ETIMEDOUT;
}
}
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index af12c0e..9346c0b 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -297,6 +297,65 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
return 0;
}
+/*McSPI Transmit Receive Mode*/
+int omap3_spi_txrx(struct spi_slave *slave,
+ unsigned int len, const u8 *txp, u8 *rxp, unsigned long flags)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+ int timeout = SPI_WAIT_TIMEOUT;
+ int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+ int irqstatus = readl(&ds->regs->irqstatus);
+ int i=0;
+
+ /*Enable SPI channel*/
+ if (flags & SPI_XFER_BEGIN)
+ writel(OMAP3_MCSPI_CHCTRL_EN,
+ &ds->regs->channel[ds->slave.cs].chctrl);
+
+ /*set TRANSMIT-RECEIVE Mode*/
+ chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+ chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ /*Shift in and out 1 byte at time*/
+ for (i=0; i < len; i++){
+ /* Write: wait for TX empty (TXS == 1)*/
+ irqstatus |= (1<< (4*(ds->slave.bus)));
+ while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ OMAP3_MCSPI_CHSTAT_TXS)) {
+ if (--timeout <= 0) {
+ printf("SPI TXS timed out, status=0x%08x\n",
+ readl(&ds->regs->channel[ds->slave.cs].chstat));
+ return -1;
+ }
+ }
+ /* Write the data */
+ writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
+
+ /*Read: wait for RX containing data (RXS == 1)*/
+ while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ OMAP3_MCSPI_CHSTAT_RXS)) {
+ if (--timeout <= 0) {
+ printf("SPI RXS timed out, status=0x%08x\n",
+ readl(&ds->regs->channel[ds->slave.cs].chstat));
+ return -1;
+ }
+ }
+ /* Read the data */
+ rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
+ }
+
+ /*if transfer must be terminated disable the channel*/
+ if (flags & SPI_XFER_END) {
+ chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+ }
+
+ return 0;
+}
+
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
@@ -329,10 +388,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
}
ret = 0;
} else {
- if (dout != NULL)
+ if (dout != NULL && din != NULL)
+ ret = omap3_spi_txrx(slave, len, txp, rxp, flags);
+ else if (dout != NULL)
ret = omap3_spi_write(slave, len, txp, flags);
-
- if (din != NULL)
+ else if (din != NULL)
ret = omap3_spi_read(slave, len, rxp, flags);
}
return ret;
diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h
index b8e3a4c..0ac801c 100644
--- a/drivers/spi/omap3_spi.h
+++ b/drivers/spi/omap3_spi.h
@@ -109,6 +109,8 @@ static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave)
return container_of(slave, struct omap3_spi_slave, slave);
}
+int omap3_spi_txrx(struct spi_slave *slave, unsigned int len, const u8 *txp,
+ u8 *rxp, unsigned long flags);
int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
unsigned long flags);
int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,