Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (146 commits)
  arm: Use common .lds file where possible
  arm: add a common .lds link script
  arm: Remove unneeded setting of LDCSRIPT
  Define CPUDIR for the .lds link script
  arm: Remove zipitz2 link script
  Allow arch directory to contain .lds without requiring Makefile
  OMAP: Remove omap1610inn-based boards
  arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings
  board/ti/beagle/beagle.c: Fix build warnings
  sdrc.c: Fix typo in do_sdrc_init() for SPL
  tegra: i2c: Add I2C driver
  tegra: fdt: i2c: Add extra I2C bindings for U-Boot
  tegra: i2c: Select I2C ordering for Seaboard
  tegra: i2c: Enable I2C on Seaboard
  tegra: i2c: Select number of controllers for Tegra2 boards
  tegra: i2c: Initialise I2C on Nvidia boards
  tegra: Enhance clock support to handle 16-bit clock divisors
  fdt: Add function to allow aliases to refer to multiple nodes
  tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
  tegra: fdt: Enable FDT support for Ventana
  tegra: fdt: Enable FDT support for Seaboard
  tegra: usb: Enable USB on Seaboard
  tegra: usb: Add common USB defines for tegra2 boards
  tegra: usb: Add USB support to nvidia boards
  arm: Check for valid FDT after console is up
  fdt: Avoid early panic() when there is no FDT present
  tegra: usb: Add support for Tegra USB peripheral
  tegra: fdt: Add function to return peripheral/clock ID
  usb: Add support for txfifo threshold
  tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
  tegra: usb: fdt: Add additional device tree definitions for USB ports
  tegra: fdt: Add clock bindings for Tegra2 Seaboard
  tegra: fdt: Add clock bindings
  tegra: fdt: Add additional USB binding
  fdt: Add tegra-usb bindings file from linux
  fdt: Add staging area for device tree binding documentation
  tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
  tegra: fdt: Add Tegra2x device tree file from kernel
  arm: fdt: Add skeleton device tree file from kernel
  fdt: Add basic support for decoding GPIO definitions
  fdt: Add functions to access phandles, arrays and bools
  fdt: Tidy up a few fdtdec problems
  fdt: Add tests for fdtdec
  fdt: Add fdtdec_find_aliases() to deal with alias nodes
  arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
  net: fec_mxc: allow use with cache enabled
  net: force PKTALIGN to ARCH_DMA_MINALIGN
  i.MX28: Enable caches by default
  i.MX28: Make use of the bounce buffer
  i.MX28: Do data transfers via DMA in MMC driver
  MMC: Implement generic bounce buffer
  i.MX28: Add cache support to MXS NAND driver
  i.MX28: Add cache support into the APBH DMA driver
  ARM926EJS: Implement cache operations
  board/vpac270/onenand.c: Fix build errors
  nhk8815: fix build errors
  atmel-boards: add missing atmel_mci.h
  ARM: highbank: setup env from boot source register
  ARM: highbank: change env config to use nvram
  ARM: highbank: add reset support
  ARM: highbank: Add boot counter support
  ARM: highbank: change TEXT_BASE to 0x8000
  ARM: highbank: fix us_to_tick calculation
  ARM: highbank: add missing get_tbclk
  ARM: highbank: fix warning for calxedaxgmac_initialize
  net: calxedaxgmac: fix build due to missing __aligned definition
  EXYNOS: Add structure for Exynos4 DMC
  EXYNOS: SMDK5250: Support all 4 UARTs
  ARM: fix s3c2410 timer code
  ARM: davinci: fixes for cam_enc_4xx board
  omap3_spi: receive transmit mode
  calimain, enbw_cmc: Fix typo in comments
  Davinci: ea20: use gpio framework to access gpios
  OMAP3: mt_ventoux: sets its own mtdparts
  OMAP3: mt_ventoux: updated timing for FPGA
  twl4030: fix potential power supply handling issues
  NAND: TI: fix warnings in omap_gpmc.c
  cam_enc_4xx: Rename 'images' to 'imgs'
  arm: Add Prep subcommand support to bootm
  OMAP3: twister: add support to boot Linux from SPL
  SPL: call cleanup_before_linux() before booting Linux
  OMAP3: SPL: do not call I2C init if no I2C is set.
  Add cache functions to SPL for armv7
  devkit8000: Implement and activate direct OS boot
  omap/spl: change output of spl_parse_image_header
  omap-common/spl: Add linux boot to SPL
  devkit8000/spl: init GPMC for dm9000 in SPL
  omap-common: Add NAND SPL linux booting
  devkit8000: add config for spl command
  Add cmd_spl command
  mx53ard: Initialize return code with error
  mx53: Make PLL2 to be the parent of UART clock
  configs: imx: Use CONFIG_SF_DEFAULT_CS
  mx28evk: Provide default values for SPI bus and chip select
  USB: ehci-mx6: Add proper IO accessors
  mx6: Read silicon revision from register
  i.MX28: Drop __naked function from spl_mem_init
  mxs_spi: Return proper timeout error
  i.MX28: Make the stabilization delays shorter
  pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
  mx6: Remove duplicate definition of ANATOP_BASE_ADDR
  mx6: Fix reset cause for Power On Reset case
  i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
  i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
  i.MX28: Enable additional DRAM address bits
  mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment
  mx31: add "ARM11P power gating" to get_reset_cause
  mx31pdk: Fix CONFIG_SYS_MEMTEST_END
  efikamx: Fix CONFIG_SYS_MEMTEST_END
  mx53smd: Fix CONFIG_SYS_MEMTEST_END
  mx53evk: Fix CONFIG_SYS_MEMTEST_END
  mx51evk: Fix CONFIG_SYS_MEMTEST_END
  i.MX6: mx6qsabrelite: add ext2 support
  imximage: Remove overwriting of flash_offset
  IXP: Fix GPIO_INT_ACT_LOW_SET()
  IXP: Fix NAND build warning on PDNB3 and SCPU
  IXP: Move PDNB3 and SCPU from Makefile to boards.cfg
  IXP: Squash warnings in IXP NPE
  IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
  IXP: Make IXP buildable with arm-linux- toolchains
  Examples: Properly append LDFLAGS to LD command
  SPL: Enable YMODEM support on BeagleBone and AM335x EVM
  SPL: Add YMODEM over UART load support
  SPL: Add README.omap3
  README: document more SPL config options
  spl.c: Use __noreturn decorator
  config.mk: Check for -fstack-usage support
  config.mk: Make cc-option create a file under include/generated
  ...

1 files changed, 63 insertions, 3 deletions

diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index af12c0e..9346c0b 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -297,6 +297,65 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
 	return 0;
 }
 
+/*McSPI Transmit Receive Mode*/
+int omap3_spi_txrx(struct spi_slave *slave,
+		unsigned int len, const u8 *txp, u8 *rxp, unsigned long flags)
+{
+	struct omap3_spi_slave *ds = to_omap3_spi(slave);
+	int timeout = SPI_WAIT_TIMEOUT;
+	int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+	int irqstatus = readl(&ds->regs->irqstatus);
+	int i=0;
+
+	/*Enable SPI channel*/
+	if (flags & SPI_XFER_BEGIN)
+		writel(OMAP3_MCSPI_CHCTRL_EN,
+		       &ds->regs->channel[ds->slave.cs].chctrl);
+
+	/*set TRANSMIT-RECEIVE Mode*/
+	chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+	chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+	writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+	/*Shift in and out 1 byte at time*/
+	for (i=0; i < len; i++){
+		/* Write: wait for TX empty (TXS == 1)*/
+		irqstatus |= (1<< (4*(ds->slave.bus)));
+		while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+			 OMAP3_MCSPI_CHSTAT_TXS)) {
+			if (--timeout <= 0) {
+				printf("SPI TXS timed out, status=0x%08x\n",
+				       readl(&ds->regs->channel[ds->slave.cs].chstat));
+				return -1;
+			}
+		}
+		/* Write the data */
+		writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
+
+		/*Read: wait for RX containing data (RXS == 1)*/
+		while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+			 OMAP3_MCSPI_CHSTAT_RXS)) {
+			if (--timeout <= 0) {
+				printf("SPI RXS timed out, status=0x%08x\n",
+				       readl(&ds->regs->channel[ds->slave.cs].chstat));
+				return -1;
+			}
+		}
+		/* Read the data */
+		rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
+	}
+
+	/*if transfer must be terminated disable the channel*/
+	if (flags & SPI_XFER_END) {
+		chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+		writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+		writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+	}
+
+	return 0;
+}
+
 int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 	     const void *dout, void *din, unsigned long flags)
 {
@@ -329,10 +388,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 		}
 		ret = 0;
 	} else {
-		if (dout != NULL)
+		if (dout != NULL && din != NULL)
+			ret = omap3_spi_txrx(slave, len, txp, rxp, flags);
+		else if (dout != NULL)
 			ret = omap3_spi_write(slave, len, txp, flags);
-
-		if (din != NULL)
+		else if (din != NULL)
 			ret = omap3_spi_read(slave, len, rxp, flags);
 	}
 	return ret;