diff options
| author | Stefano Babic <sbabic@denx.de> | 2010-08-23 20:41:19 +0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2010-09-30 14:42:13 +0200 |
| commit | 9f481e95baaca2a5a739f930c16b1cc485b0c1f3 (patch) | |
| tree | f569b9da23b356a660168a2f2dbcc2708eff6fa0 /drivers/spi/mxc_spi.c | |
| parent | 4d0e49d33639394d25a60a4e2d73e99634348af7 (diff) | |
| download | u-boot-imx-9f481e95baaca2a5a739f930c16b1cc485b0c1f3.zip u-boot-imx-9f481e95baaca2a5a739f930c16b1cc485b0c1f3.tar.gz u-boot-imx-9f481e95baaca2a5a739f930c16b1cc485b0c1f3.tar.bz2 | |
MXC: Correct SPI_CPOL setting in SPI driver
The handling of the SPI_CPOL bit inside the SPI
driver was wrong. As reported by the manual,
the meaning of the SSPOL inside the
configuration register is the same as reported
by SPI specification (0 if low in idle, 1 is high
on idle). The driver inverts this logic.
Because this patch sets the logic as specified, it is required
to clear the CPOL bit in the configuration file to adapt
to the correct logic.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: David Jander <david.jander@protonic.nl>
Diffstat (limited to 'drivers/spi/mxc_spi.c')
| -rw-r--r-- | drivers/spi/mxc_spi.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 802cd2e..c6c8f60 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -215,7 +215,7 @@ static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs, if (mode & SPI_CS_HIGH) ss_pol = 1; - if (!(mode & SPI_CPOL)) + if (mode & SPI_CPOL) sclkpol = 1; if (mode & SPI_CPHA) @@ -412,7 +412,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (mode & SPI_CPHA) ctrl_reg |= MXC_CSPICTRL_PHA; - if (!(mode & SPI_CPOL)) + if (mode & SPI_CPOL) ctrl_reg |= MXC_CSPICTRL_POL; if (mode & SPI_CS_HIGH) ctrl_reg |= MXC_CSPICTRL_SSPOL; |