summaryrefslogtreecommitdiff
path: root/drivers/spi/exynos_spi.c
diff options
context:
space:
mode:
authorRajeshwari Shinde <rajeshwari.s@samsung.com>2012-11-02 01:15:36 +0000
committerMinkyu Kang <mk7.kang@samsung.com>2012-11-15 21:08:21 +0900
commit1bf43b829eae86e70895fb90f0b3a102dfc7ba2c (patch)
tree1e43092620b259bd3761f577fa5e5bc12a88da96 /drivers/spi/exynos_spi.c
parent383b5cc58ce637ff27112c0b82abf5ff664fec65 (diff)
downloadu-boot-imx-1bf43b829eae86e70895fb90f0b3a102dfc7ba2c.zip
u-boot-imx-1bf43b829eae86e70895fb90f0b3a102dfc7ba2c.tar.gz
u-boot-imx-1bf43b829eae86e70895fb90f0b3a102dfc7ba2c.tar.bz2
SPI: Add SPI Driver for EXYNOS.
This patch adds SPI driver for EXYNOS. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: jy0922.shim@samsung.com Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Diffstat (limited to 'drivers/spi/exynos_spi.c')
-rw-r--r--drivers/spi/exynos_spi.c367
1 files changed, 367 insertions, 0 deletions
diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c
new file mode 100644
index 0000000..3e6c18f
--- /dev/null
+++ b/drivers/spi/exynos_spi.c
@@ -0,0 +1,367 @@
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Padmavathi Venna <padma.v@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-exynos/spi.h>
+#include <asm/io.h>
+
+/* Information about each SPI controller */
+struct spi_bus {
+ enum periph_id periph_id;
+ s32 frequency; /* Default clock frequency, -1 for none */
+ struct exynos_spi *regs;
+ int inited; /* 1 if this bus is ready for use */
+};
+
+/* A list of spi buses that we know about */
+static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS];
+
+struct exynos_spi_slave {
+ struct spi_slave slave;
+ struct exynos_spi *regs;
+ unsigned int freq; /* Default frequency */
+ unsigned int mode;
+ enum periph_id periph_id; /* Peripheral ID for this device */
+ unsigned int fifo_size;
+};
+
+static struct spi_bus *spi_get_bus(unsigned dev_index)
+{
+ if (dev_index < EXYNOS5_SPI_NUM_CONTROLLERS)
+ return &spi_bus[dev_index];
+ debug("%s: invalid bus %d", __func__, dev_index);
+
+ return NULL;
+}
+
+static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct exynos_spi_slave, slave);
+}
+
+/**
+ * Setup the driver private data
+ *
+ * @param bus ID of the bus that the slave is attached to
+ * @param cs ID of the chip select connected to the slave
+ * @param max_hz Required spi frequency
+ * @param mode Required spi mode (clk polarity, clk phase and
+ * master or slave)
+ * @return new device or NULL
+ */
+struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct exynos_spi_slave *spi_slave;
+ struct spi_bus *bus;
+
+ if (!spi_cs_is_valid(busnum, cs)) {
+ debug("%s: Invalid bus/chip select %d, %d\n", __func__,
+ busnum, cs);
+ return NULL;
+ }
+
+ spi_slave = malloc(sizeof(*spi_slave));
+ if (!spi_slave) {
+ debug("%s: Could not allocate spi_slave\n", __func__);
+ return NULL;
+ }
+
+ bus = &spi_bus[busnum];
+ spi_slave->slave.bus = busnum;
+ spi_slave->slave.cs = cs;
+ spi_slave->regs = bus->regs;
+ spi_slave->mode = mode;
+ spi_slave->periph_id = bus->periph_id;
+ if (bus->periph_id == PERIPH_ID_SPI1 ||
+ bus->periph_id == PERIPH_ID_SPI2)
+ spi_slave->fifo_size = 64;
+ else
+ spi_slave->fifo_size = 256;
+
+ spi_slave->freq = bus->frequency;
+ if (max_hz)
+ spi_slave->freq = min(max_hz, spi_slave->freq);
+
+ return &spi_slave->slave;
+}
+
+/**
+ * Free spi controller
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ */
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+
+ free(spi_slave);
+}
+
+/**
+ * Flush spi tx, rx fifos and reset the SPI controller
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ */
+static void spi_flush_fifo(struct spi_slave *slave)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+ struct exynos_spi *regs = spi_slave->regs;
+
+ clrsetbits_le32(&regs->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST);
+ clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+ setbits_le32(&regs->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON);
+}
+
+/**
+ * Initialize the spi base registers, set the required clock frequency and
+ * initialize the gpios
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ * @return zero on success else a negative value
+ */
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+ struct exynos_spi *regs = spi_slave->regs;
+ u32 reg = 0;
+ int ret;
+
+ ret = set_spi_clk(spi_slave->periph_id,
+ spi_slave->freq);
+ if (ret < 0) {
+ debug("%s: Failed to setup spi clock\n", __func__);
+ return ret;
+ }
+
+ exynos_pinmux_config(spi_slave->periph_id, PINMUX_FLAG_NONE);
+
+ spi_flush_fifo(slave);
+
+ reg = readl(&regs->ch_cfg);
+ reg &= ~(SPI_CH_CPHA_B | SPI_CH_CPOL_L);
+
+ if (spi_slave->mode & SPI_CPHA)
+ reg |= SPI_CH_CPHA_B;
+
+ if (spi_slave->mode & SPI_CPOL)
+ reg |= SPI_CH_CPOL_L;
+
+ writel(reg, &regs->ch_cfg);
+ writel(SPI_FB_DELAY_180, &regs->fb_clk);
+
+ return 0;
+}
+
+/**
+ * Reset the spi H/W and flush the tx and rx fifos
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ */
+void spi_release_bus(struct spi_slave *slave)
+{
+ spi_flush_fifo(slave);
+}
+
+static void spi_get_fifo_levels(struct exynos_spi *regs,
+ int *rx_lvl, int *tx_lvl)
+{
+ uint32_t spi_sts = readl(&regs->spi_sts);
+
+ *rx_lvl = (spi_sts >> SPI_RX_LVL_OFFSET) & SPI_FIFO_LVL_MASK;
+ *tx_lvl = (spi_sts >> SPI_TX_LVL_OFFSET) & SPI_FIFO_LVL_MASK;
+}
+
+/**
+ * If there's something to transfer, do a software reset and set a
+ * transaction size.
+ *
+ * @param regs SPI peripheral registers
+ * @param count Number of bytes to transfer
+ */
+static void spi_request_bytes(struct exynos_spi *regs, int count)
+{
+ assert(count && count < (1 << 16));
+ setbits_le32(&regs->ch_cfg, SPI_CH_RST);
+ clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+ writel(count | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+}
+
+static void spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo,
+ void **dinp, void const **doutp)
+{
+ struct exynos_spi *regs = spi_slave->regs;
+ uchar *rxp = *dinp;
+ const uchar *txp = *doutp;
+ int rx_lvl, tx_lvl;
+ uint out_bytes, in_bytes;
+
+ out_bytes = in_bytes = todo;
+
+ /*
+ * If there's something to send, do a software reset and set a
+ * transaction size.
+ */
+ spi_request_bytes(regs, todo);
+
+ /*
+ * Bytes are transmitted/received in pairs. Wait to receive all the
+ * data because then transmission will be done as well.
+ */
+ while (in_bytes) {
+ int temp;
+
+ /* Keep the fifos full/empty. */
+ spi_get_fifo_levels(regs, &rx_lvl, &tx_lvl);
+ if (tx_lvl < spi_slave->fifo_size && out_bytes) {
+ temp = txp ? *txp++ : 0xff;
+ writel(temp, &regs->tx_data);
+ out_bytes--;
+ }
+ if (rx_lvl > 0 && in_bytes) {
+ temp = readl(&regs->rx_data);
+ if (rxp)
+ *rxp++ = temp;
+ in_bytes--;
+ }
+ }
+ *dinp = rxp;
+ *doutp = txp;
+}
+
+/**
+ * Transfer and receive data
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ * @param bitlen No of bits to tranfer or receive
+ * @param dout Pointer to transfer buffer
+ * @param din Pointer to receive buffer
+ * @param flags Flags for transfer begin and end
+ * @return zero on success else a negative value
+ */
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+ int upto, todo;
+ int bytelen;
+
+ /* spi core configured to do 8 bit transfers */
+ if (bitlen % 8) {
+ debug("Non byte aligned SPI transfer.\n");
+ return -1;
+ }
+
+ /* Start the transaction, if necessary. */
+ if ((flags & SPI_XFER_BEGIN))
+ spi_cs_activate(slave);
+
+ /* Exynos SPI limits each transfer to 65535 bytes */
+ bytelen = bitlen / 8;
+ for (upto = 0; upto < bytelen; upto += todo) {
+ todo = min(bytelen - upto, (1 << 16) - 1);
+ spi_rx_tx(spi_slave, todo, &din, &dout);
+ }
+
+ /* Stop the transaction, if necessary. */
+ if ((flags & SPI_XFER_END))
+ spi_cs_deactivate(slave);
+
+ return 0;
+}
+
+/**
+ * Validates the bus and chip select numbers
+ *
+ * @param bus ID of the bus that the slave is attached to
+ * @param cs ID of the chip select connected to the slave
+ * @return one on success else zero
+ */
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return spi_get_bus(bus) && cs == 0;
+}
+
+/**
+ * Activate the CS by driving it LOW
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ */
+void spi_cs_activate(struct spi_slave *slave)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+
+ clrbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT);
+ debug("Activate CS, bus %d\n", spi_slave->slave.bus);
+}
+
+/**
+ * Deactivate the CS by driving it HIGH
+ *
+ * @param slave Pointer to spi_slave to which controller has to
+ * communicate with
+ */
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+
+ setbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT);
+ debug("Deactivate CS, bus %d\n", spi_slave->slave.bus);
+}
+
+static inline struct exynos_spi *get_spi_base(int dev_index)
+{
+ if (dev_index < 3)
+ return (struct exynos_spi *)samsung_get_base_spi() + dev_index;
+ else
+ return (struct exynos_spi *)samsung_get_base_spi_isp() +
+ (dev_index - 3);
+}
+
+/* Sadly there is no error return from this function */
+void spi_init(void)
+{
+ int i;
+ struct spi_bus *bus;
+
+ for (i = 0; i < EXYNOS5_SPI_NUM_CONTROLLERS; i++) {
+ bus = &spi_bus[i];
+ bus->regs = get_spi_base(i);
+ bus->periph_id = PERIPH_ID_SPI0 + i;
+
+ /* Although Exynos5 supports upto 50Mhz speed,
+ * we are setting it to 10Mhz for safe side
+ */
+ bus->frequency = 10000000;
+ bus->inited = 1;
+ }
+}