spi: Add Cadence QSPI DM driver used by SoCFPGA

This driver is cloned from the Altera Rockerboard.org U-Boot
repository. I used this git tag: ACDS14.0.1_REL_GSRD_RC2. With Some
modification to support the U-Boot driver model (DM).

As mentioned above, in this new version I ported this driver to the
new driver model (DM). One big advantage of this move is that now
multiple SPI drivers can be enabled on one platform. And since the
SoCFPGA also has the Designware SPI master controller integrated,
this feature is really needed to support both controllers.

Because of this, this series needs the DT support for SoCFPGA
to be applied. For DT based probing in the SPI DM.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Vince Bridgers <vbridger@altera.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>

1 files changed, 76 insertions, 0 deletions

diff --git a/drivers/spi/cadence_qspi.h b/drivers/spi/cadence_qspi.h
new file mode 100644
index 0000000..c9a6142
--- /dev/null
+++ b/drivers/spi/cadence_qspi.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012
+ * Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CADENCE_QSPI_H__
+#define __CADENCE_QSPI_H__
+
+#define CQSPI_IS_ADDR(cmd_len)		(cmd_len > 1 ? 1 : 0)
+
+#define CQSPI_NO_DECODER_MAX_CS		4
+#define CQSPI_DECODER_MAX_CS		16
+#define CQSPI_READ_CAPTURE_MAX_DELAY	16
+
+struct cadence_spi_platdata {
+	unsigned int	max_hz;
+	void		*regbase;
+	void		*ahbbase;
+
+	u32		page_size;
+	u32		block_size;
+	u32		tshsl_ns;
+	u32		tsd2d_ns;
+	u32		tchsh_ns;
+	u32		tslch_ns;
+};
+
+struct cadence_spi_priv {
+	void		*regbase;
+	void		*ahbbase;
+	size_t		cmd_len;
+	u8		cmd_buf[32];
+	size_t		data_len;
+
+	int		qspi_is_init;
+	unsigned int	qspi_calibrated_hz;
+	unsigned int	qspi_calibrated_cs;
+};
+
+/* Functions call declaration */
+void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat);
+void cadence_qspi_apb_controller_enable(void *reg_base_addr);
+void cadence_qspi_apb_controller_disable(void *reg_base_addr);
+
+int cadence_qspi_apb_command_read(void *reg_base_addr,
+	unsigned int cmdlen, const u8 *cmdbuf, unsigned int rxlen, u8 *rxbuf);
+int cadence_qspi_apb_command_write(void *reg_base_addr,
+	unsigned int cmdlen, const u8 *cmdbuf,
+	unsigned int txlen,  const u8 *txbuf);
+
+int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
+	unsigned int cmdlen, const u8 *cmdbuf);
+int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
+	unsigned int rxlen, u8 *rxbuf);
+int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
+	unsigned int cmdlen, const u8 *cmdbuf);
+int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
+	unsigned int txlen, const u8 *txbuf);
+
+void cadence_qspi_apb_chipselect(void *reg_base,
+	unsigned int chip_select, unsigned int decoder_enable);
+void cadence_qspi_apb_set_clk_mode(void *reg_base_addr,
+	unsigned int clk_pol, unsigned int clk_pha);
+void cadence_qspi_apb_config_baudrate_div(void *reg_base,
+	unsigned int ref_clk_hz, unsigned int sclk_hz);
+void cadence_qspi_apb_delay(void *reg_base,
+	unsigned int ref_clk, unsigned int sclk_hz,
+	unsigned int tshsl_ns, unsigned int tsd2d_ns,
+	unsigned int tchsh_ns, unsigned int tslch_ns);
+void cadence_qspi_apb_enter_xip(void *reg_base, char xip_dummy);
+void cadence_qspi_apb_readdata_capture(void *reg_base,
+	unsigned int bypass, unsigned int delay);
+
+#endif /* __CADENCE_QSPI_H__ */