sound: Move Samsung-specific code into its own file

The i2s code is in fact Samsung-specific, but there might be other
implementation. Move this code into its own file. This makes it slightly
more obviously how to adjust the code to support another SoC, when someone
takes this task on.

Also drop non-FDT support, since it isn't used on Exynos 5.

Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 1 insertions, 220 deletions

diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c
index 9b8ce5a..9dda2db 100644
--- a/drivers/sound/sound.c
+++ b/drivers/sound/sound.c
@@ -5,193 +5,10 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#include <malloc.h>
 #include <common.h>
-#include <asm/io.h>
-#include <libfdt.h>
-#include <fdtdec.h>
-#include <i2c.h>
-#include <i2s.h>
 #include <sound.h>
-#include <asm/arch/sound.h>
-#include "wm8994.h"
-#include "max98095.h"
 
-/* defines */
-#define SOUND_400_HZ 400
-#define SOUND_BITS_IN_BYTE 8
-
-static struct i2stx_info g_i2stx_pri;
-
-/*
- * get_sound_i2s_values gets values for i2s parameters
- *
- * @param i2stx_info	i2s transmitter transfer param structure
- * @param blob		FDT blob if enabled else NULL
- */
-static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob)
-{
-#ifdef CONFIG_OF_CONTROL
-	int node;
-	int error = 0;
-	int base;
-
-	node = fdt_path_offset(blob, "i2s");
-	if (node <= 0) {
-		debug("EXYNOS_SOUND: No node for sound in device tree\n");
-		return -1;
-	}
-
-	/*
-	 * Get the pre-defined sound specific values from FDT.
-	 * All of these are expected to be correct otherwise
-	 * wrong register values in i2s setup parameters
-	 * may result in no sound play.
-	 */
-	base = fdtdec_get_addr(blob, node, "reg");
-	if (base == FDT_ADDR_T_NONE) {
-		debug("%s: Missing  i2s base\n", __func__);
-		return -1;
-	}
-	i2s->base_address = base;
-
-	i2s->audio_pll_clk = fdtdec_get_int(blob,
-				node, "samsung,i2s-epll-clock-frequency", -1);
-	error |= i2s->audio_pll_clk;
-	debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
-	i2s->samplingrate = fdtdec_get_int(blob,
-				node, "samsung,i2s-sampling-rate", -1);
-	error |= i2s->samplingrate;
-	debug("samplingrate = %d\n", i2s->samplingrate);
-	i2s->bitspersample = fdtdec_get_int(blob,
-				node, "samsung,i2s-bits-per-sample", -1);
-	error |= i2s->bitspersample;
-	debug("bitspersample = %d\n", i2s->bitspersample);
-	i2s->channels = fdtdec_get_int(blob,
-			node, "samsung,i2s-channels", -1);
-	error |= i2s->channels;
-	debug("channels = %d\n", i2s->channels);
-	i2s->rfs = fdtdec_get_int(blob,
-				node, "samsung,i2s-lr-clk-framesize", -1);
-	error |= i2s->rfs;
-	debug("rfs = %d\n", i2s->rfs);
-	i2s->bfs = fdtdec_get_int(blob,
-				node, "samsung,i2s-bit-clk-framesize", -1);
-	error |= i2s->bfs;
-	debug("bfs = %d\n", i2s->bfs);
-
-	i2s->id = fdtdec_get_int(blob, node, "samsung,i2s-id", -1);
-	error |= i2s->id;
-	debug("id = %d\n", i2s->id);
-
-	if (error == -1) {
-		debug("fail to get sound i2s node properties\n");
-		return -1;
-	}
-#else
-	i2s->base_address = samsung_get_base_i2s();
-	i2s->audio_pll_clk = I2S_PLL_CLK;
-	i2s->samplingrate = I2S_SAMPLING_RATE;
-	i2s->bitspersample = I2S_BITS_PER_SAMPLE;
-	i2s->channels = I2S_CHANNELS;
-	i2s->rfs = I2S_RFS;
-	i2s->bfs = I2S_BFS;
-	i2s->id = 0;
-#endif
-	return 0;
-}
-
-/*
- * Init codec
- *
- * @param blob          FDT blob
- * @param pi2s_tx	i2s parameters required by codec
- * @return              int value, 0 for success
- */
-static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
-{
-	int ret;
-	const char *codectype;
-#ifdef CONFIG_OF_CONTROL
-	int node;
-
-	/* Get the node from FDT for sound */
-	node = fdt_path_offset(blob, "i2s");
-	if (node <= 0) {
-		debug("EXYNOS_SOUND: No node for sound in device tree\n");
-		debug("node = %d\n", node);
-		return -1;
-	}
-
-	/*
-	 * Get the pre-defined sound codec specific values from FDT.
-	 * All of these are expected to be correct otherwise sound
-	 * can not be played
-	 */
-	codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
-	debug("device = %s\n", codectype);
-#else
-	codectype =  AUDIO_CODEC;
-#endif
-	if (!strcmp(codectype, "wm8994")) {
-		/* Check the codec type and initialise the same */
-		ret = wm8994_init(blob, pi2s_tx->id + 1,
-				  pi2s_tx->samplingrate,
-				  (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
-				  pi2s_tx->bitspersample, pi2s_tx->channels);
-	} else if (!strcmp(codectype, "max98095")) {
-		ret = max98095_init(blob, pi2s_tx->id + 1,
-				    pi2s_tx->samplingrate,
-				    (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
-				    pi2s_tx->bitspersample);
-	} else {
-		debug("%s: Unknown codec type %s\n", __func__, codectype);
-		return -1;
-	}
-
-	if (ret) {
-		debug("%s: Codec init failed\n", __func__);
-		return -1;
-	}
-
-	return 0;
-}
-
-int sound_init(const void *blob)
-{
-	int ret;
-	struct i2stx_info *pi2s_tx = &g_i2stx_pri;
-
-	/* Get the I2S Values */
-	if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
-		debug(" FDT I2S values failed\n");
-		return -1;
-	}
-
-	if (codec_init(blob, pi2s_tx) < 0) {
-		debug(" Codec init failed\n");
-		return -1;
-	}
-
-	ret = i2s_tx_init(pi2s_tx);
-	if (ret) {
-		debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
-		      ret);
-		return ret;
-	}
-
-
-	return ret;
-}
-
-/*
- * Generates square wave sound data for 1 second
- *
- * @param data          data buffer pointer
- * @param size          size of the buffer
- * @param freq          frequency of the wave
- */
-static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq)
+void sound_create_square_wave(unsigned short *data, int size, uint32_t freq)
 {
 	const int sample = 48000;
 	const unsigned short amplitude = 16000; /* between 1 and 32767 */
@@ -218,39 +35,3 @@ static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq)
 		}
 	}
 }
-
-int sound_play(uint32_t msec, uint32_t frequency)
-{
-	unsigned int *data;
-	unsigned long data_size;
-	unsigned int ret = 0;
-
-	/*Buffer length computation */
-	data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
-	data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
-	data = malloc(data_size);
-
-	if (data == NULL) {
-		debug("%s: malloc failed\n", __func__);
-		return -1;
-	}
-
-	sound_prepare_buffer((unsigned short *)data,
-			     data_size / sizeof(unsigned short), frequency);
-
-	while (msec >= 1000) {
-		ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
-					   (data_size / sizeof(int)));
-		msec -= 1000;
-	}
-	if (msec) {
-		unsigned long size =
-			(data_size * msec) / (sizeof(int) * 1000);
-
-		ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
-	}
-
-	free(data);
-
-	return ret;
-}