drivers/net : move net drivers to drivers/net

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 0 insertions, 2417 deletions

diff --git a/drivers/sk98lin/skgesirq.c b/drivers/sk98lin/skgesirq.c
deleted file mode 100644
index e5a4f7e..0000000
--- a/drivers/sk98lin/skgesirq.c
+++ /dev/null
@@ -1,2417 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgesirq.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.83 $
- * Date:	$Date: 2003/02/05 15:10:59 $
- * Purpose:	Special IRQ module
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2003 SysKonnect GmbH.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * History:
- *
- *	$Log: skgesirq.c,v $
- *	Revision 1.83  2003/02/05 15:10:59  rschmidt
- *	Fixed setting of PLinkSpeedUsed in SkHWLinkUp() when
- *	auto-negotiation is disabled.
- *	Editorial changes.
- *
- *	Revision 1.82  2003/01/29 13:34:33  rschmidt
- *	Added some typecasts to avoid compiler warnings.
- *
- *	Revision 1.81  2002/12/05 10:49:51  rschmidt
- *	Fixed missing Link Down Event for fiber (Bug Id #10768)
- *	Added reading of cable length when link is up
- *	Removed testing of unused error bits in PHY ISR
- *	Editorial changes.
- *
- *	Revision 1.80  2002/11/12 17:15:21  rschmidt
- *	Replaced SkPnmiGetVar() by ...MacStatistic() in SkMacParity().
- *	Editorial changes.
- *
- *	Revision 1.79  2002/10/14 15:14:51  rschmidt
- *	Changed clearing of IS_M1_PAR_ERR (MAC 1 Parity Error) in
- *	SkMacParity() depending on GIChipRev (HW-Bug #8).
- *	Added error messages for GPHY Auto-Negotiation Error and
- *	FIFO Overflow/Underrun in SkPhyIsrGmac().
- *	Editorial changes.
- *
- *	Revision 1.78  2002/10/10 15:54:29  mkarl
- *	changes for PLinkSpeedUsed
- *
- *	Revision 1.77  2002/09/12 08:58:51  rwahl
- *	Retrieve counters needed for XMAC errata workarounds directly because
- *	PNMI returns corrected counter values (e.g. #10620).
- *
- *	Revision 1.76  2002/08/16 15:21:54  rschmidt
- *	Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis.
- *	Replaced wrong 1st para pAC with IoC in SK_IN/OUT macros.
- *	Editorial changes.
- *
- *	Revision 1.75  2002/08/12 13:50:47  rschmidt
- *	Changed clearing of IS_M1_PAR_ERR (MAC 1 Parity Error) in
- *	SkMacParity() by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE (HW-Bug #8).
- *	Added clearing of IS_IRQ_TIST_OV and IS_IRQ_SENSOR in SkGeHwErr().
- *	Corrected handling of Link Up and Auto-Negotiation Over for GPHY.
- *	in SkGePortCheckUpGmac().
- *	Editorial changes.
- *
- *	Revision 1.74  2002/08/08 16:17:04  rschmidt
- *	Added PhyType check for SK_HWEV_SET_ROLE event (copper only)
- *	Changed Link Up check reading PHY Specific Status (YUKON)
- *	Editorial changes
- *
- *	Revision 1.73  2002/07/15 18:36:53  rwahl
- *	Editorial changes.
- *
- *	Revision 1.72  2002/07/15 15:46:26  rschmidt
- *	Added new event: SK_HWEV_SET_SPEED
- *	Editorial changes
- *
- *	Revision 1.71  2002/06/10 09:34:19  rschmidt
- *	Editorial changes
- *
- *	Revision 1.70  2002/06/05 08:29:18  rschmidt
- *	SkXmRxTxEnable() replaced by SkMacRxTxEnable().
- *	Editorial changes.
- *
- *	Revision 1.69  2002/04/25 13:03:49  rschmidt
- *	Changes for handling YUKON.
- *	Use of #ifdef OTHER_PHY to eliminate code for unused Phy types.
- *	Replaced all XMAC-access macros by functions: SkMacRxTxDisable(),
- *	SkMacIrqDisable().
- *	Added handling for GMAC FIFO in SkMacParity().
- *	Replaced all SkXm...() functions with SkMac...() to handle also
- *	YUKON's GMAC.
- *	Macros for XMAC PHY access PHY_READ(), PHY_WRITE() replaced
- *	by functions SkXmPhyRead(), SkXmPhyWrite().
- *	Disabling all PHY interrupts moved to SkMacIrqDisable().
- *	Added handling for GPHY IRQ in SkGeSirqIsr().
- *	Removed status parameter from MAC IRQ handler SkMacIrq().
- *	Added SkGePortCheckUpGmac(), SkPhyIsrGmac() for GMAC.
- *	Editorial changes
- *
- *	Revision 1.68  2002/02/26 15:24:53  rwahl
- *	Fix: no link with manual configuration (#10673). The previous fix for
- *	#10639 was removed. So for RLMT mode = CLS the RLMT may switch to
- *	misconfigured port. It should not occur for the other RLMT modes.
- *
- *	Revision 1.67  2001/11/20 09:19:58  rwahl
- *	Reworked bugfix #10639 (no dependency to RLMT mode).
- *
- *	Revision 1.66  2001/10/26 07:52:53  afischer
- *	Port switching bug in `check local link` mode
- *
- *	Revision 1.65  2001/02/23 13:41:51  gklug
- *	fix: PHYS2INST should be used correctly for Dual Net operation
- *	chg: do no longer work with older PNMI
- *
- *	Revision 1.64  2001/02/15 11:27:04  rassmann
- *	Working with RLMT v1 if SK_MAX_NETS undefined.
- *
- *	Revision 1.63  2001/02/06 10:44:23  mkunz
- *	- NetIndex added to interface functions of pnmi V4 with dual net support
- *
- *	Revision 1.62  2001/01/31 15:31:41  gklug
- *	fix: problem with autosensing an SR8800 switch
- *
- *	Revision 1.61  2000/11/09 11:30:09  rassmann
- *	WA: Waiting after releasing reset until BCom chip is accessible.
- *
- *	Revision 1.60  2000/10/18 12:37:48  cgoos
- *	Reinserted the comment for version 1.56.
- *
- *	Revision 1.59  2000/10/18 12:22:20  cgoos
- *	Added workaround for half duplex hangup.
- *
- *	Revision 1.58  2000/09/28 13:06:04  gklug
- *	fix: BCom may NOT be touched if XMAC is in RESET state
- *
- *	Revision 1.57  2000/09/08 12:38:39  cgoos
- *	Added forgotten variable declaration.
- *
- *	Revision 1.56  2000/09/08 08:12:13  cgoos
- *	Changed handling of parity errors in SkGeHwErr (correct reset of error).
- *
- *	Revision 1.55  2000/06/19 08:36:25  cgoos
- *	Changed comment.
- *
- *	Revision 1.54  2000/05/22 08:45:57  malthoff
- *	Fix: #10523 is valid for all BCom PHYs.
- *
- *	Revision 1.53  2000/05/19 10:20:30  cgoos
- *	Removed Solaris debug output code.
- *
- *	Revision 1.52  2000/05/19 10:19:37  cgoos
- *	Added PHY state check in HWLinkDown.
- *	Move PHY interrupt code to IS_EXT_REG case in SkGeSirqIsr.
- *
- *	Revision 1.51  2000/05/18 05:56:20  cgoos
- *	Fixed typo.
- *
- *	Revision 1.50  2000/05/17 12:49:49  malthoff
- *	Fixes BCom link bugs (#10523).
- *
- *	Revision 1.49  1999/12/17 11:02:50  gklug
- *	fix: read PHY_STAT of Broadcom chip more often to assure good status
- *
- *	Revision 1.48  1999/12/06 10:01:17  cgoos
- *	Added SET function for Role.
- *
- *	Revision 1.47  1999/11/22 13:34:24  cgoos
- *	Changed license header to GPL.
- *
- *	Revision 1.46  1999/09/16 10:30:07  cgoos
- *	Removed debugging output statement from Linux.
- *
- *	Revision 1.45  1999/09/16 07:32:55  cgoos
- *	Fixed dual-port copperfield bug (PHY_READ from resetted port).
- *	Removed some unused variables.
- *
- *	Revision 1.44  1999/08/03 15:25:04  cgoos
- *	Removed workaround for disabled interrupts in half duplex mode.
- *
- *	Revision 1.43  1999/08/03 14:27:58  cgoos
- *	Removed SENSE mode code from SkGePortCheckUpBcom.
- *
- *	Revision 1.42  1999/07/26 09:16:54  cgoos
- *	Added some typecasts to avoid compiler warnings.
- *
- *	Revision 1.41  1999/05/19 07:28:59  cgoos
- *	Changes for 1000Base-T.
- *
- *	Revision 1.40  1999/04/08 13:59:39  gklug
- *	fix: problem with 3Com switches endless RESTARTs
- *
- *	Revision 1.39  1999/03/08 10:10:52  gklug
- *	fix: AutoSensing did switch to next mode even if LiPa indicated offline
- *
- *	Revision 1.38  1999/03/08 09:49:03  gklug
- *	fix: Bug using pAC instead of IoC, causing AIX problems
- *	fix: change compare for Linux compiler bug workaround
- *
- *	Revision 1.37  1999/01/28 14:51:33  gklug
- *	fix: monitor for autosensing and extra RESETS the RX on wire counters
- *
- *	Revision 1.36  1999/01/22 09:19:55  gklug
- *	fix: Init DupMode and InitPauseMd are now called in RxTxEnable
- *
- *	Revision 1.35  1998/12/11 15:22:59  gklug
- *	chg: autosensing: check for receive if manual mode was guessed
- *	chg: simplified workaround for XMAC errata
- *	chg: wait additional 100 ms before link goes up.
- *	chg: autoneg timeout to 600 ms
- *	chg: restart autoneg even if configured to autonegotiation
- *
- *	Revision 1.34  1998/12/10 10:33:14  gklug
- *	add: more debug messages
- *	fix: do a new InitPhy if link went down (AutoSensing problem)
- *	chg: Check for zero shorts if link is NOT up
- *	chg: reset Port if link goes down
- *	chg: wait additional 100 ms when link comes up to check shorts
- *	fix: dummy read extended autoneg status to prevent link going down immediately
- *
- *	Revision 1.33  1998/12/07 12:18:29  gklug
- *	add: refinement of autosense mode: take into account the autoneg cap of LiPa
- *
- *	Revision 1.32  1998/12/07 07:11:21  gklug
- *	fix: compiler warning
- *
- *	Revision 1.31  1998/12/02 09:29:05  gklug
- *	fix: WA XMAC Errata: FCSCt check was not correct.
- *	fix: WA XMAC Errata: Prec Counter were NOT updated in case of short checks.
- *	fix: Clear Stat : now clears the Prev counters of all known Ports
- *
- *	Revision 1.30  1998/12/01 10:54:15  gklug
- *	dd: workaround for XMAC errata changed. Check RX count and CRC err Count, too.
- *
- *	Revision 1.29  1998/12/01 10:01:53  gklug
- *	fix: if MAC IRQ occurs during port down, this will be handled correctly
- *
- *	Revision 1.28  1998/11/26 16:22:11  gklug
- *	fix: bug in autosense if manual modes are used
- *
- *	Revision 1.27  1998/11/26 15:50:06  gklug
- *	fix: PNMI needs to set PLinkModeConf
- *
- *	Revision 1.26  1998/11/26 14:51:58  gklug
- *	add: AutoSensing functionalty
- *
- *	Revision 1.25  1998/11/26 07:34:37  gklug
- *	fix: Init PrevShorts when restarting port due to Link connection
- *
- *	Revision 1.24  1998/11/25 10:57:32  gklug
- *	fix: remove unreferenced local vars
- *
- *	Revision 1.23  1998/11/25 08:26:40  gklug
- *	fix: don't do a RESET on a starting or stopping port
- *
- *	Revision 1.22  1998/11/24 13:29:44  gklug
- *	add: Workaround for MAC parity errata
- *
- *	Revision 1.21  1998/11/18 15:31:06  gklug
- *	fix: lint bugs
- *
- *	Revision 1.20  1998/11/18 12:58:54  gklug
- *	fix: use PNMI query instead of hardware access
- *
- *	Revision 1.19  1998/11/18 12:54:55  gklug
- *	chg: add new workaround for XMAC Errata
- *	add: short event counter monitoring on active link too
- *
- *	Revision 1.18  1998/11/13 14:27:41  malthoff
- *	Bug Fix: Packet Arbiter Timeout was not cleared correctly
- *	for timeout on TX1 and TX2.
- *
- *	Revision 1.17  1998/11/04 07:01:59  cgoos
- *	Moved HW link poll sequence.
- *	Added call to SkXmRxTxEnable.
- *
- *	Revision 1.16  1998/11/03 13:46:03  gklug
- *	add: functionality of SET_LMODE and SET_FLOW_MODE
- *	fix: send RLMT LinkDown event when Port stop is given with LinkUp
- *
- *	Revision 1.15  1998/11/03 12:56:47  gklug
- *	fix: Needs more events
- *
- *	Revision 1.14  1998/10/30 07:36:35  gklug
- *	rmv: unnecessary code
- *
- *	Revision 1.13  1998/10/29 15:21:57  gklug
- *	add: Poll link feature for activating HW link
- *	fix: Deactivate HWLink when Port STOP is given
- *
- *	Revision 1.12  1998/10/28 07:38:57  cgoos
- *	Checking link status at begin of SkHWLinkUp.
- *
- *	Revision 1.11  1998/10/22 09:46:50  gklug
- *	fix SysKonnectFileId typo
- *
- *	Revision 1.10  1998/10/14 13:57:47  gklug
- *	add: Port start/stop event
- *
- *	Revision 1.9  1998/10/14 05:48:29  cgoos
- *	Added definition for Para.
- *
- *	Revision 1.8  1998/10/14 05:40:09  gklug
- *	add: Hardware Linkup signal used
- *
- *	Revision 1.7  1998/10/09 06:50:20  malthoff
- *	Remove ID_sccs by SysKonnectFileId.
- *
- *	Revision 1.6  1998/10/08 09:11:49  gklug
- *	add: clear IRQ commands
- *
- *	Revision 1.5  1998/10/02 14:27:35  cgoos
- *	Fixed some typos and wrong event names.
- *
- *	Revision 1.4  1998/10/02 06:24:17  gklug
- *	add: HW error function
- *	fix: OUT macros
- *
- *	Revision 1.3  1998/10/01 07:03:00  gklug
- *	add: ISR for the usual interrupt source register
- *
- *	Revision 1.2  1998/09/03 13:50:33  gklug
- *	add: function prototypes
- *
- *	Revision 1.1  1998/08/27 11:50:21  gklug
- *	initial revision
- *
- *
- *
- ******************************************************************************/
-
-#include <config.h>
-
-#ifdef CONFIG_SK98
-
-/*
- *	Special Interrupt handler
- *
- *	The following abstract should show how this module is included
- *	in the driver path:
- *
- *	In the ISR of the driver the bits for frame transmission complete and
- *	for receive complete are checked and handled by the driver itself.
- *	The bits of the slow path mask are checked after that and then the
- *	entry into the so-called "slow path" is prepared. It is an implementors
- *	decision whether this is executed directly or just scheduled by
- *	disabling the mask. In the interrupt service routine some events may be
- *	generated, so it would be a good idea to call the EventDispatcher
- *	right after this ISR.
- *
- *	The Interrupt source register of the adapter is NOT read by this module.
- *  SO if the drivers implementor needs a while loop around the
- *	slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for
- *	each loop entered.
- *
- *	However, the MAC Interrupt status registers are read in a while loop.
- *
- */
-
-static const char SysKonnectFileId[] =
-	"$Id: skgesirq.c,v 1.83 2003/02/05 15:10:59 rschmidt Exp $" ;
-
-#include "h/skdrv1st.h"		/* Driver Specific Definitions */
-#include "h/skgepnmi.h"		/* PNMI Definitions */
-#include "h/skrlmt.h"		/* RLMT Definitions */
-#include "h/skdrv2nd.h"		/* Adapter Control and Driver specific Def. */
-
-/* local function prototypes */
-static int	SkGePortCheckUpXmac(SK_AC*, SK_IOC, int);
-static int	SkGePortCheckUpBcom(SK_AC*, SK_IOC, int);
-static int	SkGePortCheckUpGmac(SK_AC*, SK_IOC, int);
-static void	SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16);
-static void	SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16);
-#ifdef OTHER_PHY
-static int	SkGePortCheckUpLone(SK_AC*, SK_IOC, int);
-static int	SkGePortCheckUpNat(SK_AC*, SK_IOC, int);
-static void	SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16);
-#endif /* OTHER_PHY */
-
-/*
- * array of Rx counter from XMAC which are checked
- * in AutoSense mode to check whether a link is not able to auto-negotiate.
- */
-static const SK_U16 SkGeRxRegs[]= {
-	XM_RXF_64B,
-	XM_RXF_127B,
-	XM_RXF_255B,
-	XM_RXF_511B,
-	XM_RXF_1023B,
-	XM_RXF_MAX_SZ
-} ;
-
-#ifdef __C2MAN__
-/*
- *	Special IRQ function
- *
- *	General Description:
- *
- */
-intro()
-{}
-#endif
-
-/* Define return codes of SkGePortCheckUp and CheckShort */
-#define	SK_HW_PS_NONE		0	/* No action needed */
-#define	SK_HW_PS_RESTART	1	/* Restart needed */
-#define	SK_HW_PS_LINK		2	/* Link Up actions needed */
-
-/******************************************************************************
- *
- *	SkHWInitDefSense() - Default Autosensing mode initialization
- *
- * Description: sets the PLinkMode for HWInit
- *
- * Returns: N/A
- */
-static void SkHWInitDefSense(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	pPrt->PAutoNegTimeOut = 0;
-
-	if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
-		pPrt->PLinkMode = pPrt->PLinkModeConf;
-		return;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("AutoSensing: First mode %d on Port %d\n",
-		(int)SK_LMODE_AUTOFULL, Port));
-
-	pPrt->PLinkMode = SK_LMODE_AUTOFULL;
-
-	return;
-}	/* SkHWInitDefSense */
-
-
-/******************************************************************************
- *
- *	SkHWSenseGetNext() - Get Next Autosensing Mode
- *
- * Description: gets the appropriate next mode
- *
- * Note:
- *
- */
-SK_U8 SkHWSenseGetNext(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	pPrt->PAutoNegTimeOut = 0;
-
-	if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
-		/* Leave all as configured */
-		return(pPrt->PLinkModeConf);
-	}
-
-	if (pPrt->PLinkMode == SK_LMODE_AUTOFULL) {
-		/* Return next mode AUTOBOTH */
-		return(SK_LMODE_AUTOBOTH);
-	}
-
-	/* Return default autofull */
-	return(SK_LMODE_AUTOFULL);
-}	/* SkHWSenseGetNext */
-
-
-/******************************************************************************
- *
- *	SkHWSenseSetNext() - Autosensing Set next mode
- *
- * Description:	sets the appropriate next mode
- *
- * Returns: N/A
- */
-void SkHWSenseSetNext(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_U8	NewMode)	/* New Mode to be written in sense mode */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	pPrt->PAutoNegTimeOut = 0;
-
-	if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
-		return;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("AutoSensing: next mode %d on Port %d\n",
-		(int)NewMode, Port));
-
-	pPrt->PLinkMode = NewMode;
-
-	return;
-}	/* SkHWSenseSetNext */
-
-
-/******************************************************************************
- *
- *	SkHWLinkDown() - Link Down handling
- *
- * Description: handles the hardware link down signal
- *
- * Returns: N/A
- */
-void SkHWLinkDown(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Disable all MAC interrupts */
-	SkMacIrqDisable(pAC, IoC, Port);
-
-	/* Disable Receiver and Transmitter */
-	SkMacRxTxDisable(pAC, IoC, Port);
-
-	/* Init default sense mode */
-	SkHWInitDefSense(pAC, IoC, Port);
-
-	if (!pPrt->PHWLinkUp) {
-		return;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("Link down Port %d\n", Port));
-
-	/* Set Link to DOWN */
-	pPrt->PHWLinkUp = SK_FALSE;
-
-	/* Reset Port stati */
-	pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;
-	pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
-	pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_INDETERMINATED;
-
-	/* Re-init Phy especially when the AutoSense default is set now */
-	SkMacInitPhy(pAC, IoC, Port, SK_FALSE);
-
-	/* GP0: used for workaround of Rev. C Errata 2 */
-
-	/* Do NOT signal to RLMT */
-
-	/* Do NOT start the timer here */
-}	/* SkHWLinkDown */
-
-
-/******************************************************************************
- *
- *	SkHWLinkUp() - Link Up handling
- *
- * Description: handles the hardware link up signal
- *
- * Returns: N/A
- */
-void SkHWLinkUp(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		/* We do NOT need to proceed on active link */
-		return;
-	}
-
-	pPrt->PHWLinkUp = SK_TRUE;
-	pPrt->PAutoNegFail = SK_FALSE;
-	pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;
-
-	if (pPrt->PLinkMode != SK_LMODE_AUTOHALF &&
-	    pPrt->PLinkMode != SK_LMODE_AUTOFULL &&
-	    pPrt->PLinkMode != SK_LMODE_AUTOBOTH) {
-		/* Link is up and no Auto-negotiation should be done */
-
-		/* Link speed should be the configured one */
-		switch (pPrt->PLinkSpeed) {
-		case SK_LSPEED_AUTO:
-			/* default is 1000 Mbps */
-		case SK_LSPEED_1000MBPS:
-			pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_1000MBPS;
-			break;
-		case SK_LSPEED_100MBPS:
-			pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_100MBPS;
-			break;
-		case SK_LSPEED_10MBPS:
-			pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_10MBPS;
-			break;
-		}
-
-		/* Set Link Mode Status */
-		if (pPrt->PLinkMode == SK_LMODE_FULL) {
-			pPrt->PLinkModeStatus = SK_LMODE_STAT_FULL;
-		}
-		else {
-			pPrt->PLinkModeStatus = SK_LMODE_STAT_HALF;
-		}
-
-		/* No flow control without auto-negotiation */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
-
-		/* enable Rx/Tx */
-		SkMacRxTxEnable(pAC, IoC, Port);
-	}
-}	/* SkHWLinkUp */
-
-
-/******************************************************************************
- *
- *	SkMacParity() - MAC parity workaround
- *
- * Description: handles MAC parity errors correctly
- *
- * Returns: N/A
- */
-static void SkMacParity(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index of the port failed */
-{
-	SK_EVPARA	Para;
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_U32		TxMax;		/* TxMax Counter */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Clear IRQ Tx Parity Error */
-	if (pAC->GIni.GIGenesis) {
-		SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR);
-	}
-	else {
-		/* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */
-		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T),
-			(SK_U8)((pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE));
-	}
-
-	if (pPrt->PCheckPar) {
-		if (Port == MAC_1) {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG);
-		}
-		else {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG);
-		}
-		Para.Para64 = Port;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = Port;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-
-		return;
-	}
-
-	/* Check whether frames with a size of 1k were sent */
-	if (pAC->GIni.GIGenesis) {
-		/* Snap statistic counters */
-		(void)SkXmUpdateStats(pAC, IoC, Port);
-
-		(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax);
-	}
-	else {
-		(void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax);
-	}
-
-	if (TxMax > 0) {
-		/* From now on check the parity */
-		pPrt->PCheckPar = SK_TRUE;
-	}
-}	/* SkMacParity */
-
-
-/******************************************************************************
- *
- *	SkGeHwErr() - Hardware Error service routine
- *
- * Description: handles all HW Error interrupts
- *
- * Returns: N/A
- */
-static void SkGeHwErr(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-SK_U32	HwStatus)	/* Interrupt status word */
-{
-	SK_EVPARA	Para;
-	SK_U16		Word;
-
-	if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) {
-		/* PCI Errors occured */
-		if ((HwStatus & IS_IRQ_STAT) != 0) {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG);
-		}
-		else {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG);
-		}
-
-		/* Reset all bits in the PCI STATUS register */
-		SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
-
-		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-		SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS);
-		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
-		Para.Para64 = 0;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
-	}
-
-	if (pAC->GIni.GIGenesis) {
-		if ((HwStatus & IS_NO_STAT_M1) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT);
-		}
-
-		if ((HwStatus & IS_NO_STAT_M2) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT);
-		}
-
-		if ((HwStatus & IS_NO_TIST_M1) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST);
-		}
-
-		if ((HwStatus & IS_NO_TIST_M2) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST);
-		}
-	}
-	else {	/* YUKON */
-		/* This is necessary only for Rx timing measurements */
-		if ((HwStatus & IS_IRQ_TIST_OV) != 0) {
-			/* Clear Time Stamp Timer IRQ */
-			SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ);
-		}
-
-		if ((HwStatus & IS_IRQ_SENSOR) != 0) {
-			/* Clear I2C IRQ */
-			SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
-		}
-	}
-
-	if ((HwStatus & IS_RAM_RD_PAR) != 0) {
-		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR);
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG);
-		Para.Para64 = 0;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
-	}
-
-	if ((HwStatus & IS_RAM_WR_PAR) != 0) {
-		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR);
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG);
-		Para.Para64 = 0;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
-	}
-
-	if ((HwStatus & IS_M1_PAR_ERR) != 0) {
-		SkMacParity(pAC, IoC, MAC_1);
-	}
-
-	if ((HwStatus & IS_M2_PAR_ERR) != 0) {
-		SkMacParity(pAC, IoC, MAC_2);
-	}
-
-	if ((HwStatus & IS_R1_PAR_ERR) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P);
-
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((HwStatus & IS_R2_PAR_ERR) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P);
-
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-}	/* SkGeHwErr */
-
-
-/******************************************************************************
- *
- *	SkGeSirqIsr() - Special Interrupt Service Routine
- *
- * Description: handles all non data transfer specific interrupts (slow path)
- *
- * Returns: N/A
- */
-void SkGeSirqIsr(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-SK_U32	Istatus)	/* Interrupt status word */
-{
-	SK_EVPARA	Para;
-	SK_U32		RegVal32;	/* Read register value */
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	unsigned 	Len;
-	SK_U64		Octets;
-	SK_U16 		PhyInt;
-	SK_U16 		PhyIMsk;
-	int			i;
-
-	if ((Istatus & IS_HW_ERR) != 0) {
-		/* read the HW Error Interrupt source */
-		SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);
-
-		SkGeHwErr(pAC, IoC, RegVal32);
-	}
-
-	/*
-	 * Packet Timeout interrupts
-	 */
-	/* Check whether MACs are correctly initialized */
-	if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) &&
-		pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) {
-		/* MAC 1 was not initialized but Packet timeout occured */
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004,
-			SKERR_SIRQ_E004MSG);
-	}
-
-	if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) &&
-	    pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) {
-		/* MAC 2 was not initialized but Packet timeout occured */
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005,
-			SKERR_SIRQ_E005MSG);
-	}
-
-	if ((Istatus & IS_PA_TO_RX1) != 0) {
-		/* Means network is filling us up */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002,
-			SKERR_SIRQ_E002MSG);
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1);
-	}
-
-	if ((Istatus & IS_PA_TO_RX2) != 0) {
-		/* Means network is filling us up */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003,
-			SKERR_SIRQ_E003MSG);
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2);
-	}
-
-	if ((Istatus & IS_PA_TO_TX1) != 0) {
-
-		pPrt = &pAC->GIni.GP[0];
-
-		/* May be a normal situation in a server with a slow network */
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1);
-
-		/*
-		 * workaround: if in half duplex mode, check for Tx hangup.
-		 * Read number of TX'ed bytes, wait for 10 ms, then compare
-		 * the number with current value. If nothing changed, we assume
-		 * that Tx is hanging and do a FIFO flush (see event routine).
-		 */
-		if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
-		    pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
-		    !pPrt->HalfDupTimerActive) {
-			/*
-			 * many more pack. arb. timeouts may come in between,
-			 * we ignore those
-			 */
-			pPrt->HalfDupTimerActive = SK_TRUE;
-
-			Len = sizeof(SK_U64);
-			SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
-				&Len, (SK_U32) SK_PNMI_PORT_PHYS2INST(pAC, 0),
-				pAC->Rlmt.Port[0].Net->NetNumber);
-
-			pPrt->LastOctets = Octets;
-
-			Para.Para32[0] = 0;
-			SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
-				SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
-		}
-	}
-
-	if ((Istatus & IS_PA_TO_TX2) != 0) {
-
-		pPrt = &pAC->GIni.GP[1];
-
-		/* May be a normal situation in a server with a slow network */
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2);
-
-		/* workaround: see above */
-		if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
-		     pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
-		    !pPrt->HalfDupTimerActive) {
-			pPrt->HalfDupTimerActive = SK_TRUE;
-
-			Len = sizeof(SK_U64);
-			SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
-				&Len, (SK_U32) SK_PNMI_PORT_PHYS2INST(pAC, 1),
-				pAC->Rlmt.Port[1].Net->NetNumber);
-
-			pPrt->LastOctets = Octets;
-
-			Para.Para32[0] = 1;
-			SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
-				SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
-		}
-	}
-
-	/* Check interrupts of the particular queues */
-	if ((Istatus & IS_R1_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006,
-			SKERR_SIRQ_E006MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_R2_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007,
-			SKERR_SIRQ_E007MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XS1_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008,
-			SKERR_SIRQ_E008MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XA1_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009,
-			SKERR_SIRQ_E009MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XS2_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010,
-			SKERR_SIRQ_E010MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XA2_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011,
-			SKERR_SIRQ_E011MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	/* External reg interrupt */
-	if ((Istatus & IS_EXT_REG) != 0) {
-		/* Test IRQs from PHY */
-		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
-			pPrt = &pAC->GIni.GP[i];
-
-			if (pPrt->PState == SK_PRT_RESET) {
-				continue;
-			}
-
-			switch (pPrt->PhyType) {
-
-			case SK_PHY_XMAC:
-				break;
-
-			case SK_PHY_BCOM:
-				SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt);
-				SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_MASK, &PhyIMsk);
-
-				if ((PhyInt & ~PhyIMsk) != 0) {
-					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-						("Port %d Bcom Int: 0x%04X Mask: 0x%04X\n",
-						i, PhyInt, PhyIMsk));
-					SkPhyIsrBcom(pAC, IoC, i, PhyInt);
-				}
-				break;
-
-			case SK_PHY_MARV_COPPER:
-			case SK_PHY_MARV_FIBER:
-				SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt);
-				SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_MASK, &PhyIMsk);
-
-				if ((PhyInt & PhyIMsk) != 0) {
-					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-						("Port %d Marv Int: 0x%04X Mask: 0x%04X\n",
-						i, PhyInt, PhyIMsk));
-					SkPhyIsrGmac(pAC, IoC, i, PhyInt);
-				}
-				break;
-
-#ifdef OTHER_PHY
-			case SK_PHY_LONE:
-				SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt);
-				SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_ENAB, &PhyIMsk);
-
-				if ((PhyInt & PhyIMsk) != 0) {
-					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-						("Port %d Lone Int: %x Mask: %x\n",
-						i, PhyInt, PhyIMsk));
-					SkPhyIsrLone(pAC, IoC, i, PhyInt);
-				}
-				break;
-			case SK_PHY_NAT:
-				/* todo: National */
-				break;
-#endif /* OTHER_PHY */
-			}
-		}
-	}
-
-	/* I2C Ready interrupt */
-	if ((Istatus & IS_I2C_READY) != 0) {
-		SkI2cIsr(pAC, IoC);
-	}
-
-	if ((Istatus & IS_LNK_SYNC_M1) != 0) {
-		/*
-		 * We do NOT need the Link Sync interrupt, because it shows
-		 * us only a link going down.
-		 */
-		/* clear interrupt */
-		SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LED_CLR_IRQ);
-	}
-
-	/* Check MAC after link sync counter */
-	if ((Istatus & IS_MAC1) != 0) {
-		/* IRQ from MAC 1 */
-		SkMacIrq(pAC, IoC, MAC_1);
-	}
-
-	if ((Istatus & IS_LNK_SYNC_M2) != 0) {
-		/*
-		 * We do NOT need the Link Sync interrupt, because it shows
-		 * us only a link going down.
-		 */
-		/* clear interrupt */
-		SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LED_CLR_IRQ);
-	}
-
-	/* Check MAC after link sync counter */
-	if ((Istatus & IS_MAC2) != 0) {
-		/* IRQ from MAC 2 */
-		SkMacIrq(pAC, IoC, MAC_2);
-	}
-
-	/* Timer interrupt (served last) */
-	if ((Istatus & IS_TIMINT) != 0) {
-		SkHwtIsr(pAC, IoC);
-	}
-}	/* SkGeSirqIsr */
-
-
-/******************************************************************************
- *
- * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- */
-static int	SkGePortCheckShorts(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port)		/* Which port should be checked */
-{
-	SK_U32		Shorts;			/* Short Event Counter */
-	SK_U32		CheckShorts;	/* Check value for Short Event Counter */
-	SK_U64		RxCts;			/* Rx Counter (packets on network) */
-	SK_U32		RxTmp;			/* Rx temp. Counter */
-	SK_U32		FcsErrCts;		/* FCS Error Counter */
-	SK_GEPORT	*pPrt;			/* GIni Port struct pointer */
-	int			Rtv;			/* Return value */
-	int			i;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Default: no action */
-	Rtv = SK_HW_PS_NONE;
-
-	(void)SkXmUpdateStats(pAC, IoC, Port);
-
-	/* Extra precaution: check for short Event counter */
-	(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
-
-	/*
-	 * Read Rx counter (packets seen on the network and not necessarily
-	 * really received.
-	 */
-	RxCts = 0;
-
-	for (i = 0; i < sizeof(SkGeRxRegs)/sizeof(SkGeRxRegs[0]); i++) {
-		(void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp);
-		RxCts += (SK_U64)RxTmp;
-	}
-
-	/* On default: check shorts against zero */
-	CheckShorts = 0;
-
-	/* Extra precaution on active links */
-	if (pPrt->PHWLinkUp) {
-		/* Reset Link Restart counter */
-		pPrt->PLinkResCt = 0;
-		pPrt->PAutoNegTOCt = 0;
-
-		/* If link is up check for 2 */
-		CheckShorts = 2;
-
-		(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts);
-
-		if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-		    pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN &&
-		    (pPrt->PLinkMode == SK_LMODE_HALF ||
-			 pPrt->PLinkMode == SK_LMODE_FULL)) {
-			/*
-			 * This is autosensing and we are in the fallback
-			 * manual full/half duplex mode.
-			 */
-			if (RxCts == pPrt->PPrevRx) {
-				/* Nothing received, restart link */
-				pPrt->PPrevFcs = FcsErrCts;
-				pPrt->PPrevShorts = Shorts;
-
-				return(SK_HW_PS_RESTART);
-			}
-			else {
-				pPrt->PLipaAutoNeg = SK_LIPA_MANUAL;
-			}
-		}
-
-		if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) ||
-		    (!(FcsErrCts - pPrt->PPrevFcs))) {
-			/*
-			 * Note: The compare with zero above has to be done the way shown,
-			 * otherwise the Linux driver will have a problem.
-			 */
-			/*
-			 * We received a bunch of frames or no CRC error occured on the
-			 * network -> ok.
-			 */
-			pPrt->PPrevRx = RxCts;
-			pPrt->PPrevFcs = FcsErrCts;
-			pPrt->PPrevShorts = Shorts;
-
-			return(SK_HW_PS_NONE);
-		}
-
-		pPrt->PPrevFcs = FcsErrCts;
-	}
-
-
-	if ((Shorts - pPrt->PPrevShorts) > CheckShorts) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Short Event Count Restart Port %d \n", Port));
-		Rtv = SK_HW_PS_RESTART;
-	}
-
-	pPrt->PPrevShorts = Shorts;
-	pPrt->PPrevRx = RxCts;
-
-	return(Rtv);
-}	/* SkGePortCheckShorts */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUp() - Check if the link is up
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int	SkGePortCheckUp(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port)		/* Which port should be checked */
-{
-	switch (pAC->GIni.GP[Port].PhyType) {
-	case SK_PHY_XMAC:
-		return(SkGePortCheckUpXmac(pAC, IoC, Port));
-	case SK_PHY_BCOM:
-		return(SkGePortCheckUpBcom(pAC, IoC, Port));
-	case SK_PHY_MARV_COPPER:
-	case SK_PHY_MARV_FIBER:
-		return(SkGePortCheckUpGmac(pAC, IoC, Port));
-#ifdef OTHER_PHY
-	case SK_PHY_LONE:
-		return(SkGePortCheckUpLone(pAC, IoC, Port));
-	case SK_PHY_NAT:
-		return(SkGePortCheckUpNat(pAC, IoC, Port));
-#endif /* OTHER_PHY */
-	}
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUp */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpXmac(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port)		/* Which port should be checked */
-{
-	SK_U32		Shorts;		/* Short Event Counter */
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U32		GpReg;		/* General Purpose register value */
-	SK_U16		Isrc;		/* Interrupt source register */
-	SK_U16		IsrcSum;	/* Interrupt source register sum */
-	SK_U16		LpAb;		/* Link Partner Ability */
-	SK_U16		ResAb;		/* Resolved Ability */
-	SK_U16		ExtStat;	/* Extended Status Register */
-	SK_BOOL		AutoNeg;	/* Is Auto-negotiation used ? */
-	SK_U8		NextMode;	/* Next AutoSensing Mode */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		if (pPrt->PhyType != SK_PHY_XMAC) {
-			return(SK_HW_PS_NONE);
-		}
-		else {
-			return(SkGePortCheckShorts(pAC, IoC, Port));
-		}
-	}
-
-	IsrcSum = pPrt->PIsave;
-	pPrt->PIsave = 0;
-
-	/* Now wait for each port's link */
-	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-		AutoNeg = SK_FALSE;
-	}
-	else {
-		AutoNeg = SK_TRUE;
-	}
-
-	if (pPrt->PLinkBroken) {
-		/* Link was broken */
-		XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
-
-		if ((GpReg & XM_GP_INP_ASS) == 0) {
-			/* The Link is in sync */
-			XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-			IsrcSum |= Isrc;
-			SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
-
-			if ((Isrc & XM_IS_INP_ASS) == 0) {
-				/* It has been in sync since last time */
-				/* Restart the PORT */
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-					("Link in sync Restart Port %d\n", Port));
-
-				(void)SkXmUpdateStats(pAC, IoC, Port);
-
-				/* We now need to reinitialize the PrevShorts counter */
-				(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
-				pPrt->PPrevShorts = Shorts;
-
-				pPrt->PLinkBroken = SK_FALSE;
-
-				/*
-				 * Link Restart Workaround:
-				 *  it may be possible that the other Link side
-				 *  restarts its link as well an we detect
-				 *  another LinkBroken. To prevent this
-				 *  happening we check for a maximum number
-				 *  of consecutive restart. If those happens,
-				 *  we do NOT restart the active link and
-				 *  check whether the link is now o.k.
-				 */
-				pPrt->PLinkResCt++;
-
-				pPrt->PAutoNegTimeOut = 0;
-
-				if (pPrt->PLinkResCt < SK_MAX_LRESTART) {
-					return(SK_HW_PS_RESTART);
-				}
-
-				pPrt->PLinkResCt = 0;
-
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum));
-			}
-			else {
-				pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
-
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum));
-
-				/* Do nothing more if link is broken */
-				return(SK_HW_PS_NONE);
-			}
-		}
-		else {
-			/* Do nothing more if link is broken */
-			return(SK_HW_PS_NONE);
-		}
-
-	}
-	else {
-		/* Link was not broken, check if it is */
-		XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-		IsrcSum |= Isrc;
-		if ((Isrc & XM_IS_INP_ASS) != 0) {
-			XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-			IsrcSum |= Isrc;
-			if ((Isrc & XM_IS_INP_ASS) != 0) {
-				XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-				IsrcSum |= Isrc;
-				if ((Isrc & XM_IS_INP_ASS) != 0) {
-					pPrt->PLinkBroken = SK_TRUE;
-					/* Re-Init Link partner Autoneg flag */
-					pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
-					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-						("Link broken Port %d\n", Port));
-
-					/* Cable removed-> reinit sense mode */
-					SkHWInitDefSense(pAC, IoC, Port);
-
-					return(SK_HW_PS_RESTART);
-				}
-			}
-		}
-		else {
-			SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc);
-			if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) {
-				return(SK_HW_PS_RESTART);
-			}
-		}
-	}
-
-	/*
-	 * here we usually can check whether the link is in sync and
-	 * auto-negotiation is done.
-	 */
-	XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
-	XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-	IsrcSum |= Isrc;
-
-	SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
-
-	if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) {
-		if ((GpReg & XM_GP_INP_ASS) == 0) {
-			/* Save Auto-negotiation Done interrupt only if link is in sync */
-			pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
-		}
-#ifdef DEBUG
-		if ((pPrt->PIsave & XM_IS_AND) != 0) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("AutoNeg done rescheduled Port %d\n", Port));
-		}
-#endif /* DEBUG */
-		return(SK_HW_PS_NONE);
-	}
-
-	if (AutoNeg) {
-		if ((IsrcSum & XM_IS_AND) != 0) {
-			SkHWLinkUp(pAC, IoC, Port);
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			if (Done != SK_AND_OK) {
-				/* Get PHY parameters, for debugging only */
-				SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb);
-				SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n",
-					 Port, LpAb, ResAb));
-
-				/* Try next possible mode */
-				NextMode = SkHWSenseGetNext(pAC, IoC, Port);
-				SkHWLinkDown(pAC, IoC, Port);
-				if (Done == SK_AND_DUP_CAP) {
-					/* GoTo next mode */
-					SkHWSenseSetNext(pAC, IoC, Port, NextMode);
-				}
-
-				return(SK_HW_PS_RESTART);
-			}
-			/*
-			 * Dummy Read extended status to prevent extra link down/ups
-			 * (clear Page Received bit if set)
-			 */
-			SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat);
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("AutoNeg done Port %d\n", Port));
-			return(SK_HW_PS_LINK);
-		}
-
-		/* AutoNeg not done, but HW link is up. Check for timeouts */
-		pPrt->PAutoNegTimeOut++;
-		if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
-			/* Increase the Timeout counter */
-			pPrt->PAutoNegTOCt++;
-
-			/* Timeout occured */
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-				("AutoNeg timeout Port %d\n", Port));
-			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-				pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
-				/* Set Link manually up */
-				SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-					("Set manual full duplex Port %d\n", Port));
-			}
-
-			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-				pPrt->PLipaAutoNeg == SK_LIPA_AUTO &&
-				pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) {
-				/*
-				 * This is rather complicated.
-				 * we need to check here whether the LIPA_AUTO
-				 * we saw before is false alert. We saw at one
-				 * switch ( SR8800) that on boot time it sends
-				 * just one auto-neg packet and does no further
-				 * auto-negotiation.
-				 * Solution: we restart the autosensing after
-				 * a few timeouts.
-				 */
-				pPrt->PAutoNegTOCt = 0;
-				pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
-				SkHWInitDefSense(pAC, IoC, Port);
-			}
-
-			/* Do the restart */
-			return(SK_HW_PS_RESTART);
-		}
-	}
-	else {
-		/* Link is up and we don't need more */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync(GP), Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-
-		/*
-		 * Link sync (GP) and so assume a good connection. But if not received
-		 * a bunch of frames received in a time slot (maybe broken tx cable)
-		 * the port is restart.
-		 */
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpXmac */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpBcom(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC,	/* IO Context */
-int		Port)	/* Which port should be checked */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U16		Isrc;		/* Interrupt source register */
-	SK_U16		PhyStat;	/* Phy Status Register */
-	SK_U16		ResAb;		/* Master/Slave resolution */
-	SK_U16		Ctrl;		/* Broadcom control flags */
-#ifdef DEBUG
-	SK_U16		LpAb;
-	SK_U16		ExtStat;
-#endif /* DEBUG */
-	SK_BOOL		AutoNeg;	/* Is Auto-negotiation used ? */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Check for No HCD Link events (#10523) */
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc);
-
-#ifdef xDEBUG
-	if ((Isrc & ~(PHY_B_IS_HCT | PHY_B_IS_LCT) ==
-		(PHY_B_IS_SCR_S_ER | PHY_B_IS_RRS_CHANGE | PHY_B_IS_LRS_CHANGE)) {
-
-		SK_U32	Stat1, Stat2, Stat3;
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1);
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"CheckUp1 - Stat: %x, Mask: %x",
-			(void *)Isrc,
-			(void *)Stat1);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"Ctrl/Stat: %x, AN Adv/LP: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-	}
-#endif /* DEBUG */
-
-	if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) {
-		/*
-		 * Workaround BCom Errata:
-		 *	enable and disable loopback mode if "NO HCD" occurs.
-		 */
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl);
-		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
-			(SK_U16)(Ctrl | PHY_CT_LOOP));
-		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
-			(SK_U16)(Ctrl & ~PHY_CT_LOOP));
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("No HCD Link event, Port %d\n", Port));
-#ifdef xDEBUG
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"No HCD link event, port %d.",
-			(void *)Port,
-			(void *)NULL);
-#endif /* DEBUG */
-	}
-
-	/* Not obsolete: link status bit is latched to 0 and autoclearing! */
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
-
-	if (pPrt->PHWLinkUp) {
-		return(SK_HW_PS_NONE);
-	}
-
-#ifdef xDEBUG
-	{
-		SK_U32	Stat1, Stat2, Stat3;
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1);
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"CheckUp1a - Stat: %x, Mask: %x",
-			(void *)Isrc,
-			(void *)Stat1);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
-		Stat1 = Stat1 << 16 | PhyStat;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"Ctrl/Stat: %x, AN Adv/LP: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
-		Stat2 = Stat2 << 16 | ResAb;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-	}
-#endif /* DEBUG */
-
-	/* Now wait for each port's link */
-	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-		AutoNeg = SK_FALSE;
-	}
-	else {
-		AutoNeg = SK_TRUE;
-	}
-
-	/*
-	 * Here we usually can check whether the link is in sync and
-	 * auto-negotiation is done.
-	 */
-
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
-
-	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNeg: %d, PhyStat: 0x%04x\n", AutoNeg, PhyStat));
-
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
-
-	if ((ResAb & PHY_B_1000S_MSF) != 0) {
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Master/Slave Fault port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		pPrt->PMSStatus = SK_MS_STAT_FAULT;
-
-		return(SK_HW_PS_RESTART);
-	}
-
-	if ((PhyStat & PHY_ST_LSYNC) == 0) {
-		return(SK_HW_PS_NONE);
-	}
-
-	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
-		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNeg: %d, PhyStat: 0x%04x\n", AutoNeg, PhyStat));
-
-	if (AutoNeg) {
-		if ((PhyStat & PHY_ST_AN_OVER) != 0) {
-			SkHWLinkUp(pAC, IoC, Port);
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			if (Done != SK_AND_OK) {
-#ifdef DEBUG
-				/* Get PHY parameters, for debugging only */
-				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb);
-				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
-					Port, LpAb, ExtStat));
-#endif /* DEBUG */
-				return(SK_HW_PS_RESTART);
-			}
-			else {
-#ifdef xDEBUG
-				/* Dummy read ISR to prevent extra link downs/ups */
-				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat);
-
-				if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) {
-					CMSMPrintString(
-						pAC->pConfigTable,
-						MSG_TYPE_RUNTIME_INFO,
-						"CheckUp2 - Stat: %x",
-						(void *)ExtStat,
-						(void *)NULL);
-				}
-#endif /* DEBUG */
-
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg done Port %d\n", Port));
-				return(SK_HW_PS_LINK);
-			}
-		}
-	}
-	else {	/* !AutoNeg */
-		/* Link is up and we don't need more. */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-
-#ifdef xDEBUG
-		/* Dummy read ISR to prevent extra link downs/ups */
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat);
-
-		if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) {
-			CMSMPrintString(
-				pAC->pConfigTable,
-				MSG_TYPE_RUNTIME_INFO,
-				"CheckUp3 - Stat: %x",
-				(void *)ExtStat,
-				(void *)NULL);
-		}
-#endif /* DEBUG */
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync(GP), Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpBcom */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpGmac(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC,	/* IO Context */
-int		Port)	/* Which port should be checked */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U16		Isrc;		/* Interrupt source */
-	SK_U16		PhyStat;	/* Phy Status */
-	SK_U16		PhySpecStat;/* Phy Specific Status */
-	SK_U16		ResAb;		/* Master/Slave resolution */
-	SK_BOOL		AutoNeg;	/* Is Auto-negotiation used ? */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Read PHY Interrupt Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &Isrc);
-
-	if ((Isrc & PHY_M_IS_AN_COMPL) != 0) {
-		/* TBD */
-	}
-
-	if ((Isrc & PHY_M_IS_DOWNSH_DET) != 0) {
-		/* TBD */
-	}
-
-	if (pPrt->PHWLinkUp) {
-		return(SK_HW_PS_NONE);
-	}
-
-	/* Now wait for each port's link */
-	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-		AutoNeg = SK_FALSE;
-	}
-	else {
-		AutoNeg = SK_TRUE;
-	}
-
-	/* Read PHY Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNeg: %d, PhyStat: 0x%04x\n", AutoNeg, PhyStat));
-
-	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
-
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);
-
-	if ((ResAb & PHY_B_1000S_MSF) != 0) {
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Master/Slave Fault port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		pPrt->PMSStatus = SK_MS_STAT_FAULT;
-
-		return(SK_HW_PS_RESTART);
-	}
-
-	/* Read PHY Specific Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNeg: %d, PhySpecStat: 0x%04x\n", AutoNeg, PhySpecStat));
-
-	if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) {
-		return(SK_HW_PS_NONE);
-	}
-
-	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
-		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
-
-	pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7);
-
-	if (AutoNeg) {
-		/* Auto-Negotiation Over ? */
-		if ((PhyStat & PHY_ST_AN_OVER) != 0) {
-
-			SkHWLinkUp(pAC, IoC, Port);
-
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-
-			if (Done != SK_AND_OK) {
-				return(SK_HW_PS_RESTART);
-			}
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("AutoNeg done Port %d\n", Port));
-			return(SK_HW_PS_LINK);
-		}
-	}
-	else {	/* !AutoNeg */
-		/* Link is up and we don't need more */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync, Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpGmac */
-
-
-#ifdef OTHER_PHY
-/******************************************************************************
- *
- * SkGePortCheckUpLone() - Check if the link is up on Level One PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpLone(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port)		/* Which port should be checked */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U16		Isrc;		/* Interrupt source register */
-	SK_U16		LpAb;		/* Link Partner Ability */
-	SK_U16		ExtStat;	/* Extended Status Register */
-	SK_U16		PhyStat;	/* Phy Status Register */
-	SK_U16		StatSum;
-	SK_BOOL		AutoNeg;	/* Is Auto-negotiation used ? */
-	SK_U8		NextMode;	/* Next AutoSensing Mode */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		return(SK_HW_PS_NONE);
-	}
-
-	StatSum = pPrt->PIsave;
-	pPrt->PIsave = 0;
-
-	/* Now wait for each ports link */
-	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-		AutoNeg = SK_FALSE;
-	}
-	else {
-		AutoNeg = SK_TRUE;
-	}
-
-	/*
-	 * here we usually can check whether the link is in sync and
-	 * auto-negotiation is done.
-	 */
-	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat);
-	StatSum |= PhyStat;
-
-	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
-
-	if ((PhyStat & PHY_ST_LSYNC) == 0) {
-		/* Save Auto-negotiation Done bit */
-		pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER);
-#ifdef DEBUG
-		if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("AutoNeg done rescheduled Port %d\n", Port));
-		}
-#endif /* DEBUG */
-		return(SK_HW_PS_NONE);
-	}
-
-	if (AutoNeg) {
-		if ((StatSum & PHY_ST_AN_OVER) != 0) {
-			SkHWLinkUp(pAC, IoC, Port);
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			if (Done != SK_AND_OK) {
-				/* Get PHY parameters, for debugging only */
-				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb);
-				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
-					 Port, LpAb, ExtStat));
-
-				/* Try next possible mode */
-				NextMode = SkHWSenseGetNext(pAC, IoC, Port);
-				SkHWLinkDown(pAC, IoC, Port);
-				if (Done == SK_AND_DUP_CAP) {
-					/* GoTo next mode */
-					SkHWSenseSetNext(pAC, IoC, Port, NextMode);
-				}
-
-				return(SK_HW_PS_RESTART);
-
-			}
-			else {
-				/*
-				 * Dummy Read interrupt status to prevent
-				 * extra link down/ups
-				 */
-				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg done Port %d\n", Port));
-				return(SK_HW_PS_LINK);
-			}
-		}
-
-		/* AutoNeg not done, but HW link is up. Check for timeouts */
-		pPrt->PAutoNegTimeOut++;
-		if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
-			/* Timeout occured */
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-				("AutoNeg timeout Port %d\n", Port));
-			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-				pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
-				/* Set Link manually up */
-				SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-					("Set manual full duplex Port %d\n", Port));
-			}
-
-			/* Do the restart */
-			return(SK_HW_PS_RESTART);
-		}
-	}
-	else {
-		/* Link is up and we don't need more */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-
-		/*
-		 * Dummy Read interrupt status to prevent
-		 * extra link down/ups
-		 */
-		SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync(GP), Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpLone */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUpNat() - Check if the link is up on National PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpNat(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port)		/* Which port should be checked */
-{
-	/* todo: National */
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpNat */
-#endif /* OTHER_PHY */
-
-
-/******************************************************************************
- *
- *	SkGeSirqEvent() - Event Service Routine
- *
- * Description:
- *
- * Notes:
- */
-int	SkGeSirqEvent(
-SK_AC		*pAC,		/* Adapter Context */
-SK_IOC		IoC,		/* Io Context */
-SK_U32		Event,		/* Module specific Event */
-SK_EVPARA	Para)		/* Event specific Parameter */
-{
-	SK_U64		Octets;
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_U32		Port;
-	SK_U32		Time;
-	unsigned	Len;
-	int			PortStat;
-	SK_U8		Val8;
-
-	Port = Para.Para32[0];
-	pPrt = &pAC->GIni.GP[Port];
-
-	switch (Event) {
-	case SK_HWEV_WATIM:
-		/* Check whether port came up */
-		PortStat = SkGePortCheckUp(pAC, IoC, Port);
-
-		switch (PortStat) {
-		case SK_HW_PS_RESTART:
-			if (pPrt->PHWLinkUp) {
-				/*
-				 * Set Link to down.
-				 */
-				SkHWLinkDown(pAC, IoC, Port);
-
-				/*
-				 * Signal directly to RLMT to ensure correct
-				 * sequence of SWITCH and RESET event.
-				 */
-				SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
-			}
-
-			/* Restart needed */
-			SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
-			break;
-
-		case SK_HW_PS_LINK:
-			/* Signal to RLMT */
-			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para);
-			break;
-
-		}
-
-		/* Start again the check Timer */
-		if (pPrt->PHWLinkUp) {
-			Time = SK_WA_ACT_TIME;
-		}
-		else {
-			Time = SK_WA_INA_TIME;
-		}
-
-		/* Todo: still needed for non-XMAC PHYs??? */
-		/* Start workaround Errata #2 timer */
-		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Time,
-			SKGE_HWAC, SK_HWEV_WATIM, Para);
-		break;
-
-	case SK_HWEV_PORT_START:
-		if (pPrt->PHWLinkUp) {
-			/*
-			 * Signal directly to RLMT to ensure correct
-			 * sequence of SWITCH and RESET event.
-			 */
-			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
-		}
-
-		SkHWLinkDown(pAC, IoC, Port);
-
-		/* Schedule Port RESET */
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
-
-		/* Start workaround Errata #2 timer */
-		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
-			SKGE_HWAC, SK_HWEV_WATIM, Para);
-		break;
-
-	case SK_HWEV_PORT_STOP:
-		if (pPrt->PHWLinkUp) {
-			/*
-			 * Signal directly to RLMT to ensure correct
-			 * sequence of SWITCH and RESET event.
-			 */
-			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
-		}
-
-		/* Stop Workaround Timer */
-		SkTimerStop(pAC, IoC, &pPrt->PWaTimer);
-
-		SkHWLinkDown(pAC, IoC, Port);
-		break;
-
-	case SK_HWEV_UPDATE_STAT:
-		/* We do NOT need to update any statistics */
-		break;
-
-	case SK_HWEV_CLEAR_STAT:
-		/* We do NOT need to clear any statistics */
-		for (Port = 0; Port < (SK_U32)pAC->GIni.GIMacsFound; Port++) {
-			pPrt->PPrevRx = 0;
-			pPrt->PPrevFcs = 0;
-			pPrt->PPrevShorts = 0;
-		}
-		break;
-
-	case SK_HWEV_SET_LMODE:
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PLinkModeConf != Val8) {
-			/* Set New link mode */
-			pPrt->PLinkModeConf = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-	case SK_HWEV_SET_FLOWMODE:
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PFlowCtrlMode != Val8) {
-			/* Set New Flow Control mode */
-			pPrt->PFlowCtrlMode = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-	case SK_HWEV_SET_ROLE:
-		/* not possible for fiber */
-		if (!pAC->GIni.GICopperType) {
-			break;
-		}
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PMSMode != Val8) {
-			/* Set New link mode */
-			pPrt->PMSMode = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-	case SK_HWEV_SET_SPEED:
-		if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
-			break;
-		}
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PLinkSpeed != Val8) {
-			/* Set New Speed parameter */
-			pPrt->PLinkSpeed = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-	case SK_HWEV_HALFDUP_CHK:
-		/*
-		 * half duplex hangup workaround.
-		 * See packet arbiter timeout interrupt for description
-		 */
-		pPrt->HalfDupTimerActive = SK_FALSE;
-		if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
-		    pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) {
-
-			Len = sizeof(SK_U64);
-			SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
-				&Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, Port),
-				pAC->Rlmt.Port[Port].Net->NetNumber);
-
-			if (pPrt->LastOctets == Octets) {
-				/* Tx hanging, a FIFO flush restarts it */
-				SkMacFlushTxFifo(pAC, IoC, Port);
-			}
-		}
-		break;
-
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG);
-		break;
-	}
-
-	return(0);
-}	/* SkGeSirqEvent */
-
-
-/******************************************************************************
- *
- *	SkPhyIsrBcom() - PHY interrupt service routine
- *
- * Description: handles all interrupts from BCom PHY
- *
- * Returns: N/A
- */
-static void SkPhyIsrBcom(
-SK_AC		*pAC,		/* Adapter Context */
-SK_IOC		IoC,		/* Io Context */
-int			Port,		/* Port Num = PHY Num */
-SK_U16		IStatus)	/* Interrupt Status */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_EVPARA	Para;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if ((IStatus & PHY_B_IS_PSE) != 0) {
-		/* Incorrectable pair swap error */
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E022,
-			SKERR_SIRQ_E022MSG);
-	}
-
-	if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) {
-		Para.Para32[0] = (SK_U32)Port;
-
-		SkHWLinkDown(pAC, IoC, Port);
-
-		/* Signal to RLMT */
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-
-		/* Start workaround Errata #2 timer */
-		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
-			SKGE_HWAC, SK_HWEV_WATIM, Para);
-	}
-
-}	/* SkPhyIsrBcom */
-
-
-/******************************************************************************
- *
- *	SkPhyIsrGmac() - PHY interrupt service routine
- *
- * Description: handles all interrupts from Marvell PHY
- *
- * Returns: N/A
- */
-static void SkPhyIsrGmac(
-SK_AC		*pAC,		/* Adapter Context */
-SK_IOC		IoC,		/* Io Context */
-int			Port,		/* Port Num = PHY Num */
-SK_U16		IStatus)	/* Interrupt Status */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_EVPARA	Para;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if ((IStatus & (PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE)) != 0) {
-		Para.Para32[0] = (SK_U32)Port;
-
-		SkHWLinkDown(pAC, IoC, Port);
-
-		/* Signal to RLMT */
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((IStatus & PHY_M_IS_AN_ERROR) != 0) {
-		/* Auto-Negotiation Error */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG);
-	}
-
-	if ((IStatus & PHY_M_IS_LSP_CHANGE) != 0) {
-		/* TBD */
-	}
-
-	if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) {
-		/* FIFO Overflow/Underrun Error */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG);
-	}
-}	/* SkPhyIsrGmac */
-
-
-#ifdef OTHER_PHY
-/******************************************************************************
- *
- *	SkPhyIsrLone() - PHY interrupt service routine
- *
- * Description: handles all interrupts from LONE PHY
- *
- * Returns: N/A
- */
-static void SkPhyIsrLone(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* Io Context */
-int		Port,		/* Port Num = PHY Num */
-SK_U16	IStatus)	/* Interrupt Status */
-{
-	SK_EVPARA	Para;
-
-	if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) {
-		SkHWLinkDown(pAC, IoC, Port);
-
-		/* Signal to RLMT */
-		Para.Para32[0] = (SK_U32)Port;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-}	/* SkPhyIsrLone */
-#endif /* OTHER_PHY */
-
-#endif /* CONFIG_SK98 */
-
-/* End of File */