* Add support for SK98xx driver

* Add PCI support for SL8245 board

* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
  or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
  Run IPB at 133 Mhz; adjust the MII clock frequency accordingly

* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16  MHz)
  to allow for more accurate baudrate settings
  (error now 0.7% at 115 kbps, instead of 3.5% before)

* Patch by Andreas Mohr, 4 Sep 2003:
  Fix a lot of spelling errors

1 files changed, 119 insertions, 0 deletions

diff --git a/drivers/sk98lin/h/skdebug.h b/drivers/sk98lin/h/skdebug.h
new file mode 100644
index 0000000..cc14e1c
--- /dev/null
+++ b/drivers/sk98lin/h/skdebug.h
@@ -0,0 +1,119 @@
+/******************************************************************************
+ *
+ * Name:	skdebug.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.12 $
+ * Date:	$Date: 2002/07/15 15:37:13 $
+ * Purpose:	SK specific DEBUG support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *	$Log: skdebug.h,v $
+ *	Revision 1.12  2002/07/15 15:37:13  rschmidt
+ *	Power Management support
+ *	Editorial changes
+ *	
+ *	Revision 1.11  2002/04/25 11:04:39  rschmidt
+ *	Editorial changes
+ *	
+ *	Revision 1.10  1999/11/22 13:47:40  cgoos
+ *	Changed license header to GPL.
+ *	
+ *	Revision 1.9  1999/09/14 14:02:43  rwahl
+ *	Added SK_DBGMOD_PECP.
+ *	
+ *	Revision 1.8  1998/11/25 08:31:54  gklug
+ *	fix: no C++ comments allowed in common sources
+ *	
+ *	Revision 1.7  1998/11/24 16:47:24  swolf
+ *	Driver may now define its own SK_DBG_MSG() (eg. in "h/skdrv1st.h").
+ *	
+ *	Revision 1.6  1998/10/28 10:23:55  rassmann
+ *	ADDED SK_DBGMOD_ADDR.
+ *	
+ *	Revision 1.5  1998/10/22 09:43:55  gklug
+ *	add: CSUM module
+ *	
+ *	Revision 1.4  1998/10/01 07:54:44  gklug
+ *	add: PNMI debug module
+ *	
+ *	Revision 1.3  1998/09/18 08:32:34  afischer
+ *	Macros changed according ssr-spec.:
+ *		SK_DBG_MODCHK -> SK_DBG_CHKMOD
+ *		SK_DBG_CATCHK -> SK_DBG_CHKCAT
+ *	
+ *	Revision 1.2  1998/07/03 14:38:25  malthoff
+ *	Add category SK_DBGCAT_FATAL.
+ *	
+ *	Revision 1.1  1998/06/19 13:39:01  malthoff
+ *	created.
+ *	
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDEBUG_H
+#define __INC_SKDEBUG_H
+
+#ifdef	DEBUG
+#ifndef SK_DBG_MSG
+#define SK_DBG_MSG(pAC,comp,cat,arg) \
+		if ( ((comp) & SK_DBG_CHKMOD(pAC)) && 	\
+		      ((cat) & SK_DBG_CHKCAT(pAC)) ) { 	\
+			SK_DBG_PRINTF arg ;		\
+		}
+#endif
+#else
+#define SK_DBG_MSG(pAC,comp,lev,arg)
+#endif
+
+/* PLS NOTE:
+ * =========
+ * Due to any restrictions of kernel printf routines do not use other
+ * format identifiers as: %x %d %c %s .
+ * Never use any combined format identifiers such as: %lx %ld in your
+ * printf - argument (arg) because some OS specific kernel printfs may
+ * only support some basic identifiers.
+ */
+
+/* Debug modules */
+
+#define SK_DBGMOD_MERR	0x00000001L	/* general module error indication */
+#define SK_DBGMOD_HWM	0x00000002L	/* Hardware init module */
+#define SK_DBGMOD_RLMT	0x00000004L	/* RLMT module */
+#define SK_DBGMOD_VPD	0x00000008L	/* VPD module */
+#define SK_DBGMOD_I2C	0x00000010L	/* I2C module */
+#define SK_DBGMOD_PNMI	0x00000020L	/* PNMI module */
+#define SK_DBGMOD_CSUM	0x00000040L	/* CSUM module */
+#define SK_DBGMOD_ADDR	0x00000080L	/* ADDR module */
+#define SK_DBGMOD_PECP	0x00000100L	/* PECP module */
+#define SK_DBGMOD_POWM	0x00000200L	/* Power Management module */
+
+/* Debug events */
+
+#define SK_DBGCAT_INIT	0x00000001L	/* module/driver initialization */
+#define SK_DBGCAT_CTRL	0x00000002L	/* controlling devices */
+#define SK_DBGCAT_ERR	0x00000004L	/* error handling paths */
+#define SK_DBGCAT_TX	0x00000008L	/* transmit path */
+#define SK_DBGCAT_RX	0x00000010L	/* receive path */
+#define SK_DBGCAT_IRQ	0x00000020L	/* general IRQ handling */
+#define SK_DBGCAT_QUEUE	0x00000040L	/* any queue management */
+#define SK_DBGCAT_DUMP	0x00000080L	/* large data output e.g. hex dump */
+#define SK_DBGCAT_FATAL	0x00000100L	/* fatal error */
+
+#endif	/* __INC_SKDEBUG_H */