Code cleanup; make several boards compile & link.

1 files changed, 86 insertions, 88 deletions

diff --git a/drivers/serial_pl011.c b/drivers/serial_pl011.c
index 60fcc91..0e13226 100644
--- a/drivers/serial_pl011.c
+++ b/drivers/serial_pl011.c
@@ -38,138 +38,136 @@
 #define IO_READ(addr) (*(volatile unsigned int *)(addr))
 
 /*
- * IntegratorCP has two UARTs, use the first one, at 38400-8-N-1 
+ * IntegratorCP has two UARTs, use the first one, at 38400-8-N-1
  * Versatile PB has four UARTs.
  */
 #define NUM_PORTS 2
 #define CONSOLE_PORT CONFIG_CONS_INDEX
 #define baudRate CONFIG_BAUDRATE
-static volatile unsigned char * const port[NUM_PORTS] = {(void*)(CFG_SERIAL0),
-                                                         (void*)(CFG_SERIAL1)};
+static volatile unsigned char *const port[NUM_PORTS] = {
+	(void *) (CFG_SERIAL0),
+	(void *) (CFG_SERIAL1)
+};
 
 
-static void pl011_putc(int portnum, char c);
-static int pl011_getc(int portnum);
-static int pl011_tstc(int portnum);
+static void pl011_putc (int portnum, char c);
+static int pl011_getc (int portnum);
+static int pl011_tstc (int portnum);
 
 
 int serial_init (void)
 {
-    unsigned int temp;
-    unsigned int divider;
-    unsigned int remainder;
-    unsigned int fraction;
-
-    /*
-    ** First, disable everything.
-    */
-    IO_WRITE(port[CONSOLE_PORT] + UART_PL011_CR, 0x0);
-
-    /*
-    ** Set baud rate
-    **
-    ** IBRD = UART_CLK / (16 * BAUD_RATE)
-    ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
-    */
+	unsigned int temp;
+	unsigned int divider;
+	unsigned int remainder;
+	unsigned int fraction;
+
+	/*
+	 ** First, disable everything.
+	 */
+	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0);
+
+	/*
+	 ** Set baud rate
+	 **
+	 ** IBRD = UART_CLK / (16 * BAUD_RATE)
+	 ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
+	 */
 #ifdef CONFIG_VERSATILE
-    temp      = 16 * baudRate;
-    divider   = 24000000 / temp;
-    remainder = 24000000 % temp;
-    temp      = (8 * remainder) / baudRate;
-    fraction  = (temp >> 1) + (temp & 1);
+	temp = 16 * baudRate;
+	divider = 24000000 / temp;
+	remainder = 24000000 % temp;
+	temp = (8 * remainder) / baudRate;
+	fraction = (temp >> 1) + (temp & 1);
 #endif
 #ifdef CONFIG_INTEGRATOR
-    temp      = 16 * baudRate;
-    divider   = 14745600 / temp;
-    remainder = 14745600 % temp;
-    temp      = (8 * remainder) / baudRate;
-    fraction  = (temp >> 1) + (temp & 1);
+	temp = 16 * baudRate;
+	divider = 14745600 / temp;
+	remainder = 14745600 % temp;
+	temp = (8 * remainder) / baudRate;
+	fraction = (temp >> 1) + (temp & 1);
 #endif
- 
-    IO_WRITE(port[CONSOLE_PORT] + UART_PL011_IBRD, divider);
-    IO_WRITE(port[CONSOLE_PORT] + UART_PL011_FBRD, fraction);
-
-    /*
-    ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
-    */
-    IO_WRITE(port[CONSOLE_PORT] + UART_PL011_LCRH,
-        (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN));
-
-    /*
-    ** Finally, enable the UART
-    */
-    IO_WRITE(port[CONSOLE_PORT] + UART_PL011_CR,
-        (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE));
-
-    return (0);
+
+	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider);
+	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction);
+
+	/*
+	 ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
+	 */
+	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH,
+		  (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN));
+
+	/*
+	 ** Finally, enable the UART
+	 */
+	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR,
+		  (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
+		   UART_PL011_CR_RXE));
+
+	return (0);
 }
 
-void
-serial_putc(const char c)
+void serial_putc (const char c)
 {
 	if (c == '\n')
-		pl011_putc(CONSOLE_PORT, '\r');
+		pl011_putc (CONSOLE_PORT, '\r');
 
-	pl011_putc(CONSOLE_PORT, c);
+	pl011_putc (CONSOLE_PORT, c);
 }
 
-void
-serial_puts (const char *s)
+void serial_puts (const char *s)
 {
 	while (*s) {
 		serial_putc (*s++);
 	}
 }
 
-int
-serial_getc(void)
+int serial_getc (void)
 {
-	return pl011_getc(CONSOLE_PORT);
+	return pl011_getc (CONSOLE_PORT);
 }
 
-int
-serial_tstc(void)
+int serial_tstc (void)
 {
-	return pl011_tstc(CONSOLE_PORT);
+	return pl011_tstc (CONSOLE_PORT);
 }
 
-void
-serial_setbrg (void)
+void serial_setbrg (void)
 {
 }
 
-static void pl011_putc(int portnum, char c)
+static void pl011_putc (int portnum, char c)
 {
-    /* Wait until there is space in the FIFO */
-    while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF);
-    
-    /* Send the character */
-    IO_WRITE(port[portnum] + UART_PL01x_DR, c);
+	/* Wait until there is space in the FIFO */
+	while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF);
+
+	/* Send the character */
+	IO_WRITE (port[portnum] + UART_PL01x_DR, c);
 }
 
-static int pl011_getc(int portnum)
+static int pl011_getc (int portnum)
 {
-    unsigned int data;
-
-    /* Wait until there is data in the FIFO */
-    while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
-    
-    data = IO_READ(port[portnum] + UART_PL01x_DR);
-    
-    /* Check for an error flag */
-    if (data & 0xFFFFFF00)
-    {
-        /* Clear the error */
-        IO_WRITE(port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
-        return -1;
-    }
-    
-    return (int)data;
+	unsigned int data;
+
+	/* Wait until there is data in the FIFO */
+	while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
+
+	data = IO_READ (port[portnum] + UART_PL01x_DR);
+
+	/* Check for an error flag */
+	if (data & 0xFFFFFF00) {
+		/* Clear the error */
+		IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
+		return -1;
+	}
+
+	return (int) data;
 }
 
-static int pl011_tstc(int portnum)
+static int pl011_tstc (int portnum)
 {
-    return !(IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
+	return !(IO_READ (port[portnum] + UART_PL01x_FR) &
+		 UART_PL01x_FR_RXFE);
 }
 
 #endif