summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
authorVikas Manocha <vikas.manocha@st.com>2014-11-21 10:34:21 -0800
committerTom Rini <trini@ti.com>2014-12-08 09:35:44 -0500
commitd2ca9fd2cd74e8346827af111ceb249a7fd44637 (patch)
tree0e88ea05d55d4082adf223821418af795fcbc970 /drivers/serial
parent2df810717e8737b9c4a7d2a93b0100fcd7eae84f (diff)
downloadu-boot-imx-d2ca9fd2cd74e8346827af111ceb249a7fd44637.zip
u-boot-imx-d2ca9fd2cd74e8346827af111ceb249a7fd44637.tar.gz
u-boot-imx-d2ca9fd2cd74e8346827af111ceb249a7fd44637.tar.bz2
serial: pl01x: move all line control at same place
Receive line control uses same setting as transmit line control, also one lcrh write is effective for both baud rate & receive line control internal update. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Acked-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/serial_pl01x.c44
1 files changed, 21 insertions, 23 deletions
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index a58ad8a..fb11210 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -72,8 +72,6 @@ static int pl01x_tstc(struct pl01x_regs *regs)
static int pl01x_generic_serial_init(struct pl01x_regs *regs,
enum pl01x_type type)
{
- unsigned int lcr;
-
#ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT
if (type == TYPE_PL011) {
/* Empty RX fifo if necessary */
@@ -87,15 +85,28 @@ static int pl01x_generic_serial_init(struct pl01x_regs *regs,
/* First, disable everything */
writel(0, &regs->pl010_cr);
- /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
- lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN;
- writel(lcr, &regs->pl011_lcrh);
-
switch (type) {
case TYPE_PL010:
break;
- case TYPE_PL011: {
+ case TYPE_PL011:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int set_line_control(struct pl01x_regs *regs)
+{
+ unsigned int lcr;
+ /*
+ * Internal update of baud rate register require line
+ * control register write
+ */
+ lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN;
#ifdef CONFIG_PL011_SERIAL_RLCR
+ {
int i;
/*
@@ -107,22 +118,15 @@ static int pl01x_generic_serial_init(struct pl01x_regs *regs,
writel(lcr, &regs->fr);
writel(lcr, &regs->pl011_rlcr);
- /* lcrh needs to be set again for change to be effective */
- writel(lcr, &regs->pl011_lcrh);
-#endif
- break;
- }
- default:
- return -EINVAL;
}
-
+#endif
+ writel(lcr, &regs->pl011_lcrh);
return 0;
}
static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type,
int clock, int baudrate)
{
- unsigned int lcr;
switch (type) {
case TYPE_PL010: {
unsigned int divisor;
@@ -176,13 +180,7 @@ static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type,
writel(divider, &regs->pl011_ibrd);
writel(fraction, &regs->pl011_fbrd);
- /*
- * Internal update of baud rate register require line
- * control register write
- */
- lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN;
- writel(lcr, &regs->pl011_lcrh);
-
+ set_line_control(regs);
/* Finally, enable the UART */
writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
UART_PL011_CR_RXE | UART_PL011_CR_RTS, &regs->pl011_cr);