summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2007-12-27 10:56:54 +0100
committerWolfgang Denk <wd@denx.de>2008-02-05 00:04:15 +0100
commit7ec8bb15ee368ea54d48d64867767a704d9ab4c2 (patch)
tree4e2df3fe3e56fca089d31ac9d3f4b17bd82115cd /drivers/serial
parent16158778b5f52f201e95ded2d2d9084b0ed5670d (diff)
downloadu-boot-imx-7ec8bb15ee368ea54d48d64867767a704d9ab4c2.zip
u-boot-imx-7ec8bb15ee368ea54d48d64867767a704d9ab4c2.tar.gz
u-boot-imx-7ec8bb15ee368ea54d48d64867767a704d9ab4c2.tar.bz2
OMAP5912: fix FIFO handling in UART driver
According to the OMAP5912 Serial Interfaces Reference Guide (see http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the FIFO_EN enable bit in the FIFO Control Register (FCR) can only be changed when the baud clock is not running, i. e. when both DLL and DLH are set to 0. Thus make sure that DLL and DLH are 0 when writing the FCR. Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/ns16550.c16
1 files changed, 12 insertions, 4 deletions
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 2429464..6b3f60e 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -21,11 +21,15 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
#endif
com_port->lcr = LCR_BKSE | LCRVAL;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
+ com_port->dll = 0;
+ com_port->dlm = 0;
com_port->lcr = LCRVAL;
com_port->mcr = MCRVAL;
com_port->fcr = FCRVAL;
+ com_port->lcr = LCR_BKSE | LCRVAL;
+ com_port->dll = baud_divisor & 0xff;
+ com_port->dlm = (baud_divisor >> 8) & 0xff;
+ com_port->lcr = LCRVAL;
#if defined(CONFIG_OMAP)
#if defined(CONFIG_APTIX)
com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */
@@ -38,12 +42,16 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
void NS16550_reinit (NS16550_t com_port, int baud_divisor)
{
com_port->ier = 0x00;
+ com_port->lcr = LCR_BKSE | LCRVAL;
+ com_port->dll = 0;
+ com_port->dlm = 0;
+ com_port->lcr = LCRVAL;
+ com_port->mcr = MCRVAL;
+ com_port->fcr = FCRVAL;
com_port->lcr = LCR_BKSE;
com_port->dll = baud_divisor & 0xff;
com_port->dlm = (baud_divisor >> 8) & 0xff;
com_port->lcr = LCRVAL;
- com_port->mcr = MCRVAL;
- com_port->fcr = FCRVAL;
}
void NS16550_putc (NS16550_t com_port, char c)