summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2012-11-29 02:53:29 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2013-02-28 14:49:24 +0100
commit4cfc611b4a4ce009cfad46804bec2a1caad8e329 (patch)
tree64fa8d69dbc94806d062167f64673f31e97e0a26 /drivers/serial
parent11da5d821324991f1e6a79bde1a0908ffb9bcf36 (diff)
downloadu-boot-imx-4cfc611b4a4ce009cfad46804bec2a1caad8e329.zip
u-boot-imx-4cfc611b4a4ce009cfad46804bec2a1caad8e329.tar.gz
u-boot-imx-4cfc611b4a4ce009cfad46804bec2a1caad8e329.tar.bz2
ARM: ns9750dev: remove remainders of dead board
Commit 8b710b1 started removing code for the unmaintained "ns9750dev" board; the board support is still broken, and not included anywhere in the Makefile or boards.cfg. Remove the remaining dead code. Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/ns9750_serial.c218
-rw-r--r--drivers/serial/serial.c2
3 files changed, 0 insertions, 221 deletions
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5e8b648..de3f471 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -33,7 +33,6 @@ COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o
COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
COBJS-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o
COBJS-$(CONFIG_MCFUART) += mcfuart.o
-COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
diff --git a/drivers/serial/ns9750_serial.c b/drivers/serial/ns9750_serial.c
deleted file mode 100644
index 85fc68a..0000000
--- a/drivers/serial/ns9750_serial.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_serial.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Serial driver for the NS9750. Only one UART is supported yet.
- * @References: [1] NS9750 Hardware Reference/December 2003
- * @TODO: Implement Character GAP Timer when chip is fixed for PLL bypass
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#include <common.h>
-
-#include "ns9750_bbus.h" /* for GPIOs */
-#include "ns9750_ser.h" /* for serial configuration */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_CONS_INDEX)
-#error "No console index specified."
-#endif
-
-#define CONSOLE CONFIG_CONS_INDEX
-
-static unsigned int calcBitrateRegister( void );
-static unsigned int calcRxCharGapRegister( void );
-
-static char cCharsAvailable; /* Numbers of chars in unCharCache */
-static unsigned int unCharCache; /* unCharCache is only valid if
- * cCharsAvailable > 0 */
-
-/***********************************************************************
- * @Function: serial_init
- * @Return: 0
- * @Descr: configures GPIOs and UART. Requires BBUS Master Reset turned off
- ***********************************************************************/
-
-static int ns9750_serial_init(void)
-{
- unsigned int aunGPIOTxD[] = { 0, 8, 40, 44 };
- unsigned int aunGPIORxD[] = { 1, 9, 41, 45 };
-
- cCharsAvailable = 0;
-
- /* configure TxD and RxD pins for their special function */
- set_gpio_cfg_reg_val( aunGPIOTxD[ CONSOLE ],
- NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_OUTPUT );
- set_gpio_cfg_reg_val( aunGPIORxD[ CONSOLE ],
- NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_INPUT );
-
- /* configure serial engine */
- *get_ser_reg_addr_channel( NS9750_SER_CTRL_A, CONSOLE ) =
- NS9750_SER_CTRL_A_CE |
- NS9750_SER_CTRL_A_STOP |
- NS9750_SER_CTRL_A_WLS_8;
-
- serial_setbrg();
-
- *get_ser_reg_addr_channel( NS9750_SER_CTRL_B, CONSOLE ) =
- NS9750_SER_CTRL_B_RCGT;
-
- return 0;
-}
-
-/***********************************************************************
- * @Function: serial_putc
- * @Return: n/a
- * @Descr: writes one character to the FIFO. Blocks until FIFO is not full
- ***********************************************************************/
-
-static void ns9750_serial_putc(const char c)
-{
- if (c == '\n')
- serial_putc( '\r' );
-
- while (!(*get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE) &
- NS9750_SER_STAT_A_TRDY ) ) {
- /* do nothing, wait for characters in FIFO sent */
- }
-
- *(volatile char*) get_ser_reg_addr_channel( NS9750_SER_FIFO,
- CONSOLE) = c;
-}
-
-/***********************************************************************
- * @Function: serial_getc
- * @Return: the character read
- * @Descr: performs only 8bit accesses to the FIFO. No error handling
- ***********************************************************************/
-
-static int ns9750_serial_getc(void)
-{
- int i;
-
- while (!serial_tstc() ) {
- /* do nothing, wait for incoming characters */
- }
-
- /* at least one character in unCharCache */
- i = (int) (unCharCache & 0xff);
-
- unCharCache >>= 8;
- cCharsAvailable--;
-
- return i;
-}
-
-/***********************************************************************
- * @Function: serial_tstc
- * @Return: 0 if no input available, otherwise != 0
- * @Descr: checks for incoming FIFO not empty. Stores the incoming chars in
- * unCharCache and the numbers of characters in cCharsAvailable
- ***********************************************************************/
-
-static int ns9750_serial_tstc(void)
-{
- unsigned int unRegCache;
-
- if ( cCharsAvailable )
- return 1;
-
- unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,CONSOLE );
- if( unRegCache & NS9750_SER_STAT_A_RBC ) {
- *get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE ) =
- NS9750_SER_STAT_A_RBC;
- unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,
- CONSOLE );
- }
-
- if ( unRegCache & NS9750_SER_STAT_A_RRDY ) {
- cCharsAvailable = (unRegCache & NS9750_SER_STAT_A_RXFDB_MA)>>20;
- if ( !cCharsAvailable )
- cCharsAvailable = 4;
-
- unCharCache = *get_ser_reg_addr_channel( NS9750_SER_FIFO,
- CONSOLE );
- return 1;
- }
-
- /* no chars available */
- return 0;
-}
-
-static void ns9750_serial_setbrg(void)
-{
- *get_ser_reg_addr_channel( NS9750_SER_BITRATE, CONSOLE ) =
- calcBitrateRegister();
- *get_ser_reg_addr_channel( NS9750_SER_RX_CHAR_TIMER, CONSOLE ) =
- calcRxCharGapRegister();
-}
-
-/***********************************************************************
- * @Function: calcBitrateRegister
- * @Return: value for the serial bitrate register
- * @Descr: register value depends on clock frequency and baudrate
- ***********************************************************************/
-
-static unsigned int calcBitrateRegister( void )
-{
- return ( NS9750_SER_BITRATE_EBIT |
- NS9750_SER_BITRATE_CLKMUX_BCLK |
- NS9750_SER_BITRATE_TMODE |
- NS9750_SER_BITRATE_TCDR_16 |
- NS9750_SER_BITRATE_RCDR_16 |
- ( ( ( ( CONFIG_SYS_CLK_FREQ / 8 ) / /* BBUS clock,[1] Fig. 38 */
- ( gd->baudrate * 16 ) ) - 1 ) &
- NS9750_SER_BITRATE_N_MA ) );
-}
-
-/***********************************************************************
- * @Function: calcRxCharGapRegister
- * @Return: value for the character gap timer register
- * @Descr: register value depends on clock frequency and baudrate. Currently 0
- * is used as there is a bug with the gap timer in PLL bypass mode.
- ***********************************************************************/
-
-static unsigned int calcRxCharGapRegister( void )
-{
- return NS9750_SER_RX_CHAR_TIMER_TRUN;
-}
-
-static struct serial_device ns9750_serial_drv = {
- .name = "ns9750_serial",
- .start = ns9750_serial_init,
- .stop = NULL,
- .setbrg = ns9750_serial_setbrg,
- .putc = ns9750_serial_putc,
- .puts = default_serial_puts,
- .getc = ns9750_serial_getc,
- .tstc = ns9750_serial_tstc,
-};
-
-void ns9750_serial_initialize(void)
-{
- serial_register(&ns9750_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &ns9750_serial_drv;
-}
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 1f8955a..7922bf0 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -164,7 +164,6 @@ serial_initfunc(altera_serial_initialize);
serial_initfunc(atmel_serial_initialize);
serial_initfunc(lpc32xx_serial_initialize);
serial_initfunc(mcf_serial_initialize);
-serial_initfunc(ns9750_serial_initialize);
serial_initfunc(oc_serial_initialize);
serial_initfunc(s3c64xx_serial_initialize);
serial_initfunc(sandbox_serial_initialize);
@@ -259,7 +258,6 @@ void serial_initialize(void)
atmel_serial_initialize();
lpc32xx_serial_initialize();
mcf_serial_initialize();
- ns9750_serial_initialize();
oc_serial_initialize();
s3c64xx_serial_initialize();
sandbox_serial_initialize();