ixp: move serial to drivers/serial

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 126 insertions, 0 deletions

diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index c7a1882..b6fd0d7 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -32,6 +32,7 @@ COBJS-y += ns16550.o
 COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
 COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
 COBJS-y += serial.o
+COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o
 COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
 COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
 COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
diff --git a/drivers/serial/serial_ixp.c b/drivers/serial/serial_ixp.c
new file mode 100644
index 0000000..dd26af4
--- /dev/null
+++ b/drivers/serial/serial_ixp.c
@@ -0,0 +1,125 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/ixp425.h>
+
+/*
+ *               14.7456 MHz
+ * Baud Rate = --------------
+ *              16 x Divisor
+ */
+#define SERIAL_CLOCK 921600
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void serial_setbrg (void)
+{
+	unsigned int quot = 0;
+	int uart = CONFIG_SYS_IXP425_CONSOLE;
+
+	if ((gd->baudrate <= SERIAL_CLOCK) && (SERIAL_CLOCK % gd->baudrate == 0))
+		quot = SERIAL_CLOCK / gd->baudrate;
+	else
+		hang ();
+
+	IER(uart) = 0;					/* Disable for now */
+	FCR(uart) = 0;					/* No fifos enabled */
+
+	/* set baud rate */
+	LCR(uart) = LCR_WLS0 | LCR_WLS1 | LCR_DLAB;
+	DLL(uart) = quot & 0xff;
+	DLH(uart) = quot >> 8;
+	LCR(uart) = LCR_WLS0 | LCR_WLS1;
+#ifdef CONFIG_SERIAL_RTS_ACTIVE
+	MCR(uart) = MCR_RTS;				/* set RTS active */
+#else
+	MCR(uart) = 0;					/* set RTS inactive */
+#endif
+	IER(uart) = IER_UUE;
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+	serial_setbrg ();
+
+	return (0);
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+	/* wait for room in the tx FIFO on UART */
+	while ((LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_TEMT) == 0);
+
+	THR(CONFIG_SYS_IXP425_CONSOLE) = c;
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc ('\r');
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_tstc (void)
+{
+	return LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+	while (!(LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR));
+
+	return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff;
+}
+
+void
+serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}