dm: sh: serial: Add support driver model

This adds driver model support with this driver. This was tested by Koelsch
board and Gose board.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Acked-by: Simon Glass <sjg@chromium.org>

1 files changed, 219 insertions, 102 deletions

diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 7c1f271..3641c9f 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -1,78 +1,21 @@
 /*
  * SuperH SCIF device driver.
  * Copyright (C) 2013  Renesas Electronics Corporation
- * Copyright (C) 2007,2008,2010 Nobuhiro Iwamatsu
+ * Copyright (C) 2007,2008,2010, 2014 Nobuhiro Iwamatsu
  * Copyright (C) 2002 - 2008  Paul Mundt
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
+#include <errno.h>
+#include <dm.h>
 #include <asm/io.h>
 #include <asm/processor.h>
-#include "serial_sh.h"
 #include <serial.h>
 #include <linux/compiler.h>
-
-#if defined(CONFIG_CONS_SCIF0)
-# define SCIF_BASE	SCIF0_BASE
-#elif defined(CONFIG_CONS_SCIF1)
-# define SCIF_BASE	SCIF1_BASE
-#elif defined(CONFIG_CONS_SCIF2)
-# define SCIF_BASE	SCIF2_BASE
-#elif defined(CONFIG_CONS_SCIF3)
-# define SCIF_BASE	SCIF3_BASE
-#elif defined(CONFIG_CONS_SCIF4)
-# define SCIF_BASE	SCIF4_BASE
-#elif defined(CONFIG_CONS_SCIF5)
-# define SCIF_BASE	SCIF5_BASE
-#elif defined(CONFIG_CONS_SCIF6)
-# define SCIF_BASE	SCIF6_BASE
-#elif defined(CONFIG_CONS_SCIF7)
-# define SCIF_BASE	SCIF7_BASE
-#else
-# error "Default SCIF doesn't set....."
-#endif
-
-#if defined(CONFIG_SCIF_A)
-	#define SCIF_BASE_PORT	PORT_SCIFA
-#else
-	#define SCIF_BASE_PORT	PORT_SCIF
-#endif
-
-static struct uart_port sh_sci = {
-	.membase	= (unsigned char*)SCIF_BASE,
-	.mapbase	= SCIF_BASE,
-	.type		= SCIF_BASE_PORT,
-};
-
-static void sh_serial_setbrg(void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SCIF_USE_EXT_CLK
-	unsigned short dl = DL_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ);
-	sci_out(&sh_sci, DL, dl);
-	/* Need wait: Clock * 1/dl × 1/16 */
-	udelay((1000000 * dl * 16 / CONFIG_SYS_CLK_FREQ) * 1000 + 1);
-#else
-	sci_out(&sh_sci, SCBRR,
-		SCBRR_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ));
-#endif
-}
-
-static int sh_serial_init(void)
-{
-	sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
-	sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
-	sci_out(&sh_sci, SCSMR, 0);
-	sci_out(&sh_sci, SCSMR, 0);
-	sci_out(&sh_sci, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
-	sci_in(&sh_sci, SCFCR);
-	sci_out(&sh_sci, SCFCR, 0);
-
-	serial_setbrg();
-	return 0;
-}
+#include <dm/platform_data/serial_sh.h>
+#include "serial_sh.h"
 
 #if defined(CONFIG_CPU_SH7760) || \
 	defined(CONFIG_CPU_SH7780) || \
@@ -86,7 +29,7 @@ static int scif_rxfill(struct uart_port *port)
 static int scif_rxfill(struct uart_port *port)
 {
 	if ((port->mapbase == 0xffe00000) ||
-		(port->mapbase == 0xffe08000)) {
+	    (port->mapbase == 0xffe08000)) {
 		/* SCIF0/1*/
 		return sci_in(port, SCRFDR) & 0xff;
 	} else {
@@ -109,80 +52,253 @@ static int scif_rxfill(struct uart_port *port)
 }
 #endif
 
-static int serial_rx_fifo_level(void)
+static void sh_serial_init_generic(struct uart_port *port)
 {
-	return scif_rxfill(&sh_sci);
+	sci_out(port, SCSCR , SCSCR_INIT(port));
+	sci_out(port, SCSCR , SCSCR_INIT(port));
+	sci_out(port, SCSMR, 0);
+	sci_out(port, SCSMR, 0);
+	sci_out(port, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
+	sci_in(port, SCFCR);
+	sci_out(port, SCFCR, 0);
 }
 
-static void handle_error(void)
+static void
+sh_serial_setbrg_generic(struct uart_port *port, int clk, int baudrate)
 {
-	sci_in(&sh_sci, SCxSR);
-	sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci));
-	sci_in(&sh_sci, SCLSR);
-	sci_out(&sh_sci, SCLSR, 0x00);
+	if (port->clk_mode == EXT_CLK) {
+		unsigned short dl = DL_VALUE(baudrate, clk);
+		sci_out(port, DL, dl);
+		/* Need wait: Clock * 1/dl × 1/16 */
+		udelay((1000000 * dl * 16 / clk) * 1000 + 1);
+	} else {
+		sci_out(port, SCBRR, SCBRR_VALUE(baudrate, clk));
+	}
 }
 
-static void serial_raw_putc(const char c)
+static void handle_error(struct uart_port *port)
 {
-	while (1) {
-		/* Tx fifo is empty */
-		if (sci_in(&sh_sci, SCxSR) & SCxSR_TEND(&sh_sci))
-			break;
-	}
+	sci_in(port, SCxSR);
+	sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+	sci_in(port, SCLSR);
+	sci_out(port, SCLSR, 0x00);
+}
+
+static int serial_raw_putc(struct uart_port *port, const char c)
+{
+	/* Tx fifo is empty */
+	if (!(sci_in(port, SCxSR) & SCxSR_TEND(port)))
+		return -EAGAIN;
 
-	sci_out(&sh_sci, SCxTDR, c);
-	sci_out(&sh_sci, SCxSR, sci_in(&sh_sci, SCxSR) & ~SCxSR_TEND(&sh_sci));
+	sci_out(port, SCxTDR, c);
+	sci_out(port, SCxSR, sci_in(port, SCxSR) & ~SCxSR_TEND(port));
+
+	return 0;
 }
 
-static void sh_serial_putc(const char c)
+static int serial_rx_fifo_level(struct uart_port *port)
 {
-	if (c == '\n')
-		serial_raw_putc('\r');
-	serial_raw_putc(c);
+	return scif_rxfill(port);
 }
 
-static int sh_serial_tstc(void)
+static int sh_serial_tstc_generic(struct uart_port *port)
 {
-	if (sci_in(&sh_sci, SCxSR) & SCIF_ERRORS) {
-		handle_error();
+	if (sci_in(port, SCxSR) & SCIF_ERRORS) {
+		handle_error(port);
 		return 0;
 	}
 
-	return serial_rx_fifo_level() ? 1 : 0;
+	return serial_rx_fifo_level(port) ? 1 : 0;
 }
 
-
-static int serial_getc_check(void)
+static int serial_getc_check(struct uart_port *port)
 {
 	unsigned short status;
 
-	status = sci_in(&sh_sci, SCxSR);
+	status = sci_in(port, SCxSR);
 
 	if (status & SCIF_ERRORS)
-		handle_error();
-	if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
-		handle_error();
-	return status & (SCIF_DR | SCxSR_RDxF(&sh_sci));
+		handle_error(port);
+	if (sci_in(port, SCLSR) & SCxSR_ORER(port))
+		handle_error(port);
+	return status & (SCIF_DR | SCxSR_RDxF(port));
 }
 
-static int sh_serial_getc(void)
+static int sh_serial_getc_generic(struct uart_port *port)
 {
 	unsigned short status;
 	char ch;
 
-	while (!serial_getc_check())
-		;
+	if (!serial_getc_check(port))
+		return -EAGAIN;
 
-	ch = sci_in(&sh_sci, SCxRDR);
-	status = sci_in(&sh_sci, SCxSR);
+	ch = sci_in(port, SCxRDR);
+	status = sci_in(port, SCxSR);
 
-	sci_out(&sh_sci, SCxSR, SCxSR_RDxF_CLEAR(&sh_sci));
+	sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
 
 	if (status & SCIF_ERRORS)
-			handle_error();
+		handle_error(port);
+
+	if (sci_in(port, SCLSR) & SCxSR_ORER(port))
+		handle_error(port);
+
+	return ch;
+}
+
+#ifdef CONFIG_DM_SERIAL
+
+static int sh_serial_pending(struct udevice *dev, bool input)
+{
+	struct uart_port *priv = dev_get_priv(dev);
+
+	return sh_serial_tstc_generic(priv);
+}
+
+static int sh_serial_putc(struct udevice *dev, const char ch)
+{
+	struct uart_port *priv = dev_get_priv(dev);
+
+	return serial_raw_putc(priv, ch);
+}
+
+static int sh_serial_getc(struct udevice *dev)
+{
+	struct uart_port *priv = dev_get_priv(dev);
+
+	return sh_serial_getc_generic(priv);
+}
+
+static int sh_serial_setbrg(struct udevice *dev, int baudrate)
+{
+	struct sh_serial_platdata *plat = dev_get_platdata(dev);
+	struct uart_port *priv = dev_get_priv(dev);
+
+	sh_serial_setbrg_generic(priv, plat->clk, baudrate);
+
+	return 0;
+}
+
+static int sh_serial_probe(struct udevice *dev)
+{
+	struct sh_serial_platdata *plat = dev_get_platdata(dev);
+	struct uart_port *priv = dev_get_priv(dev);
+
+	priv->membase	= (unsigned char *)plat->base;
+	priv->mapbase	= plat->base;
+	priv->type	= plat->type;
+	priv->clk_mode	= plat->clk_mode;
+
+	sh_serial_init_generic(priv);
+
+	return 0;
+}
+
+static const struct dm_serial_ops sh_serial_ops = {
+	.putc = sh_serial_putc,
+	.pending = sh_serial_pending,
+	.getc = sh_serial_getc,
+	.setbrg = sh_serial_setbrg,
+};
+
+U_BOOT_DRIVER(serial_sh) = {
+	.name	= "serial_sh",
+	.id	= UCLASS_SERIAL,
+	.probe	= sh_serial_probe,
+	.ops	= &sh_serial_ops,
+	.flags	= DM_FLAG_PRE_RELOC,
+	.priv_auto_alloc_size = sizeof(struct uart_port),
+};
+
+#else /* CONFIG_DM_SERIAL */
+
+#if defined(CONFIG_CONS_SCIF0)
+# define SCIF_BASE	SCIF0_BASE
+#elif defined(CONFIG_CONS_SCIF1)
+# define SCIF_BASE	SCIF1_BASE
+#elif defined(CONFIG_CONS_SCIF2)
+# define SCIF_BASE	SCIF2_BASE
+#elif defined(CONFIG_CONS_SCIF3)
+# define SCIF_BASE	SCIF3_BASE
+#elif defined(CONFIG_CONS_SCIF4)
+# define SCIF_BASE	SCIF4_BASE
+#elif defined(CONFIG_CONS_SCIF5)
+# define SCIF_BASE	SCIF5_BASE
+#elif defined(CONFIG_CONS_SCIF6)
+# define SCIF_BASE	SCIF6_BASE
+#elif defined(CONFIG_CONS_SCIF7)
+# define SCIF_BASE	SCIF7_BASE
+#else
+# error "Default SCIF doesn't set....."
+#endif
+
+#if defined(CONFIG_SCIF_A)
+	#define SCIF_BASE_PORT	PORT_SCIFA
+#else
+	#define SCIF_BASE_PORT	PORT_SCIF
+#endif
+
+static struct uart_port sh_sci = {
+	.membase	= (unsigned char *)SCIF_BASE,
+	.mapbase	= SCIF_BASE,
+	.type		= SCIF_BASE_PORT,
+#ifdef CONFIG_SCIF_USE_EXT_CLK
+	.clk_mode =	EXT_CLK,
+#endif
+};
+
+static void sh_serial_setbrg(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	struct uart_port *port = &sh_sci;
+
+	sh_serial_setbrg_generic(port, CONFIG_SH_SCIF_CLK_FREQ, gd->baudrate);
+}
+
+static int sh_serial_init(void)
+{
+	struct uart_port *port = &sh_sci;
+
+	sh_serial_init_generic(port);
+	serial_setbrg();
+
+	return 0;
+}
+
+static void sh_serial_putc(const char c)
+{
+	struct uart_port *port = &sh_sci;
+
+	if (c == '\n') {
+		while (1) {
+			if  (serial_raw_putc(port, '\r') != -EAGAIN)
+				break;
+		}
+	}
+	while (1) {
+		if  (serial_raw_putc(port, c) != -EAGAIN)
+			break;
+	}
+}
+
+static int sh_serial_tstc(void)
+{
+	struct uart_port *port = &sh_sci;
+
+	return sh_serial_tstc_generic(port);
+}
+
+static int sh_serial_getc(void)
+{
+	struct uart_port *port = &sh_sci;
+	int ch;
+
+	while (1) {
+		ch = sh_serial_getc_generic(port);
+		if (ch != -EAGAIN)
+			break;
+	}
 
-	if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
-		handle_error();
 	return ch;
 }
 
@@ -206,3 +322,4 @@ __weak struct serial_device *default_serial_console(void)
 {
 	return &sh_serial_drv;
 }
+#endif /* CONFIG_DM_SERIAL */