diff options
| author | Tom Rix <Tom.Rix@windriver.com> | 2009-05-31 12:44:37 +0200 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2009-06-12 20:39:53 +0200 |
| commit | 660888b7fb8840ce169dcd2589e49ab44c46b87b (patch) | |
| tree | 150f29155c8460803bb60cf4b070bbbadbb4c604 /drivers/serial/ns16550.c | |
| parent | 3ea201b016ab259a5ac8824af767569522768c47 (diff) | |
| download | u-boot-imx-660888b7fb8840ce169dcd2589e49ab44c46b87b.zip u-boot-imx-660888b7fb8840ce169dcd2589e49ab44c46b87b.tar.gz u-boot-imx-660888b7fb8840ce169dcd2589e49ab44c46b87b.tar.bz2 | |
ZOOM2 Add serial support.
Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board.
The default serial is from the USB connector on left side of the debug board.
The USB connector will produce 2 of the 4 UARTS. On your host pick the first
enumeration.
The details of the setting of the serial gpmc setup are not available.
The values were provided by another party.
The serial port set up is the same with Zoom1.
Baud rate 115200, 8 bit data, no parity, 1 stop bit, no flow.
The kernel bootargs are
console=ttyS3,115200n8
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Diffstat (limited to 'drivers/serial/ns16550.c')
| -rw-r--r-- | drivers/serial/ns16550.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 657c9da..2fcc8c3 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -17,7 +17,7 @@ void NS16550_init (NS16550_t com_port, int baud_divisor) { com_port->ier = 0x00; -#ifdef CONFIG_OMAP +#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2) com_port->mdr1 = 0x7; /* mode select reset TL16C750*/ #endif com_port->lcr = UART_LCR_BKSE | UART_LCRVAL; @@ -30,7 +30,7 @@ void NS16550_init (NS16550_t com_port, int baud_divisor) com_port->dll = baud_divisor & 0xff; com_port->dlm = (baud_divisor >> 8) & 0xff; com_port->lcr = UART_LCRVAL; -#if defined(CONFIG_OMAP) +#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2) #if defined(CONFIG_APTIX) com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */ #else |