fsl: Change fsl_phy_enet_if to phy_interface_t

The fsl_phy_enet_if enum was, essentially, the phy_interface_t enum.
This meant that drivers which used fsl_phy_enet_if to deal with
PHY interfaces would have to convert between the two (or we would have
to have them mirror each other, and deal with the ensuing maintenance
headache). Instead, we switch all clients of fsl_phy_enet_if over to
phy_interface_t, which should become the standard, anyway.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Detlev Zundel <dzu@denx.de>

1 files changed, 18 insertions, 18 deletions

diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index c83ca4b..e26218b 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -25,6 +25,7 @@
 #include "uec.h"
 #include "uec_phy.h"
 #include "miiphy.h"
+#include <phy.h>
 
 #define ugphy_printk(format, arg...)  \
 	printf(format "\n", ## arg)
@@ -456,8 +457,9 @@ static int bcm_init(struct uec_mii_info *mii_info)
 
 	gbit_config_aneg(mii_info);
 
-	if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
-	   (uec->uec_info->speed == 1000)) {
+	if ((uec->uec_info->enet_interface_type ==
+				PHY_INTERFACE_MODE_RGMII_RXID) &&
+			(uec->uec_info->speed == SPEED_1000)) {
 		u16 val;
 		int cnt = 50;
 
@@ -485,22 +487,22 @@ static int uec_marvell_init(struct uec_mii_info *mii_info)
 {
 	struct eth_device *edev = mii_info->dev;
 	uec_private_t *uec = edev->priv;
-	enum fsl_phy_enet_if iface = uec->uec_info->enet_interface_type;
+	phy_interface_t iface = uec->uec_info->enet_interface_type;
 	int	speed = uec->uec_info->speed;
 
-	if ((speed == 1000) &&
-	   (iface == RGMII_ID ||
-	    iface == RGMII_RXID ||
-	    iface == RGMII_TXID)) {
+	if ((speed == SPEED_1000) &&
+	   (iface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    iface == PHY_INTERFACE_MODE_RGMII_RXID ||
+	    iface == PHY_INTERFACE_MODE_RGMII_TXID)) {
 		int temp;
 
 		temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
-		if (iface == RGMII_ID) {
+		if (iface == PHY_INTERFACE_MODE_RGMII_ID) {
 			temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
-		} else if (iface == RGMII_RXID) {
+		} else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) {
 			temp &= ~MII_M1111_TX_DELAY;
 			temp |= MII_M1111_RX_DELAY;
-		} else if (iface == RGMII_TXID) {
+		} else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) {
 			temp &= ~MII_M1111_RX_DELAY;
 			temp |= MII_M1111_TX_DELAY;
 		}
@@ -853,10 +855,8 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
 	return theInfo;
 }
 
-void marvell_phy_interface_mode (struct eth_device *dev,
-				 enum fsl_phy_enet_if type,
-				 int speed
-				)
+void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
+		int speed)
 {
 	uec_private_t *uec = (uec_private_t *) dev->priv;
 	struct uec_mii_info *mii_info;
@@ -868,8 +868,8 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 	}
 	mii_info = uec->mii_info;
 
-	if (type == RGMII) {
-		if (speed == 100) {
+	if (type == PHY_INTERFACE_MODE_RGMII) {
+		if (speed == SPEED_100) {
 			uec_phy_write(mii_info, 0x00, 0x9140);
 			uec_phy_write(mii_info, 0x1d, 0x001f);
 			uec_phy_write(mii_info, 0x1e, 0x200c);
@@ -890,7 +890,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 			uec_phy_write(mii_info, 0x00, 0xa100);
 			uec_phy_write(mii_info, 0x00, 0x2100);
 			udelay (1000000);
-		} else if (speed == 10) {
+		} else if (speed == SPEED_10) {
 			uec_phy_write(mii_info, 0x14, 0x8e40);
 			uec_phy_write(mii_info, 0x1b, 0x800b);
 			uec_phy_write(mii_info, 0x14, 0x0c82);
@@ -908,7 +908,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 }
 
 void change_phy_interface_mode (struct eth_device *dev,
-				enum fsl_phy_enet_if type, int speed)
+				phy_interface_t type, int speed)
 {
 #ifdef CONFIG_PHY_MODE_NEED_CHANGE
 	marvell_phy_interface_mode (dev, type, speed);