diff options
| author | Jelle van der Waa <jelle@vdwaa.nl> | 2016-02-23 18:47:19 +0100 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2016-02-23 20:50:07 +0100 |
| commit | 0d8382ae70e7559eba873b4d8b2cf9a15aeccf20 (patch) | |
| tree | 1197454051f70f8bb0de9c1b105b0f408ed43e8b /drivers/power | |
| parent | 595af9db2422fa5ae734cfe615415b17a5098f34 (diff) | |
| download | u-boot-imx-0d8382ae70e7559eba873b4d8b2cf9a15aeccf20.zip u-boot-imx-0d8382ae70e7559eba873b4d8b2cf9a15aeccf20.tar.gz u-boot-imx-0d8382ae70e7559eba873b4d8b2cf9a15aeccf20.tar.bz2 | |
sunxi: power: add support for sy8106a driver
SY8106A is a PMIC which is used on the Allwinner
H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is
implemented to set the default V-CPU voltage to 1200 mV.
This driver is required to ensure the SY8106A V-CPU
voltage is set to 1200 mV after a software reset. On cold
boot the default SY8106A output voltage is selected to be
1200 mV by a pair of resistors on the Orange Pi PC and Plus.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/power/Makefile | 1 | ||||
| -rw-r--r-- | drivers/power/sy8106a.c | 29 |
3 files changed, 46 insertions, 0 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 10683a2..adc6455 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -48,6 +48,13 @@ config AXP818_POWER Say y here to enable support for the axp818 pmic found on A83T dev board. +config SY8106A_POWER + boolean "SY8106A pmic support" + depends on MACH_SUN8I_H3 + ---help--- + Select this to enable support for the SY8106A pmic found on some + H3 boards. + endchoice config AXP_DCDC1_VOLT @@ -232,4 +239,13 @@ config AXP_ELDO3_VOLT 1.2V for the SSD2828 chip (converter of parallel LCD interface into MIPI DSI). +config SY8106A_VOUT1_VOLT + int "SY8106A pmic VOUT1 voltage" + depends on SY8106A_POWER + default 1200 + ---help--- + Set the voltage (mV) to program the SY8106A pmic VOUT1. This + is typically used to power the VDD-CPU and should be 1200mV. + Values can range from 680mV till 1950mV. + endmenu diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 0fdbca3..690faa0 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_AXP221_POWER) += axp221.o obj-$(CONFIG_AXP818_POWER) += axp818.o obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o +obj-$(CONFIG_SY8106A_POWER) += sy8106a.o obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o obj-$(CONFIG_TWL4030_POWER) += twl4030.o obj-$(CONFIG_TWL6030_POWER) += twl6030.o diff --git a/drivers/power/sy8106a.c b/drivers/power/sy8106a.c new file mode 100644 index 0000000..bbf116f --- /dev/null +++ b/drivers/power/sy8106a.c @@ -0,0 +1,29 @@ +/* + * (C) Copyright 2016 + * Jelle van der Waa <jelle@vdwaa.nl> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <i2c.h> +#include <sy8106a.h> + +#define SY8106A_I2C_ADDR 0x65 +#define SY8106A_VOUT1_SEL 1 +#define SY8106A_VOUT1_SEL_ENABLE (1 << 7) + +static u8 sy8106a_mvolt_to_cfg(int mvolt, int min, int max, int div) +{ + if (mvolt < min) + mvolt = min; + else if (mvolt > max) + mvolt = max; + + return (mvolt - min) / div; +} + +int sy8106a_set_vout1(unsigned int mvolt) +{ + u8 data = sy8106a_mvolt_to_cfg(mvolt, 680, 1950, 10) | SY8106A_VOUT1_SEL_ENABLE; + return i2c_write(SY8106A_I2C_ADDR, SY8106A_VOUT1_SEL, 1, &data, 1); +} |