Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

2 files changed, 607 insertions, 0 deletions

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index f0dfb59..e73a498 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_PCI) += pci.o pci_auto.o
 obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o
 obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o
 obj-$(CONFIG_PCI_MSC01) += pci_msc01.o
+obj-$(CONFIG_PCIE_IMX) += pcie_imx.o
 obj-$(CONFIG_FTPCI100) += pci_ftpci100.o
 obj-$(CONFIG_SH4_PCI) += pci_sh4.o
 obj-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c
new file mode 100644
index 0000000..34377e9
--- /dev/null
+++ b/drivers/pci/pcie_imx.c
@@ -0,0 +1,606 @@
+/*
+ * Freescale i.MX6 PCI Express Root-Complex driver
+ *
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * Based on upstream Linux kernel driver:
+ * pci-imx6.c:		Sean Cross <xobs@kosagi.com>
+ * pcie-designware.c:	Jingoo Han <jg1.han@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+#include <errno.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+#define MX6_DBI_ADDR	0x01ffc000
+#define MX6_DBI_SIZE	0x4000
+#define MX6_IO_ADDR	0x01000000
+#define MX6_IO_SIZE	0x100000
+#define MX6_MEM_ADDR	0x01100000
+#define MX6_MEM_SIZE	0xe00000
+#define MX6_ROOT_ADDR	0x01f00000
+#define MX6_ROOT_SIZE	0xfc000
+
+/* PCIe Port Logic registers (memory-mapped) */
+#define PL_OFFSET 0x700
+#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
+#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
+#define PCIE_PHY_DEBUG_R1_LINK_UP		(1 << 4)
+#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING	(1 << 29)
+
+#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
+#define PCIE_PHY_CTRL_DATA_LOC 0
+#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
+#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
+#define PCIE_PHY_CTRL_WR_LOC 18
+#define PCIE_PHY_CTRL_RD_LOC 19
+
+#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
+#define PCIE_PHY_STAT_DATA_LOC 0
+#define PCIE_PHY_STAT_ACK_LOC 16
+
+/* PHY registers (not memory-mapped) */
+#define PCIE_PHY_RX_ASIC_OUT 0x100D
+
+#define PHY_RX_OVRD_IN_LO 0x1005
+#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
+#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
+
+/* iATU registers */
+#define PCIE_ATU_VIEWPORT		0x900
+#define PCIE_ATU_REGION_INBOUND		(0x1 << 31)
+#define PCIE_ATU_REGION_OUTBOUND	(0x0 << 31)
+#define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
+#define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
+#define PCIE_ATU_CR1			0x904
+#define PCIE_ATU_TYPE_MEM		(0x0 << 0)
+#define PCIE_ATU_TYPE_IO		(0x2 << 0)
+#define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
+#define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
+#define PCIE_ATU_CR2			0x908
+#define PCIE_ATU_ENABLE			(0x1 << 31)
+#define PCIE_ATU_BAR_MODE_ENABLE	(0x1 << 30)
+#define PCIE_ATU_LOWER_BASE		0x90C
+#define PCIE_ATU_UPPER_BASE		0x910
+#define PCIE_ATU_LIMIT			0x914
+#define PCIE_ATU_LOWER_TARGET		0x918
+#define PCIE_ATU_BUS(x)			(((x) & 0xff) << 24)
+#define PCIE_ATU_DEV(x)			(((x) & 0x1f) << 19)
+#define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
+#define PCIE_ATU_UPPER_TARGET		0x91C
+
+/*
+ * PHY access functions
+ */
+static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
+{
+	u32 val;
+	u32 max_iterations = 10;
+	u32 wait_counter = 0;
+
+	do {
+		val = readl(dbi_base + PCIE_PHY_STAT);
+		val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
+		wait_counter++;
+
+		if (val == exp_val)
+			return 0;
+
+		udelay(1);
+	} while (wait_counter < max_iterations);
+
+	return -ETIMEDOUT;
+}
+
+static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
+{
+	u32 val;
+	int ret;
+
+	val = addr << PCIE_PHY_CTRL_DATA_LOC;
+	writel(val, dbi_base + PCIE_PHY_CTRL);
+
+	val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
+	writel(val, dbi_base + PCIE_PHY_CTRL);
+
+	ret = pcie_phy_poll_ack(dbi_base, 1);
+	if (ret)
+		return ret;
+
+	val = addr << PCIE_PHY_CTRL_DATA_LOC;
+	writel(val, dbi_base + PCIE_PHY_CTRL);
+
+	ret = pcie_phy_poll_ack(dbi_base, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
+static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
+{
+	u32 val, phy_ctl;
+	int ret;
+
+	ret = pcie_phy_wait_ack(dbi_base, addr);
+	if (ret)
+		return ret;
+
+	/* assert Read signal */
+	phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
+	writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
+
+	ret = pcie_phy_poll_ack(dbi_base, 1);
+	if (ret)
+		return ret;
+
+	val = readl(dbi_base + PCIE_PHY_STAT);
+	*data = val & 0xffff;
+
+	/* deassert Read signal */
+	writel(0x00, dbi_base + PCIE_PHY_CTRL);
+
+	ret = pcie_phy_poll_ack(dbi_base, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
+{
+	u32 var;
+	int ret;
+
+	/* write addr */
+	/* cap addr */
+	ret = pcie_phy_wait_ack(dbi_base, addr);
+	if (ret)
+		return ret;
+
+	var = data << PCIE_PHY_CTRL_DATA_LOC;
+	writel(var, dbi_base + PCIE_PHY_CTRL);
+
+	/* capture data */
+	var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
+	writel(var, dbi_base + PCIE_PHY_CTRL);
+
+	ret = pcie_phy_poll_ack(dbi_base, 1);
+	if (ret)
+		return ret;
+
+	/* deassert cap data */
+	var = data << PCIE_PHY_CTRL_DATA_LOC;
+	writel(var, dbi_base + PCIE_PHY_CTRL);
+
+	/* wait for ack de-assertion */
+	ret = pcie_phy_poll_ack(dbi_base, 0);
+	if (ret)
+		return ret;
+
+	/* assert wr signal */
+	var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
+	writel(var, dbi_base + PCIE_PHY_CTRL);
+
+	/* wait for ack */
+	ret = pcie_phy_poll_ack(dbi_base, 1);
+	if (ret)
+		return ret;
+
+	/* deassert wr signal */
+	var = data << PCIE_PHY_CTRL_DATA_LOC;
+	writel(var, dbi_base + PCIE_PHY_CTRL);
+
+	/* wait for ack de-assertion */
+	ret = pcie_phy_poll_ack(dbi_base, 0);
+	if (ret)
+		return ret;
+
+	writel(0x0, dbi_base + PCIE_PHY_CTRL);
+
+	return 0;
+}
+
+static int imx6_pcie_link_up(void)
+{
+	u32 rc, ltssm;
+	int rx_valid, temp;
+
+	/* link is debug bit 36, debug register 1 starts at bit 32 */
+	rc = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1);
+	if ((rc & PCIE_PHY_DEBUG_R1_LINK_UP) &&
+	    !(rc & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING))
+		return -EAGAIN;
+
+	/*
+	 * From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
+	 * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
+	 * If (MAC/LTSSM.state == Recovery.RcvrLock)
+	 * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
+	 * to gen2 is stuck
+	 */
+	pcie_phy_read((void *)MX6_DBI_ADDR, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
+	ltssm = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0) & 0x3F;
+
+	if (rx_valid & 0x01)
+		return 0;
+
+	if (ltssm != 0x0d)
+		return 0;
+
+	printf("transition to gen2 is stuck, reset PHY!\n");
+
+	pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp);
+	temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+	pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp);
+
+	udelay(3000);
+
+	pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp);
+	temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+	pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp);
+
+	return 0;
+}
+
+/*
+ * iATU region setup
+ */
+static int imx_pcie_regions_setup(void)
+{
+	/*
+	 * i.MX6 defines 16MB in the AXI address map for PCIe.
+	 *
+	 * That address space excepted the pcie registers is
+	 * split and defined into different regions by iATU,
+	 * with sizes and offsets as follows:
+	 *
+	 * 0x0100_0000 --- 0x010F_FFFF 1MB IORESOURCE_IO
+	 * 0x0110_0000 --- 0x01EF_FFFF 14MB IORESOURCE_MEM
+	 * 0x01F0_0000 --- 0x01FF_FFFF 1MB Cfg + Registers
+	 */
+
+	/* CMD reg:I/O space, MEM space, and Bus Master Enable */
+	setbits_le32(MX6_DBI_ADDR | PCI_COMMAND,
+		     PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+	/* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */
+	setbits_le32(MX6_DBI_ADDR + PCI_CLASS_REVISION,
+		     PCI_CLASS_BRIDGE_PCI << 16);
+
+	/* Region #0 is used for Outbound CFG space access. */
+	writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT);
+
+	writel(MX6_ROOT_ADDR, MX6_DBI_ADDR + PCIE_ATU_LOWER_BASE);
+	writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_BASE);
+	writel(MX6_ROOT_ADDR + MX6_ROOT_SIZE, MX6_DBI_ADDR + PCIE_ATU_LIMIT);
+
+	writel(0, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET);
+	writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_TARGET);
+	writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1);
+	writel(PCIE_ATU_ENABLE, MX6_DBI_ADDR + PCIE_ATU_CR2);
+
+	return 0;
+}
+
+/*
+ * PCI Express accessors
+ */
+static uint32_t get_bus_address(pci_dev_t d, int where)
+{
+	uint32_t va_address;
+
+	/* Reconfigure Region #0 */
+	writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT);
+
+	if (PCI_BUS(d) < 2)
+		writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1);
+	else
+		writel(PCIE_ATU_TYPE_CFG1, MX6_DBI_ADDR + PCIE_ATU_CR1);
+
+	if (PCI_BUS(d) == 0) {
+		va_address = MX6_DBI_ADDR;
+	} else {
+		writel(d << 8, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET);
+		va_address = MX6_IO_ADDR + SZ_16M - SZ_1M;
+	}
+
+	va_address += (where & ~0x3);
+
+	return va_address;
+}
+
+static int imx_pcie_addr_valid(pci_dev_t d)
+{
+	if ((PCI_BUS(d) == 0) && (PCI_DEV(d) > 1))
+		return -EINVAL;
+	if ((PCI_BUS(d) == 1) && (PCI_DEV(d) > 0))
+		return -EINVAL;
+	return 0;
+}
+
+/*
+ * Replace the original ARM DABT handler with a simple jump-back one.
+ *
+ * The problem here is that if we have a PCIe bridge attached to this PCIe
+ * controller, but no PCIe device is connected to the bridges' downstream
+ * port, the attempt to read/write from/to the config space will produce
+ * a DABT. This is a behavior of the controller and can not be disabled
+ * unfortuatelly.
+ *
+ * To work around the problem, we backup the current DABT handler address
+ * and replace it with our own DABT handler, which only bounces right back
+ * into the code.
+ */
+static void imx_pcie_fix_dabt_handler(bool set)
+{
+	extern uint32_t *_data_abort;
+	uint32_t *data_abort_addr = (uint32_t *)&_data_abort;
+
+	static const uint32_t data_abort_bounce_handler = 0xe25ef004;
+	uint32_t data_abort_bounce_addr = (uint32_t)&data_abort_bounce_handler;
+
+	static uint32_t data_abort_backup;
+
+	if (set) {
+		data_abort_backup = *data_abort_addr;
+		*data_abort_addr = data_abort_bounce_addr;
+	} else {
+		*data_abort_addr = data_abort_backup;
+	}
+}
+
+static int imx_pcie_read_config(struct pci_controller *hose, pci_dev_t d,
+				int where, u32 *val)
+{
+	uint32_t va_address;
+	int ret;
+
+	ret = imx_pcie_addr_valid(d);
+	if (ret) {
+		*val = 0xffffffff;
+		return ret;
+	}
+
+	va_address = get_bus_address(d, where);
+
+	/*
+	 * Read the PCIe config space. We must replace the DABT handler
+	 * here in case we got data abort from the PCIe controller, see
+	 * imx_pcie_fix_dabt_handler() description. Note that writing the
+	 * "val" with valid value is also imperative here as in case we
+	 * did got DABT, the val would contain random value.
+	 */
+	imx_pcie_fix_dabt_handler(true);
+	writel(0xffffffff, val);
+	*val = readl(va_address);
+	imx_pcie_fix_dabt_handler(false);
+
+	return 0;
+}
+
+static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
+			int where, u32 val)
+{
+	uint32_t va_address = 0;
+	int ret;
+
+	ret = imx_pcie_addr_valid(d);
+	if (ret)
+		return ret;
+
+	va_address = get_bus_address(d, where);
+
+	/*
+	 * Write the PCIe config space. We must replace the DABT handler
+	 * here in case we got data abort from the PCIe controller, see
+	 * imx_pcie_fix_dabt_handler() description.
+	 */
+	imx_pcie_fix_dabt_handler(true);
+	writel(val, va_address);
+	imx_pcie_fix_dabt_handler(false);
+
+	return 0;
+}
+
+/*
+ * Initial bus setup
+ */
+static int imx6_pcie_assert_core_reset(void)
+{
+	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN);
+	clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN);
+
+	return 0;
+}
+
+static int imx6_pcie_init_phy(void)
+{
+	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE);
+
+	clrsetbits_le32(&iomuxc_regs->gpr[12],
+			IOMUXC_GPR12_DEVICE_TYPE_MASK,
+			IOMUXC_GPR12_DEVICE_TYPE_RC);
+	clrsetbits_le32(&iomuxc_regs->gpr[12],
+			IOMUXC_GPR12_LOS_LEVEL_MASK,
+			IOMUXC_GPR12_LOS_LEVEL_9);
+
+	writel((0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_OFFSET) |
+	       (0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_OFFSET) |
+	       (20 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_OFFSET) |
+	       (127 << IOMUXC_GPR8_PCS_TX_SWING_FULL_OFFSET) |
+	       (127 << IOMUXC_GPR8_PCS_TX_SWING_LOW_OFFSET),
+	       &iomuxc_regs->gpr[8]);
+
+	return 0;
+}
+
+__weak int imx6_pcie_toggle_reset(void)
+{
+	/*
+	 * See 'PCI EXPRESS BASE SPECIFICATION, REV 3.0, SECTION 6.6.1'
+	 * for detailed understanding of the PCIe CR reset logic.
+	 *
+	 * The PCIe #PERST reset line _MUST_ be connected, otherwise your
+	 * design does not conform to the specification. You must wait at
+	 * least 20 mS after de-asserting the #PERST so the EP device can
+	 * do self-initialisation.
+	 *
+	 * In case your #PERST pin is connected to a plain GPIO pin of the
+	 * CPU, you can define CONFIG_PCIE_IMX_PERST_GPIO in your board's
+	 * configuration file and the condition below will handle the rest
+	 * of the reset toggling.
+	 *
+	 * In case your #PERST toggling logic is more complex, for example
+	 * connected via CPLD or somesuch, you can override this function
+	 * in your board file and implement reset logic as needed. You must
+	 * not forget to wait at least 20 mS after de-asserting #PERST in
+	 * this case either though.
+	 *
+	 * In case your #PERST line of the PCIe EP device is not connected
+	 * at all, your design is broken and you should fix your design,
+	 * otherwise you will observe problems like for example the link
+	 * not coming up after rebooting the system back from running Linux
+	 * that uses the PCIe as well OR the PCIe link might not come up in
+	 * Linux at all in the first place since it's in some non-reset
+	 * state due to being previously used in U-Boot.
+	 */
+#ifdef CONFIG_PCIE_IMX_PERST_GPIO
+	gpio_direction_output(CONFIG_PCIE_IMX_PERST_GPIO, 0);
+	mdelay(20);
+	gpio_set_value(CONFIG_PCIE_IMX_PERST_GPIO, 1);
+	mdelay(20);
+#else
+	puts("WARNING: Make sure the PCIe #PERST line is connected!\n");
+#endif
+	return 0;
+}
+
+static int imx6_pcie_deassert_core_reset(void)
+{
+	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	/* FIXME: Power-up GPIO goes here. */
+
+	/* Enable PCIe */
+	clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN);
+	setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN);
+
+	enable_pcie_clock();
+
+	/*
+	 * Wait for the clock to settle a bit, when the clock are sourced
+	 * from the CPU, we need about 30mS to settle.
+	 */
+	mdelay(50);
+
+	imx6_pcie_toggle_reset();
+
+	return 0;
+}
+
+static int imx_pcie_link_up(void)
+{
+	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	uint32_t tmp;
+	int count = 0;
+
+	imx6_pcie_assert_core_reset();
+	imx6_pcie_init_phy();
+	imx6_pcie_deassert_core_reset();
+
+	imx_pcie_regions_setup();
+
+	/*
+	 * FIXME: Force the PCIe RC to Gen1 operation
+	 * The RC must be forced into Gen1 mode before bringing the link
+	 * up, otherwise no downstream devices are detected. After the
+	 * link is up, a managed Gen1->Gen2 transition can be initiated.
+	 */
+	tmp = readl(MX6_DBI_ADDR + 0x7c);
+	tmp &= ~0xf;
+	tmp |= 0x1;
+	writel(tmp, MX6_DBI_ADDR + 0x7c);
+
+	/* LTSSM enable, starting link. */
+	setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE);
+
+	while (!imx6_pcie_link_up()) {
+		udelay(10);
+		count++;
+		if (count >= 2000) {
+			debug("phy link never came up\n");
+			debug("DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
+			      readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0),
+			      readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1));
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+void imx_pcie_init(void)
+{
+	/* Static instance of the controller. */
+	static struct pci_controller	pcc;
+	struct pci_controller		*hose = &pcc;
+	int ret;
+
+	memset(&pcc, 0, sizeof(pcc));
+
+	/* PCI I/O space */
+	pci_set_region(&hose->regions[0],
+		       MX6_IO_ADDR, MX6_IO_ADDR,
+		       MX6_IO_SIZE, PCI_REGION_IO);
+
+	/* PCI memory space */
+	pci_set_region(&hose->regions[1],
+		       MX6_MEM_ADDR, MX6_MEM_ADDR,
+		       MX6_MEM_SIZE, PCI_REGION_MEM);
+
+	/* System memory space */
+	pci_set_region(&hose->regions[2],
+		       MMDC0_ARB_BASE_ADDR, MMDC0_ARB_BASE_ADDR,
+		       0xefffffff, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+	hose->region_count = 3;
+
+	pci_set_ops(hose,
+		    pci_hose_read_config_byte_via_dword,
+		    pci_hose_read_config_word_via_dword,
+		    imx_pcie_read_config,
+		    pci_hose_write_config_byte_via_dword,
+		    pci_hose_write_config_word_via_dword,
+		    imx_pcie_write_config);
+
+	/* Start the controller. */
+	ret = imx_pcie_link_up();
+
+	if (!ret) {
+		pci_register_hose(hose);
+		hose->last_busno = pci_hose_scan(hose);
+	}
+}
+
+/* Probe function. */
+void pci_init_board(void)
+{
+	imx_pcie_init();
+}