drivers/pci : move pci drivers to drivers/pci

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 412 insertions, 0 deletions

diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
new file mode 100644
index 0000000..acfda83
--- /dev/null
+++ b/drivers/pci/pci_auto.c
@@ -0,0 +1,412 @@
+/*
+ * arch/ppc/kernel/pci_auto.c
+ *
+ * PCI autoconfiguration library
+ *
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+
+#include <pci.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+#define	PCIAUTO_IDE_MODE_MASK		0x05
+
+/* the user can define CFG_PCI_CACHE_LINE_SIZE to avoid problems */
+#ifndef CFG_PCI_CACHE_LINE_SIZE
+#define CFG_PCI_CACHE_LINE_SIZE	8
+#endif
+
+/*
+ *
+ */
+
+void pciauto_region_init(struct pci_region* res)
+{
+	/*
+	 * Avoid allocating PCI resources from address 0 -- this is illegal
+	 * according to PCI 2.1 and moreover, this is known to cause Linux IDE
+	 * drivers to fail. Use a reasonable starting value of 0x1000 instead.
+	 */
+	res->bus_lower = res->bus_start ? res->bus_start : 0x1000;
+}
+
+void pciauto_region_align(struct pci_region *res, unsigned long size)
+{
+	res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1;
+}
+
+int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar)
+{
+	unsigned long addr;
+
+	if (!res) {
+		DEBUGF("No resource");
+		goto error;
+	}
+
+	addr = ((res->bus_lower - 1) | (size - 1)) + 1;
+
+	if (addr - res->bus_start + size > res->size) {
+		DEBUGF("No room in resource");
+		goto error;
+	}
+
+	res->bus_lower = addr + size;
+
+	DEBUGF("address=0x%lx bus_lower=%x", addr, res->bus_lower);
+
+	*bar = addr;
+	return 0;
+
+ error:
+	*bar = 0xffffffff;
+	return -1;
+}
+
+/*
+ *
+ */
+
+void pciauto_setup_device(struct pci_controller *hose,
+			  pci_dev_t dev, int bars_num,
+			  struct pci_region *mem,
+			  struct pci_region *prefetch,
+			  struct pci_region *io)
+{
+	unsigned int bar_value, bar_response, bar_size;
+	unsigned int cmdstat = 0;
+	struct pci_region *bar_res;
+	int bar, bar_nr = 0;
+	int found_mem64 = 0;
+
+	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
+	cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
+
+	for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {
+		/* Tickle the BAR and get the response */
+		pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
+		pci_hose_read_config_dword(hose, dev, bar, &bar_response);
+
+		/* If BAR is not implemented go to the next BAR */
+		if (!bar_response)
+			continue;
+
+		found_mem64 = 0;
+
+		/* Check the BAR type and set our address mask */
+		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
+			bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
+				   & 0xffff) + 1;
+			bar_res = io;
+
+			DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size);
+		} else {
+			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
+			     PCI_BASE_ADDRESS_MEM_TYPE_64)
+				found_mem64 = 1;
+
+			bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1;
+			if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
+				bar_res = prefetch;
+			else
+				bar_res = mem;
+
+			DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size);
+		}
+
+		if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
+			/* Write it out and update our limit */
+			pci_hose_write_config_dword(hose, dev, bar, bar_value);
+
+			/*
+			 * If we are a 64-bit decoder then increment to the
+			 * upper 32 bits of the bar and force it to locate
+			 * in the lower 4GB of memory.
+			 */
+			if (found_mem64) {
+				bar += 4;
+				pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
+			}
+
+			cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
+				PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
+		}
+
+		DEBUGF("\n");
+
+		bar_nr++;
+	}
+
+	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
+	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
+		CFG_PCI_CACHE_LINE_SIZE);
+	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+}
+
+void pciauto_prescan_setup_bridge(struct pci_controller *hose,
+					 pci_dev_t dev, int sub_bus)
+{
+	struct pci_region *pci_mem = hose->pci_mem;
+	struct pci_region *pci_prefetch = hose->pci_prefetch;
+	struct pci_region *pci_io = hose->pci_io;
+	unsigned int cmdstat;
+
+	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
+
+	/* Configure bus number registers */
+	pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
+				   PCI_BUS(dev) - hose->first_busno);
+	pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
+				   sub_bus - hose->first_busno);
+	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
+
+	if (pci_mem) {
+		/* Round memory allocator to 1MB boundary */
+		pciauto_region_align(pci_mem, 0x100000);
+
+		/* Set up memory and I/O filter limits, assume 32-bit I/O space */
+		pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
+					(pci_mem->bus_lower & 0xfff00000) >> 16);
+
+		cmdstat |= PCI_COMMAND_MEMORY;
+	}
+
+	if (pci_prefetch) {
+		/* Round memory allocator to 1MB boundary */
+		pciauto_region_align(pci_prefetch, 0x100000);
+
+		/* Set up memory and I/O filter limits, assume 32-bit I/O space */
+		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
+					(pci_prefetch->bus_lower & 0xfff00000) >> 16);
+
+		cmdstat |= PCI_COMMAND_MEMORY;
+	} else {
+		/* We don't support prefetchable memory for now, so disable */
+		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
+		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
+	}
+
+	if (pci_io) {
+		/* Round I/O allocator to 4KB boundary */
+		pciauto_region_align(pci_io, 0x1000);
+
+		pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
+					(pci_io->bus_lower & 0x0000f000) >> 8);
+		pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
+					(pci_io->bus_lower & 0xffff0000) >> 16);
+
+		cmdstat |= PCI_COMMAND_IO;
+	}
+
+	/* Enable memory and I/O accesses, enable bus master */
+	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER);
+}
+
+void pciauto_postscan_setup_bridge(struct pci_controller *hose,
+					  pci_dev_t dev, int sub_bus)
+{
+	struct pci_region *pci_mem = hose->pci_mem;
+	struct pci_region *pci_prefetch = hose->pci_prefetch;
+	struct pci_region *pci_io = hose->pci_io;
+
+	/* Configure bus number registers */
+	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
+				   sub_bus - hose->first_busno);
+
+	if (pci_mem) {
+		/* Round memory allocator to 1MB boundary */
+		pciauto_region_align(pci_mem, 0x100000);
+
+		pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
+					(pci_mem->bus_lower-1) >> 16);
+	}
+
+	if (pci_prefetch) {
+		/* Round memory allocator to 1MB boundary */
+		pciauto_region_align(pci_prefetch, 0x100000);
+
+		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
+					(pci_prefetch->bus_lower-1) >> 16);
+	}
+
+	if (pci_io) {
+		/* Round I/O allocator to 4KB boundary */
+		pciauto_region_align(pci_io, 0x1000);
+
+		pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
+					((pci_io->bus_lower-1) & 0x0000f000) >> 8);
+		pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
+					((pci_io->bus_lower-1) & 0xffff0000) >> 16);
+	}
+}
+
+/*
+ *
+ */
+
+void pciauto_config_init(struct pci_controller *hose)
+{
+	int i;
+
+	hose->pci_io = hose->pci_mem = NULL;
+
+	for (i=0; i<hose->region_count; i++) {
+		switch(hose->regions[i].flags) {
+		case PCI_REGION_IO:
+			if (!hose->pci_io ||
+			    hose->pci_io->size < hose->regions[i].size)
+				hose->pci_io = hose->regions + i;
+			break;
+		case PCI_REGION_MEM:
+			if (!hose->pci_mem ||
+			    hose->pci_mem->size < hose->regions[i].size)
+				hose->pci_mem = hose->regions + i;
+			break;
+		case (PCI_REGION_MEM | PCI_REGION_PREFETCH):
+			if (!hose->pci_prefetch ||
+			    hose->pci_prefetch->size < hose->regions[i].size)
+				hose->pci_prefetch = hose->regions + i;
+			break;
+		}
+	}
+
+
+	if (hose->pci_mem) {
+		pciauto_region_init(hose->pci_mem);
+
+		DEBUGF("PCI Autoconfig: Bus Memory region: [%lx-%lx],\n"
+		       "\t\tPhysical Memory [%x-%x]\n",
+		    hose->pci_mem->bus_start,
+		    hose->pci_mem->bus_start + hose->pci_mem->size - 1,
+		    hose->pci_mem->phys_start,
+		    hose->pci_mem->phys_start + hose->pci_mem->size - 1);
+	}
+
+	if (hose->pci_prefetch) {
+		pciauto_region_init(hose->pci_prefetch);
+
+		DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [%lx-%lx],\n"
+		       "\t\tPhysical Memory [%x-%x]\n",
+		    hose->pci_prefetch->bus_start,
+		    hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1,
+		    hose->pci_prefetch->phys_start,
+		    hose->pci_prefetch->phys_start +
+				hose->pci_prefetch->size - 1);
+	}
+
+	if (hose->pci_io) {
+		pciauto_region_init(hose->pci_io);
+
+		DEBUGF("PCI Autoconfig: Bus I/O region: [%lx-%lx],\n"
+		       "\t\tPhysical Memory: [%x-%x]\n",
+		    hose->pci_io->bus_start,
+		    hose->pci_io->bus_start + hose->pci_io->size - 1,
+		    hose->pci_io->phys_start,
+		    hose->pci_io->phys_start + hose->pci_io->size - 1);
+
+	}
+}
+
+/* HJF: Changed this to return int. I think this is required
+ * to get the correct result when scanning bridges
+ */
+int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned int sub_bus = PCI_BUS(dev);
+	unsigned short class;
+	unsigned char prg_iface;
+	int n;
+
+	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
+
+	switch(class) {
+	case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
+		DEBUGF("PCI AutoConfig: Found PowerPC device\n");
+		pciauto_setup_device(hose, dev, 6, hose->pci_mem,
+				     hose->pci_prefetch, hose->pci_io);
+		break;
+
+	case PCI_CLASS_BRIDGE_PCI:
+		hose->current_busno++;
+		pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
+
+		DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));
+
+		/* Passing in current_busno allows for sibling P2P bridges */
+		pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
+		/*
+		 * need to figure out if this is a subordinate bridge on the bus
+		 * to be able to properly set the pri/sec/sub bridge registers.
+		 */
+		n = pci_hose_scan_bus(hose, hose->current_busno);
+
+		/* figure out the deepest we've gone for this leg */
+		sub_bus = max(n, sub_bus);
+		pciauto_postscan_setup_bridge(hose, dev, sub_bus);
+
+		sub_bus = hose->current_busno;
+		break;
+
+	case PCI_CLASS_STORAGE_IDE:
+		pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface);
+		if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
+			DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");
+			return sub_bus;
+		}
+
+		pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
+		break;
+
+	case PCI_CLASS_BRIDGE_CARDBUS:
+		/* just do a minimal setup of the bridge, let the OS take care of the rest */
+		pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
+
+		DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev));
+
+		hose->current_busno++;
+		break;
+
+#ifdef CONFIG_MPC5200
+	case PCI_CLASS_BRIDGE_OTHER:
+		DEBUGF("PCI Autoconfig: Skipping bridge device %d\n",
+		       PCI_DEV(dev));
+		break;
+#endif
+#ifdef CONFIG_MPC834X
+	case PCI_CLASS_BRIDGE_OTHER:
+		/*
+		 * The host/PCI bridge 1 seems broken in 8349 - it presents
+		 * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
+		 * device claiming resources io/mem/irq.. we only allow for
+		 * the PIMMR window to be allocated (BAR0 - 1MB size)
+		 */
+		DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n");
+		pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
+		break;
+#endif
+	default:
+		pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
+		break;
+	}
+
+	return sub_bus;
+}
+
+#endif /* CONFIG_PCI */