Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging

5 files changed, 9 insertions, 7 deletions

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 92c3dca..b030498 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -459,11 +459,11 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
 
 	/* Set DMA 8 TX / 8 RX Head pointers to 0 */
 	addr = &adap_emac->TX0HDP;
-	for(cnt = 0; cnt < 16; cnt++)
+	for (cnt = 0; cnt < 8; cnt++)
 		writel(0, addr++);
 
 	addr = &adap_emac->RX0HDP;
-	for(cnt = 0; cnt < 16; cnt++)
+	for (cnt = 0; cnt < 8; cnt++)
 		writel(0, addr++);
 
 	/* Clear Statistics (do this before setting MacControl register) */
@@ -692,8 +692,10 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
 	davinci_invalidate_rx_descs();
 
 	rx_curr_desc = emac_rx_active_head;
+	if (!rx_curr_desc)
+		return 0;
 	status = rx_curr_desc->pkt_flag_len;
-	if ((rx_curr_desc) && ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0)) {
+	if ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0) {
 		if (status & EMAC_CPPI_RX_ERROR_FRAME) {
 			/* Error in packet - discard it and requeue desc */
 			printf ("WARN: emac_rcv_pkt: Error in packet\n");
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 2f2185d..196989b 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -5453,7 +5453,7 @@ e1000_initialize(bd_t * bis)
 	for (i = 0; (devno = pci_find_devices(e1000_supported, i)) >= 0; i++) {
 		/*
 		 * These will never get freed due to errors, this allows us to
-		 * perform SPI EEPROM programming from U-boot, for example.
+		 * perform SPI EEPROM programming from U-Boot, for example.
 		 */
 		struct eth_device *nic = malloc(sizeof(*nic));
 		struct e1000_hw *hw = malloc(sizeof(*hw));
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index fdbd584..53c4966 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -455,7 +455,7 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr)
 
 	/*
 	 * Management Complex cores should be held at reset out of POR.
-	 * U-boot should be the first software to touch MC. To be safe,
+	 * U-Boot should be the first software to touch MC. To be safe,
 	 * we reset all cores again by setting GCR1 to 0. It doesn't do
 	 * anything if they are held at reset. After we setup the firmware
 	 * we kick off MC by deasserting the reset bit for core 0, and
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index c4dd01e..3526876 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -1,7 +1,7 @@
 /*------------------------------------------------------------------------
  * lan91c96.c
  * This is a driver for SMSC's LAN91C96 single-chip Ethernet device, based
- * on the SMC91111 driver from U-boot.
+ * on the SMC91111 driver from U-Boot.
  *
  * (C) Copyright 2002
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
index 887cfd9..71d133c 100644
--- a/drivers/net/ne2000_base.c
+++ b/drivers/net/ne2000_base.c
@@ -650,7 +650,7 @@ dp83902a_poll(void)
 }
 
 
-/* U-boot specific routines */
+/* U-Boot specific routines */
 static u8 *pbuf = NULL;
 
 static int pkey = -1;