summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorAmit Virdi <amit.virdi@st.com>2012-03-26 00:09:59 +0000
committerJoe Hershberger <joe.hershberger@ni.com>2012-04-04 10:47:53 -0500
commitcafabe1995af20d02a000a984ae38693a6f9b900 (patch)
tree19098eba30c8f6b840be3425b9b7f82601f44ad7 /drivers/net
parent20a5dde1495c74fd6c8b977a2619538b6bee8e0b (diff)
downloadu-boot-imx-cafabe1995af20d02a000a984ae38693a6f9b900.zip
u-boot-imx-cafabe1995af20d02a000a984ae38693a6f9b900.tar.gz
u-boot-imx-cafabe1995af20d02a000a984ae38693a6f9b900.tar.bz2
net/designware: Change timeout loop implementation
The new implementation changes the timeout loop implementation to avoid 1 ms delay in each failing test. It also configures the delay to 10usec. Signed-off-by: Amit Virdi <amit.virdi@st.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/designware.c54
1 files changed, 38 insertions, 16 deletions
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 987469a..e8e669b 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -108,16 +108,20 @@ static int mac_reset(struct eth_device *dev)
struct eth_mac_regs *mac_p = priv->mac_regs_p;
struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ ulong start;
int timeout = CONFIG_MACRESET_TIMEOUT;
writel(DMAMAC_SRST, &dma_p->busmode);
writel(MII_PORTSELECT, &mac_p->conf);
- do {
+ start = get_timer(0);
+ while (get_timer(start) < timeout) {
if (!(readl(&dma_p->busmode) & DMAMAC_SRST))
return 0;
- udelay(1000);
- } while (timeout--);
+
+ /* Try again after 10usec */
+ udelay(10);
+ };
return -1;
}
@@ -273,6 +277,7 @@ static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val)
{
struct dw_eth_dev *priv = dev->priv;
struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ ulong start;
u32 miiaddr;
int timeout = CONFIG_MDIO_TIMEOUT;
@@ -281,13 +286,16 @@ static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val)
writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
- do {
+ start = get_timer(0);
+ while (get_timer(start) < timeout) {
if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
*val = readl(&mac_p->miidata);
return 0;
}
- udelay(1000);
- } while (timeout--);
+
+ /* Try again after 10usec */
+ udelay(10);
+ };
return -1;
}
@@ -296,6 +304,7 @@ static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
{
struct dw_eth_dev *priv = dev->priv;
struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ ulong start;
u32 miiaddr;
int ret = -1, timeout = CONFIG_MDIO_TIMEOUT;
u16 value;
@@ -306,13 +315,16 @@ static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
- do {
+ start = get_timer(0);
+ while (get_timer(start) < timeout) {
if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
ret = 0;
break;
}
- udelay(1000);
- } while (timeout--);
+
+ /* Try again after 10usec */
+ udelay(10);
+ };
/* Needed as a fix for ST-Phy */
eth_mdio_read(dev, addr, reg, &value);
@@ -353,18 +365,23 @@ static int dw_reset_phy(struct eth_device *dev)
{
struct dw_eth_dev *priv = dev->priv;
u16 ctrl;
+ ulong start;
int timeout = CONFIG_PHYRESET_TIMEOUT;
u32 phy_addr = priv->address;
eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET);
- do {
+
+ start = get_timer(0);
+ while (get_timer(start) < timeout) {
eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
if (!(ctrl & BMCR_RESET))
break;
- udelay(1000);
- } while (timeout--);
- if (timeout < 0)
+ /* Try again after 10usec */
+ udelay(10);
+ };
+
+ if (get_timer(start) >= CONFIG_PHYRESET_TIMEOUT)
return -1;
#ifdef CONFIG_PHY_RESET_DELAY
@@ -381,6 +398,7 @@ static int configure_phy(struct eth_device *dev)
#if defined(CONFIG_DW_AUTONEG)
u16 bmsr;
u32 timeout;
+ ulong start;
u16 anlpar, btsr;
#else
u16 ctrl;
@@ -419,12 +437,16 @@ static int configure_phy(struct eth_device *dev)
/* Read the phy status register and populate priv structure */
#if defined(CONFIG_DW_AUTONEG)
timeout = CONFIG_AUTONEG_TIMEOUT;
- do {
+ start = get_timer(0);
+
+ while (get_timer(start) < timeout) {
eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr);
if (bmsr & BMSR_ANEGCOMPLETE)
break;
- udelay(1000);
- } while (timeout--);
+
+ /* Try again after 10usec */
+ udelay(10);
+ };
eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);