summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorVipin Kumar <vipin.kumar@st.com>2012-03-26 00:09:56 +0000
committerJoe Hershberger <joe.hershberger@ni.com>2012-04-04 10:47:21 -0500
commit13edd1706c56371dc6a67f7bef874f6d8b7af8eb (patch)
tree47d3dd15ce60a8bfc0ec7b6318f9764bcc6917eb /drivers/net
parentaa51005c3f7e517164fa000d68672041f6c4191f (diff)
downloadu-boot-imx-13edd1706c56371dc6a67f7bef874f6d8b7af8eb.zip
u-boot-imx-13edd1706c56371dc6a67f7bef874f6d8b7af8eb.tar.gz
u-boot-imx-13edd1706c56371dc6a67f7bef874f6d8b7af8eb.tar.bz2
net/designware: Try configuring phy on each dw_eth_init
Phy autonegotiation works only when the ethernet cable is plugged in. Since the phy was configured only at the init time, a plugged in cable was necessary to initialize the phy properly. This patch keeps a flag to check if the phy initialization has succeeded, and calls configure_phy routine at every init if this flag reports otherwise. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/designware.c50
-rw-r--r--drivers/net/designware.h1
2 files changed, 30 insertions, 21 deletions
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 933032c..ebb1fff 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -32,6 +32,8 @@
#include <asm/io.h>
#include "designware.h"
+static int configure_phy(struct eth_device *dev);
+
static void tx_descs_init(struct eth_device *dev)
{
struct dw_eth_dev *priv = dev->priv;
@@ -144,6 +146,9 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis)
struct eth_dma_regs *dma_p = priv->dma_regs_p;
u32 conf;
+ if (priv->phy_configured != 1)
+ configure_phy(dev);
+
/* Reset ethernet hardware */
if (mac_reset(dev) < 0)
return -1;
@@ -422,23 +427,26 @@ static int configure_phy(struct eth_device *dev)
eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);
- if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
- priv->speed = SPEED_1000M;
- if (btsr & PHY_1000BTSR_1000FD)
- priv->duplex = FULL_DUPLEX;
- else
- priv->duplex = HALF_DUPLEX;
- } else {
- if (anlpar & LPA_100)
- priv->speed = SPEED_100M;
- else
- priv->speed = SPEED_10M;
-
- if (anlpar & (LPA_10FULL | LPA_100FULL))
- priv->duplex = FULL_DUPLEX;
- else
- priv->duplex = HALF_DUPLEX;
- }
+ if (bmsr & BMSR_ANEGCOMPLETE) {
+ if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
+ priv->speed = SPEED_1000M;
+ if (btsr & PHY_1000BTSR_1000FD)
+ priv->duplex = FULL_DUPLEX;
+ else
+ priv->duplex = HALF_DUPLEX;
+ } else {
+ if (anlpar & LPA_100)
+ priv->speed = SPEED_100M;
+ else
+ priv->speed = SPEED_10M;
+
+ if (anlpar & (LPA_10FULL | LPA_100FULL))
+ priv->duplex = FULL_DUPLEX;
+ else
+ priv->duplex = HALF_DUPLEX;
+ }
+ } else
+ return -1;
#else
if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0)
return -1;
@@ -455,6 +463,8 @@ static int configure_phy(struct eth_device *dev)
else
priv->speed = SPEED_10M;
#endif
+ priv->phy_configured = 1;
+
return 0;
}
@@ -515,14 +525,12 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
DW_DMA_BASE_OFFSET);
priv->address = phy_addr;
+ priv->phy_configured = 0;
if (mac_reset(dev) < 0)
return -1;
- if (configure_phy(dev) < 0) {
- printf("Phy could not be configured\n");
- return -1;
- }
+ configure_phy(dev);
dev->init = dw_eth_init;
dev->send = dw_eth_send;
diff --git a/drivers/net/designware.h b/drivers/net/designware.h
index 42133b3..abf729d 100644
--- a/drivers/net/designware.h
+++ b/drivers/net/designware.h
@@ -238,6 +238,7 @@ struct dw_eth_dev {
u32 duplex;
u32 tx_currdescnum;
u32 rx_currdescnum;
+ u32 phy_configured;
u32 padding;
struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];