summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorFelix Radensky <felix@embedded-sol.com>2009-05-31 20:44:15 +0300
committerBen Warren <biggerbadderben@gmail.com>2009-06-08 22:57:21 -0700
commit0c24dec550ddb7d86b8bfdd8645b18479f73e6e2 (patch)
tree96f0477552ff68214b03adb54ff14152220ea239 /drivers/net
parentd65e34d12514de2bbe3b8f519761d641c081bad0 (diff)
downloadu-boot-imx-0c24dec550ddb7d86b8bfdd8645b18479f73e6e2.zip
u-boot-imx-0c24dec550ddb7d86b8bfdd8645b18479f73e6e2.tar.gz
u-boot-imx-0c24dec550ddb7d86b8bfdd8645b18479f73e6e2.tar.bz2
ppc4xx/net: Fix MDIO clock setup
This patch fixes MDIO clock setup in case when OPB frequency is 100MHz. Current code assumes that the value of sysinfo.freqOPB is 100000000 when OPB frequency is 100MHz. In reality it is 100000001. As a result MDIO clock is set to incorrect value, larger than 2.5MHz, thus violating the standard. This in not a problem on boards equipped with Marvell PHYs (e.g. Canyonlands), since those PHYs support MDIO clocks up to 8.3MHz, but can be a problem for other PHYs (e.g. Realtek ones). Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/4xx_enet.c10
1 files changed, 6 insertions, 4 deletions
diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c
index 918373b..7bf3e0a 100644
--- a/drivers/net/4xx_enet.c
+++ b/drivers/net/4xx_enet.c
@@ -871,6 +871,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
+ u32 opbfreq;
sys_info_t sysinfo;
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
@@ -997,12 +998,13 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
/* Whack the M1 register */
mode_reg = 0x0;
mode_reg &= ~0x00000038;
- if (sysinfo.freqOPB <= 50000000);
- else if (sysinfo.freqOPB <= 66666667)
+ opbfreq = sysinfo.freqOPB / 1000000;
+ if (opbfreq <= 50);
+ else if (opbfreq <= 66)
mode_reg |= EMAC_M1_OBCI_66;
- else if (sysinfo.freqOPB <= 83333333)
+ else if (opbfreq <= 83)
mode_reg |= EMAC_M1_OBCI_83;
- else if (sysinfo.freqOPB <= 100000000)
+ else if (opbfreq <= 100)
mode_reg |= EMAC_M1_OBCI_100;
else
mode_reg |= EMAC_M1_OBCI_GT100;